Feasibility of adding a personal communications network to anexisting fixed-service microwave system

This paper examines the feasibility of adding a personal communication network (PCN) to a frequency band which is already allocated to fixed-service microwave systems. To achieve this goal, spread spectrum techniques are used to spread narrowband PCN signals into wideband. The forward and reverse link performance of PCN users under the influence of the microwave system and the influence of PCN users on the microwave system are both examined. It is proven that spectrum sharing between the PCN network and microwave systems is indeed feasible. Although our analysis is done based upon the consideration of only one microwave system, it can be easily extended to allow the appearance of two or more microwave systems     

Multicluster,mobile, multimedia radio network

A multi-cluster, multi-hop packet radio network architecture for wireless adaptive mobile information systems is presented. The proposed network supports multimedia traffic and relies on both time division and code division access schemes. This radio network is not supported by a wired infrastructure as conventional cellular systems are. Thus, it can be instantly deployed in areas with no infrastructure at all. By using a distributed clustering algorithm, nodes are organized into clusters. The clusterheads act as local coordinators to resolve channel scheduling, perform power measurement/control, maintain time division frame synchronization, and enhance the spatial reuse of time slots and codes. Moreover, to guarantee bandwidth for real time traffic, the architecture supports virtual circuits and allocates bandwidth to circuits at call setup time. The network is scalable to large numbers of nodes, and can handle mobility. Simulation experiments evaluate the performance of the proposed scheme in static and mobile environments.This work was supported by the U.S. Department of Justice/Federal Bureau of Investigation, ARPA/CSTO under Contract J-FBI-93-112 Computer Aided Design of High Performance Wireless Networked Systems.     

High-speed Modulation of InGaAs: Sb-GaAs-GaAsP quantum-well vertical-cavity surface-emitting lasers with 1.27-/spl mu/m emission wavelength

1.27-/spl mu/m InGaAs: Sb-GaAs-GaAsP vertical-cavity surface-emitting lasers (VCSELs) were grown by metal-organic chemical vapor deposition and exhibited excellent performance and temperature stability. The threshold current changes from 1.8 to 1.1 mA and the slope efficiency falls less than /spl sim/35% as the temperature raised from room temperature to 70/spl deg/C. With a bias current of only 5 mA, the 3-dB modulation frequency response was measured to be 8.36 GHz, which is appropriate for 10-Gb/s operation. The maximal bandwidth is measured to be 10.7 GHz with modulation current efficiency factor (MCEF) of /spl sim/5.25 GHz/(mA)/sup 1/2/. These VCSELs also demonstrate high-speed modulation up to 10 Gb/s from 25/spl deg/C to 70/spl deg/C.     

Calculation of the stress intensity factor for arbitrary finite cracked body by using the boundary weight function method

The state of thermal stresses for a periodic two-layered elastic space weakened by an interface thermally insulated Griffith crack and loaded by concentrated line heat sources is investigated. The analysis is performed within the framework of the homogenized model with microlocal parameters. The stress intensity factors at the crack tips are determined. Two examples of the application of the results obtained are detailed.     

GaAs-GaAlAs heterostructure single-mode channel-waveguide cutoff modulator and modulator array

A GaAs single-mode channel-waveguide cutoff modulator that utilizes a GaAs-GaAlAs heterostructure and a linear array of such modulators are reported for the first time. We have measured a cutoff voltage as low as 9.0 V and an extinction ratio greater than 20 dB at an optical wavelength of 1.3 μm in a basic modulator that utilized a GaAs-Ga0.93Al0.07As heterostructure with a 0.9 μm thick GaAs epitaxial layer together with a ridge channel 2.5 mm in length and 5.0 μm in width. We have also succeeded in the realization of a high packing density (500 channels/cm) linear array of such cutoff modulators in the same GaAs substrate with equally satisfactory results. An RF bandwidth of 2.5 GHz has also been measured with the elementary modulator of such array. As in the case for LiNbO3substrates, the GaAs-based integrated optic modules that result from integration of such cutoff modulator arrays, microlens arrays, and planar acoustooptic or electrooptic Bragg diffraction grating arrays in a common substrate may be used to perform multiport switching, computing, and RF signal processing.     

A new process of fabricating inverted-staggered tri-layer thin-filmtransistors

A new method of fabricating a-Si:H TFT with etching-stop structure has been proposed. Only one plasma-enhanced chemical vapor deposition is required in this new method and a PH₃/H₂ plasma treatment during the deposition has been used to form the TFT contact and thus saved another plasma deposition. With this method, a TFT of 500 Å active layer has been fabricated successfully. The drain current and saturation mobility of this device is 2.4×10^-7 A and 0.1 cm²/V sec, respectively, which is comparable to the conventional fabricating method. The plasma treatment will also form an additional leakage path on the TFT top surface and increase the TFT subthreshold slope. However, a current of less than 1 pA at V_G=-2.4 V can still be obtained. The possible mechanism of the contact formation by the plasma treatment is also discussed     

Advances in software engineering

Software is the key technology in applications as diverse as accounting, hospital management, aviation, and nuclear power. Application advances in different domains such as these-each with different requirements-have propelled software development from small batch programs to large, real-time programs with multimedia capabilities. To cope, software's enabling technologies have undergone tremendous improvement in hardware, communications, operating systems, compilers, databases, programming languages, and user interfaces, among others. In turn, those improvements have fueled even more advanced applications. Improvements in VLSI technology and multimedia, for example, have resulted in faster, more compact computers that significantly widened the range of software applications. Database and user interface enhancements, on the other hand, have spawned more interactive and collaborative development environments. Such changes have a ripple effect on software development processes as well as on software techniques and tools. In this article, we highlight software development's crucial methods and techniques of the past 30 years     

Field theoretical treatment of H-plane waveguide junctionswith anisotropic medium

A method based on the equivalence principle and cavity field expansions is used to analyze an H-plane waveguide junction containing an anisotropic (ferrite or composite ferrite) post. Using the equivalence principle, magnetic surface currents are introduced at the imaginary boundaries chosen between the central region of the junction and the waveguides. The electric displacement in the junction can be completely expressed in terms of a solenoidal set. On the other hand, the magnetic induction in the junction must be expressed in terms of a solenoidal set and an irrotational set. Continuing the tangential magnetic field at the imaginary boundaries leads to a matrix equation, the unknowns of which are the amplitudes of the scattered waveguide modes. Using this method, H-plane waveguide junctions with ferrite and composite ferrite posts are considered. The numerical results show excellent agreement with previously published experimental and theoretical results     

Service-oriented smart home applications: composition, code generation, deployment, and execution

A smart home usually has a variety of devices or home appliance, instead of designing software for a specific home, this paper proposes a service-oriented framework with a set of ontology systems to support service and device publishing, discovery of devices and their services, composition of control software using existing control services that wrap devices, deployment, and execution of the composed service in an computing environment, monitoring the execution, and recovery from device failure. The ontology systems specify semantic information about devices, services, and workflows used in various smart home, and users can compose and recompose services for their specific needs. New devices, workflows, and services can be added into ontology. Most of the steps in this process can be automated including code generation. For example, service composition will be carried out in three steps: abstract workflow design, function construction, and device discovery, and different codes can be generated for different computing platforms such as Java and Open Services Gateway initiative environments. In this way, a variety of smart home can be constructed rapidly using the framework by discovery and composition using existing services and workflows. This paper illustrates this framework using a media control example to illustrate the ontology, discovery, composition, deployment, execution, monitoring, and recovery.