Effects of support and additive on oxidation state and activity of Pt catalyst in propane combustion

The effects of support and additive on the oxidation state and catalytic activity of Pt catalyst in the low temperature propane combustion were systematically investigated on Pt/MgO, Pt/Al₂O₃ and Pt/SiO₂–Al₂O₃. The catalytic activity varied much with both support materials and additives. The catalyst on the more acidic support showed higher activity, and the catalytic activity on every support materials increased as the electronegativity of additives increased, while some additives decreased the activity. The oxidation state of platinum, estimated by white line intensity of Pt L_III-edge XANES spectrum, also varied with the support and additives, and additives with higher electronegativity greatly prevented the platinum from its oxidation under oxidising atmosphere. Among almost all the catalysts with various supports and various additives, a clear relationship was observed between the oxidation state of platinum and the catalytic activity; the more metallic platinum showed higher activity. Thus, it was concluded that the total electrophilic/electrophobic property derived from those of the support and additive controls the oxidation state of platinum, which intensively affects the catalytic activity; i.e. higher electrophilic property provides less oxidised platinum, resulting in high catalytic activity. The mechanism of this effect was also discussed on the basis of thermochemical data, and it was proposed that the electrophobic materials promote the noble metal oxidation since the noble metal oxo-anion such as PtO^δ− is more stabilised with electrophobic cation.     

Synthesis of poly(α-thiophenediyl)benzylidene with high molecular weight and its thermal stability

Summary The synthesis of poly(-thiophenediyl)benzylidene (PTB) with high molecular weight is described. Number-average degrees of polymerization reached about 74. The characterizations of the polymer was investigated by ¹H-NMR, ¹³C-NMR, IR, and UV-VIS spectra. The polymer with well-defined structure and high molecular weight was obtained by polymerization at low temperature and in polar solvent. This polymer was thermally stable and a thermal decomposition took place at 391°C under nitrogen and at 370°C under air. The glass transformation temperature was 117°C and this PTB was nonfusible.     

Surface active N-acylglutamate: I. Preparation of long chain N-acylglutamic acid

Long chain N-acylglutamic acid was prepared in a high yield by a reaction of glutamic acid with fatty acid chloride in a mixed solvent of water and a water miscible organic solvent such as acetone, methyl ethyl ketone, dioxane, tetrahydrofuran,t-butyl alcohol or cyclohexanone. In this reaction the composition of the mixed solvent influenced the yield of N-acylated glutamic acid and the best yield was obtained when the reaction was carried out in the mixed solvent comprising 30–60% v/v of the organic solvent. Long chain N-acylaspartic acid was also obtained in a high yield by the same method. As the other method to obtain N-lauroyl-D L-glutamic acid, it was examined that N-acyl-α-aminoglutarodinitrile which was obtained by a reaction of α-aminoglutarodinitrile with fatty acid chloride was hydrolyzed with an aqueous alkaline solution. The salts of long chain N-acylglutamic acid are known as the surface active agents that react mildly on the human skin.     

Microstructure of carbon spherules

Carbon spherules were formed from a mixture of polyethylene with 5–10 wt% Polyvinylchloride under pressure of 30 MPa. The spherules were embedded in a resin and thin-sectioned with a diamond knife. Alignment of small aromatic layers in the spherules was studied by transmission electron microscopy using dark-field image and microdiffraction techniques. Based on the obtained dark-field images at various positions of the aperture on the 002 diffraction ring, a structural model for the as-prepared spherules has been proposed. In this model small aromatic layers are assumed to align approximately on circular conical surfaces with a common vertex in the spherule at or near the center of the spherule. The proposed model is supported by an electron microdiffraction study of various micro-areas of sections of the spherules. The model is also consistent with the deformation of spherules into thick disks and formation of a definite system of cracks in heat-treatment to 2800°C as revealed by scanning electron microscopy.     

Orientation in uniaxially drawn polystyrene plasticized by CO2 sorption

Uniaxial drawing experiments of the polystyrene films plasticized by a sorption of compressed CO₂ gas at pressures up to about 18 MPa were carried out with strain rates ε of 0.0290 and 0.0079 s^?1. The drawing was performed successfully with draw ratio λ up to 4 at the temperatures of 308.15, 318.15, 328.15, and 338.15 K. The Hermans orientation function f of the drawn samples was determined from the dichroic ratio measured by an infrared spectrophotmeter. While f value increases with increasing ε or λ, it decreases with increasing CO₂ pressure or temperature. © 1995 John Wiley & Sons, Inc.     

Characterization of highly active silver catalyst for NOx reduction in lean-burning engine exhaust

A new Ag/Al₂O₃ catalyst for removing NOx in lean exhaust gas was developed. Oxidized Ag/Al₂O₃ catalyst is highly active for reduction of NOx with ethanol and propene, whereas reduced Ag/Al₂O₃ catalyst is less active for these reactions. Selectivity to N₂ is also high on the oxidized Ag/Al₂O₃ compared to that on the reduced Ag/Al₂O₃. XRD and SEM studies of these two types of Ag catalysts suggest that oxidation induces an interaction between Ag and the support, where the particles are grown in large size. In contrast, the metallic Ag particles are finely dispersed by the reduction process. Although dispersion of Ag particles is decreased by the oxidation process, the catalytic activity is increased. This suggests that the Ag-alumina sites created in the high temperature oxidizing environment are active in catalytic reduction of NOx. This revised version was published online in July 2006 with corrections to the Cover Date.     

Structural study of hexane-soluble products from hydroliquefaction of three Yallourn brown coal lithotypes over molten salt catalysts

The hexane-soluble fractions of hydroliquefied products from three Yallourn brown coal lithotypes have been separated into five fractions by combined silica-alumina packed column chromatography. Analyses of various fractions by g.c.-m.s. permitted the identification of ≈50 components in the saturate fraction and 40 components in the diaromatic fraction, together with 30 components in the monoaromatics. The components identified were quite similar among hexane-soluble portions of all three lithotypes. A marked predominance of even carbon number alkane (C₂₃-C₂₉) was observed in the hydrocarbon fractions from pale lithotype over $\text{ZnCl}{}_2\text{KCl}$, and medium light lithotype over both pure ZnCl₂ and $\text{ZnCl}{}_2\text{KCl}$. However, medium dark lithotype over both melt catalysts produced a saturate fraction with an odd carbon number(C₂₂-C₂₈) preference. Based on spectral methods, Soxhlet extracts obtained from untreated lithotypes (hexane and benzene solubles) were characterized as complex mixtures of higher molecular weight(300–1000) aliphatic hydrocarbons, which were supposed to be a precursor of the saturates produced from the corresponding lithotype in the catalytic hydroliquefaction.     

Interaction of cation-exchange membrane with polycation I. Poly(N-methyl-4-vinylpyridinium chloride)

We elucidated the effect of the molecular weight of poly(N-methyl-4-vinylpyridinium chloride) (PMVP) on its adsorbed or ion-exchanged amount on the cation-exchange membrane and the preferntial permselectivity of the membrane for sodium ion to calcium ion. The amount of the adsorbed or ion-exchanged PMVP increases with time and then attains to a definite value at a definite concentration. Also, the ultimate value increases with increasing the concentration of PMVP. When the molecular weight of PMVP is 3090, the ratio of the pyridinium groups of PMVP ion-exchanged with the sulfonic acid groups on the membrane surface to the total pyridinium groups of the cohered PMVP is in the range of 70–80%. The relative transport number of calcium ions to sodium ions(P_Na^Ca) decreases with increasing the amount of adsorbed or ion-exchanged PMVP and the numbe rof non-ion-exchanged pyridinium groups of PMVP and the number of non-ion-exchanged pyridinium groups of PMVP on the membrane surface. The smaller the molecular weight of PMVP, the more the adsorbed or ion-exchanged amount and the more preferable the permselectivity for sodium ion.     

Relationship between oxidative stability of vitamin E and production of fatty acids in oils during microwave heating

Effects of microwave heating on the oxidative stability ofd-tocopherols were studied in relation to the production of fatty acids in oils. During microwave heating, the stability of tocopherols decreased in the orderδ>β>γ>α. This order did not depend on the types of ethyl esters of fatty acids or oils present. But, the shorter the chainlength and the lower the degree of unsaturation of the fatty acid ethyl esters, the greater was the reduction in amount of individual tocopherols. A similar tendency was observed when tocopherol-stripped vegetable oils, with equimolar mixtures of tocopherols added, were treated under the same conditions. The reduction in tocopherols became greater with increasing levels of free fatty acids.