Observation of a half-quantum-flux periodicity pattern in an rf SQUID with small critical currents

We have found experimentally that rf SQUID's working in a nonhysteretic mode with small critical currents give exactly at resonance and at very low rf bias a triangular pattern with a period equal to half of one elementary quantum of magnetic flux. We discuss a possible explanation of this peculiar result.     

Microplane Model M5 with Kinematic and Static Constraints for Concrete Fracture and Anelasticity. I: Theory

Presented is a new microplane model for concrete, labeled M5, which improves the representation of tensile cohesive fracture by eliminating spurious excessive lateral strains and stress locking for far postpeak tensile strains. To achieve improvement, a kinematically constrained microplane system simulating hardening nonlinear behavior (nearly identical to previous Model M4 stripped of tensile softening) is coupled in series with a statically constrained microplane system simulating solely the cohesive tensile fracture. This coupling is made possible by developing a new iterative algorithm and by proving the conditions of its convergence. The special aspect of this algorithm (contrasting with the classical return mapping algorithm for hardening plasticity) is that the cohesive softening stiffness matrix (which is not positive definite) is used as the predictor and the hardening stiffness matrix as the corrector. The softening cohesive stiffness for fracturing is related to the fracture energy of concrete and the effective crack spacing. The postpeak softening slopes on the microplanes can be adjusted according to the element size in the sense of the crack band model. Finally, an incremental thermodynamic potential for the coupling of statically and kinematically constrained microplane systems is formulated. The data fitting and experimental calibration for tensile strain softening are relegated to a subsequent paper in this issue, while all the nonlinear triaxial response in compression remains the same as for Model M4.     

Lithium Intercalation Compound Dramatically Influences the Electrochemical Properties of Exfoliated MoS2

MoS₂ and other transition metal dichalcogenides (TMDs) have recently gained a renewed interest due to the interesting electronic, catalytic, and mechanical properties which they possess when down‐sized to single or few layer sheets. Exfoliation of the bulk multilayer structure can be achieved by a preliminary chemical Li intercalation followed by the exfoliation due to the reaction of Li with water. Organolithium compounds are generally adopted for the Li intercalation with n‐butyllithium (n‐Bu‐Li) being the most common. Here, the use of three different organolithium compounds are investigated and compared, i.e., methyllithium (Me‐Li), n‐butyllithium (n‐Bu‐Li) and tert‐butyllithium (t‐Bu‐Li), used for the exfoliation of bulk MoS₂. Scanning transmission electron microscopy (STEM), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV) are adopted for a comprehensive characterization of all materials under investigation. In addition, catalytic properties towards the hydrogen evolution reaction (HER) and capacitive properties are also tested. Different organolithium compounds exhibit different extent of Li intercalation resulting in different degrees of exfoliation. The inherent electrochemical behavior of MoS₂ consisting of significant anodic and cathodic peaks as well as its capacitive behavior and catalytic properties towards hydrogen evolution reaction are strongly connected to the exfoliation compound used. This research significantly contributes to the development of large‐scale synthesis of electrocatalytic MoS₂‐based materials.     

Schrifttumsberichte

Ohne Zusammenfassung     

Automated resolution of connector architectures using constraint solving (ARCAS method)

In current software systems, connectors play an important role by encapsulating the communication and coordination logic. Since they share common patterns (elements) depending on characteristics of the connections, the elements can be predefined and reused. A method of connector implementation based on a composition of predefined elements naturally comprises two steps: resolution of the connector architecture, and creation of the actual connector code based on the architecture. However, manual resolution of a connector architecture is very difficult due to the number of factors to be considered. Thus, the challenge is to come up with an automated method, able to address all the important factors. In this paper, we present a method for automated resolution of connector architectures based on constraint solving techniques. We exploit a propositional logic with relational calculus for defining a connector theory, a constraint specification reflecting both the predefined parts and the important resolution factors, and employ a constraint solver to find a suitable connector architecture as a model of the theory. As a proof of the concept, we show how the theory can be captured in the Alloy language and resolved via the Alloy Analyzer.     

Corrosion of NiTi Wires with Cracked Oxide Layer

Corrosion behavior of superelastic NiTi shape memory alloy wires with cracked TiO₂ surface oxide layers was investigated by electrochemical corrosion tests (Electrochemical Impedance Spectroscopy, Open Circuit Potential, and Potentiodynamic Polarization) on wires bent into U-shapes of various bending radii. Cracks within the oxide on the surface of the bent wires were observed by FIB–SEM and TEM methods. The density and width of the surface oxide cracks dramatically increase with decreasing bending radius. The results of electrochemical experiments consistently show that corrosion properties of NiTi wires with cracked oxide layers (static load keeps the cracks opened) are inferior compared to the corrosion properties of the straight NiTi wires covered by virgin uncracked oxides. Out of the three methods employed, the Electrochemical Impedance Spectroscopy seems to be the most appropriate test for the electrochemical characterization of the cracked oxide layers, since the impedance curves (Nyquist plot) of differently bent NiTi wires can be associated with increasing state of the surface cracking and since the NiTi wires are exposed to similar conditions as the surfaces of NiTi implants in human body. On the other hand, the potentiodynamic polarization test accelerates the corrosion processes and provides clear evidence that the corrosion resistance of bent superelastic NiTi wires degrades with oxide cracking.     

Synthesis,crystal growth,thermal studies and scaled quantum chemical studies of structural and vibrational spectra of the highly efficient organic NLO crystal: 1-(4-Aminophenyl)-3-(3,4-dimethoxyphenyl)-prop-2-en-1-one

A new chalcone derivative, 1-(4-aminophenyl)-3-(3,4-dimethoxyphenyl)-prop-2-en-1-one (DMAC) was synthesized and single crystals were grown by slow evaporation technique. The FT-Raman and FT-IR spectra of the sample were recorded in the region 3700–100 cm⁻¹ and 4000–400 cm⁻¹, respectively. The spectra were interpreted with the aid of normal coordinate analysis following structure optimizations and force field calculations based on density functional theory (DFT) at the B3LYP/6-311+G(d,p) level of theory. Normal coordinate calculations were performed using the DFT force field, corrected by a recommended set of scaling factors, yielding fairly good agreement between the observed and calculated wavenumbers. DMAC is thermally stable up to 220.0 °C and optically transparent in the visible region. Information about the size, shape, charge density distribution and site of chemical reactivity of the molecule has been obtained by mapping electron density isosurface with electrostatic potential surfaces (ESP). The SHG efficiency of DMAC is observed to be 10 times that of standard urea crystal of identical particle size.     

Determining adulteration of canned products using SNIF-NMR and IRMS: detection of undeclared addition of synthetic acetic acid

Possible adulteration of canned products containing spirit vinegar pickle by adding synthetic acetic acid is a significant problem of the food industry. Isotope analyses, which determine botanical origin of acetic acid and also can detect synthetic acid, were applied to detect undeclared addition of synthetic acetic acid to canned products. The aim of the study was to improve the extraction technique for the SNIF-NMR (²H/¹H; site-specific natural isotopic fractionation-nuclear magnetic resonance) and IRMS (¹³C/¹²C; isotope ratio mass spectrometry) isotope methods and for an atypical matrix and to determine isotope ratios in canned vegetables pickle to prove their adulteration or authenticity. The following set of canned products was analysed: pickled cucumbers (n = 16) and one vinegar pickle purchased in the Czech market and six model (cucumber) pickles. The determined ratios of ²H/¹H and ¹³C/¹²C for the pickled cucumbers proved to be authentic ranged from 89.4 to 107.0 ppm and from ?28.7 to ?15.6 ‰, respectively; for the synthetic acetic acids diluted with water they ranged from 114.2 to 129.0 ppm and from ?44.9 to ?33.4 ‰, respectively. Isotope analyses were confirmed as a reliable tool for assessing authenticity of canned products. The method enables detection of synthetic acetic acid addition into vinegars and canned vegetables containing vinegar pickle up from 20 % (of total acidity).     

Experimental Investigation of the Properties of Lime-Based Plaster-Containing PCM for Enhancing the Heat-Storage Capacity of Building Envelopes

Experimental analysis of a wide range of properties of a lightweight plaster which should enhance the heat-storage capacity of building envelopes is presented. The basic physical characteristics, namely, the bulk density, matrix density, total open porosity, and pore-size distribution are measured at first. Then, the compressive strength is determined for an assessment of mechanical performance of the plaster. The thermal conductivity and thermal diffusivity are studied using an impulse technique. Differential scanning calorimetry measurements are performed as well, in order to identify the temperature range and latent heat of the phase change and to determine the specific heat capacity as a function of temperature. Durability properties are assessed using the measurement of the water absorption coefficient and sorption and desorption isotherms. The experimental results indicate a good capability of the designed plaster to moderate effectively the interior climate of buildings.