Copper-zirconium tungstate composites exhibiting low and negative thermal expansion influenced by reinforcement phase transformations

A fully-dense Cu-75 vol pct ZrW₂O₈ metal matrix composite was fabricated by hot isostatic pressing of Cu-coated ZrW₂O₈ particles. A small amount of the high-pressure γ-ZrW₂O₈ phase was created during the cooldown and depressurization following densification; near complete transformation to γ-ZrW₂O₈ was achieved by subsequent cold isostatic pressing. The thermal expansion behavior of the composite between 25°C and 325°C was altered by the cold isostatic pressing treatment, and also depended on the length of time that had passed between thermal cycles. The measured thermal expansion coefficients within specific temperature ranges varied from −6·10⁻⁶ K⁻¹ to far above the thermal expansion coefficient of the copper matrix. The complex temperature-dependent expansion/contraction behavior could be justified by considering the evolution of phase transformations taking place in the ZrW₂O₈ phase, which were observed by in-situ synchrotron X-ray diffraction measurements.     

S7-226PLC与MM440变频器在光缆护套机中的应用

本文介绍了由西门子S7—226PLC与MM440变频器组成的电气控制系统在光缆护套机速度控制中的应用。并对该系统的控制原理作了详细的阐述。     

Study of phase equilibria in the Al - Pd - Re system

Scanning and transmission electron microscopy have been combined with x-ray diffraction to examine the phase equilibria in the Al - Pd - Re system at 1000°C for compositions from 50 to 100 at.% Al, and the corresponding isothermal section has been constructed. The binary monoclinic Al₃ Re phase has been observed for the first time. It is confirmed that there is a stable icosahedral phase in this system. The boundaries to its homogeneity region have been determined and the phase equilibria in which it participates.     

Traveling-wave piezoelectric linear motor Part I: the stator design.

A new type of piezoelectric linear motor incorporating a traveling wave has been developed. The linear motor is comprised of a stator and a carriage. The stator design, which consists of a meander-line structure and gear teeth mounted on the meander-line structure, is the focus of this article. The meander-line structure is constructed with bimorph actuators arranged in a line. These actuators are driven by two phased sets of alternating current (ac) in order to generate a traveling wave. The traveling wave is transferred to the gear teeth, by which the carriage is driven. Modeling of the stator is derived by use of a strain energy method. The performance of various materials is evaluated by analytical and experimental methods. The analytical and the experimental results are quite approximate. Modal analysis is investigated using ANSYS. Appropriate modes associated with ultrasonic levels of resonant frequency are selected to obtain desired motion and to enhance the output performance. Surface speed for various applied input voltage are studied and indicate a nearly linear relationship. The stator in combination with the carriage makes up the linear motor.     

Fundamental aspects of excitation and propagation of on-line partial discharge signals in three-phase medium voltage cable systems

On-line partial discharge (PD) detection of three-phase belted medium voltage cable connections results in a number of interpretation differences as compared to off-line measurements where only one phase is energized. The induced currents and charges in the phase conductors and earth screen upon a PD not only depend on the discharge site, but also become phase angle dependent. Furthermore, simulations show that the PD distribution itself varies with the amount of eccentricity of the rotating electric field and may differ from the off-line distributions obtained with a linear field. Finally, the PD propagation in a multi-conductor cable also alters the signals measured at the cable terminals. In this paper, induced charges and PD distributions are studied by means of computer simulation. The cable propagation characteristics are verified by measurements.     

Perturbation analysis and control of two-class stochastic fluid models for communication networks

This paper uses stochastic fluid models (SFMs) for the control and optimization (rather than performance analysis) of communication network nodes processing two classes of traffic: one is uncontrolled and the other is subject to threshold-based buffer control. We derive gradient estimators for packet loss and workload related performance metrics with respect to threshold parameters. These estimators are shown to be unbiased and directly observable from a sample path without any knowledge of underlying stochastic characteristics of the traffic processes. This renders them computable in online environments and easily implementable for network management and control. We further demonstrate their use in buffer control problems where our SFM-based estimators are evaluated based on data from an actual system.     

Anaerobic biodecolorization of textile reactive anthraquinone and phthalocyanine dyebaths under hypersaline conditions.

The biological decolorization of two industrial, spent textile reactive dyebaths was investigated using a suspended-growth, halophilic mixed culture fed with glucose. Dyebath I contained mainly Reactive Blue 19 (RB19), an anthraquinone dye, whereas dyebath II contained mainly Reactive Blue 21 (RB21), a phthalocyanine dye. Batch assays under anaerobic conditions with the two neutralized dyebaths resulted in 87 and 37% extent of decolorization for dyebaths I and II, respectively. The rate of glucose utilization and the extent of acetate production were impacted in the presence of each dyebath as compared to the control culture. However, dyebath decolorization occurred despite moderate culture inhibition. Reuse of a biologically renovated RB19-containing dyebath in the dyeing process resulted in reproducible but not identical cotton fabric shades as compared to a standard dyeing (i.e., control) using fresh water. This difference is attributed to a variable degree of RB19 aggregation during the dyeing process and is not related to the efficiency of the biodecolorization process. Further improvement of the redyeing efficiency will lead to the development of an in-plant, closed-loop decolorization system resulting in significant water conservation and minimization of textile pollutants such as salt and dyes.     

Analysis of the possibility of implementing the principle of redistribution of concentration fields for reactive distillation processes

The evolution of the phase portrait for the dynamic system of open evaporation combined with a chemical reaction for a fixed liquid amount was studied as dependent on the rate constants of the reaction. A three-component azeotropic mixture whose vapor-liquid equilibrium diagram is characterized by two distillation regions was considered. The possibility of the open evaporation trajectory to transfer through the separatrix between the distillation regions was shown, as well as the possibility of implementing the principle of redistribution of the concentration fields due to chemical reactions occurring in reactive distillation columns.Translated from Teoreticheskie Osnovy Khimicheskoi Tekhnologii, Vol. 39, No. 2, 2005, pp. 115–119.Original Russian Text Copyright © 2005 by Solokhin, Nazanskii, Timofeev.     

Novel method for calculating maximum bulk electric field in high-voltage diodes with large negative bevel angles

The letter describes a simple method for calculating the maximum bulk electric field in high-voltage semiconductor diodes with large bevel angles. It is based on the notion of a characteristic length, which is defined in the letter. The resulting model is a useful design aid.     

Linearity stablized fiber-optic thermometer using pseudo-heterodyne phase detection

A temperature sensor using a fiber-optic Fabry-Perot interferometer is described. A pseudo-heterodyne detection scheme is adopted to read the light phase difference in the Fabry-Perot interference output. A higher harmonic components comparison method is used to stabilize the system and to increase detection linearity. This system realizes not only highly sensitive temperature sensing with good linearity and minimal adjusting error, but also application to the sensing of other physical quantities such as vibrations. Additionally, the signal-to-noise ratio and distortion of the detected signal are investigated as functions of fiber end reflectivity. These results will be useful in designing a high performance fiber-optic Fabry-Perot thermometer.