Fatigue performance of hybrid overlap friction stir welding and adhesive bonding of an Al‐Mg‐Cu alloy

The need for weight reduction and leaner manufacturing and assembly processes in aircraft construction has led to the pursuit of welding technologies. One such technology that has been considered for this application is friction stir welding (FSW). Since it is a solid‐state joining method, it creates high performing joints in a wide range of materials while avoiding overlap lengths and added weight from fasteners, crack stoppers, doublers, etc. However, the adoption of this technology to the assembly of large fuselage shell components is challenging, due to geometric tolerance management requirements. In this paper, a hybrid joining method is proposed for such application, involving FSW and adhesive bonding. Fatigue performance of single lap joints of AA2024‐T3 Al‐Mg‐Cu alloy was assessed and benchmarked against FSW overlap and adhesive bonded joints. Significant strength and ductility increase was achieved through the hybridization of the overlap FSW joints. Fatigue strength of the hybrid joints was also higher than FSW overlap joints, although not as high as adhesive bonded joints.     

Breathable Lignin Nanoparticles as Reversible Gas Swellable Nanoreactors

The design of stimuli-responsive lignin nanoparticles (LNPs) for advanced applications has hitherto been limited to the preparation of lignin-grafted polymers in which usually the lignin content is low (<25 wt.%) and its role is debatable. Here, the preparation of O₂-responsive LNPs exceeding 75 wt.% in lignin content is shown. Softwood Kraft lignin (SKL) is coprecipitated with a modified SKL fluorinated oleic acid ester (SKL-OlF) to form colloidal stable hybrid LNPs (hy-LNPs). The hy-LNPs with a SKL-OlF content ranging from 10 to 50 wt.% demonstrated a reversible swelling behavior upon O₂/N₂ bubbling, increasing their size – ≈35% by volume – and changing their morphology from spherical to core-shell. Exposition of hy-LNPs to O₂ bubbling promotes a polarity change on lignin-fluorinated oleic chains, and consequently their migration from the inner part to the surface of the particle, which not only increases the particle size but also endows hy-LNPs with enhanced stability under harsh conditions (pH < 2.5) by the hydration barrier effect. Furthermore, it is also demonstrated that these new stimuli-responsive particles as gas tunable nanoreactors for the synthesis of gold nanoparticles. Combining a straightforward preparation with their enhanced stability and responsiveness to O₂ gas these new LNPs pave the way for the next generation of smart lignin-based nanomaterials.     

Species composition and plant traits: Characterization of the biogeomorphological succession within contrasting river corridors

Plant communities and dynamics can be characterized according to species composition or plant traits. Here, we used species composition and plant traits to compare their effectiveness in discriminating the biogeomorphological (involving reciprocal feedbacks between physical and biological processes) and ecological (mainly biologically driven) phases of the fluvial biogeomorphological succession (FBS) model. The comparison was done between two French rivers, the largely unchannelized lower Allier and the channelized middle Garonne. One reach representative of each river section was selected for the study. Within each river reach, we chose two contrasted study sites in terms of channel and floodplain dynamics: a reference site (least altered channel and floodplain dynamics) and an altered site (laterally stabilized by riprap and constrained). In the four study sites, we sampled vegetation in 402 plots of 4 m². The 512 species identified in the plots were characterized in terms of plant traits (20) from a literature review. When comparing reaches in unconstrained ordinations and permutational multivariate analyses of variance, both species composition and plant traits led to a similar identification of the biogeomorphological and the ecological successional trajectories. Nevertheless, the trait approach was less influenced by local and regional bioclimatic, hydrogeomorphological, and anthropogenic settings and thus produced a more comprehensive and general classification of the biogeomorphological and ecological phases of the FBS model. A lower than expected contrast between the four sites was found, because neither species composition nor plant traits could entirely characterize distinct successional trajectories occurring in our reference or altered sites. Furthermore, our results contributed to a better understanding of the multiple successional trajectories that can occur in midlatitude river corridors. It also showed that relating plant traits to their effects on fluvial landform dynamics remains a core challenge in explaining succession including feedback mechanisms between hydrology, morphodynamics, and vegetation dynamics.     

Structural modification of the hamster sperm acrosome during posttesticular development in the epididymis

The acrosome of the mature spermatozoon functions as a regulated secretory vesicle which performs several critical functions in mammalian fertilization. Acrosome assembly occurs throughout spermiogenesis and continues during posttesticular sperm maturation in the epididymis, resulting in a structurally polarized membrane-bounded organelle that contains an assortment of hydrolases and a stable infrastructure termed the acrosomal matrix. The role of stable acrosomal matrix assemblies in acrosomal biogenesis and function are poorly understood. This article presents ultrastructural, immunocytochemical, and biochemical data on the remodeling of the hamster acrosomal matrix during spermiogenesis and posttesticular sperm maturation in the epididymis. Specific posttranslational modifications of the major acrosomal matrix protein are evident in late, step 16, spermatids and matrix protein processing continues within specific acrosomal subdomains of caput epididymal spermatozoa. At the completion of sperm maturation, the acrosomal matrix consists of two structurally distinct domains which are adherent to the outer acrosomal membrane and exhibit a localized distribution pattern. Coincident with acrosomal matrix differentiation, a paracrystalline cytoskeletal complex is assembled onto the outer acrosomal membrane of epididymal spermatozoa. This cytoskeletal network appears to establish transmembrane structural interactions with the acrosomal matrix and may maintain attachment of the acrosomal cap to the sperm head during the early steps of the acrosome reaction.     

Influence of composition on the unipolar electric fatigue of Ba(Zr0.2Ti0.8)O3‐(Ba0.7Ca0.3)TiO3 lead‐free piezoceramics

The lead‐free (1?x)Ba(Zr_0.2Ti_0.8)O₃‐x(Ba_0.7Ca_0.3)TiO₃ system is considered as promising candidate for the replacement of lead‐based piezoceramics in actuation applications, during which electric fatigue is a major concern. This issue was addressed in this work, where the unipolar fatigue resistance of three (1?x)Ba(Zr_0.2Ti_0.8)O₃‐x(Ba_0.7Ca_0.3)TiO₃ compositions with different crystallographic structures (rhombohedral, orthorhombic, and tetragonal) was evaluated. Strain asymmetry and development of an internal bias field were observed in all compositions. The decrease in the remanent polarization and the large signal piezoelectric coefficient after 10⁷ unipolar cycles was found to lie between 6%‐12% and 2%‐13%, respectively. The most pronounced fatigue was observed for the orthorhombic composition, which has the largest extrinsic contribution to strain. On the other hand, the best fatigue resistance was observed for the tetragonal composition, which has a predominantly intrinsic strain response. The correlation of fatigue resistance with strain mechanism was corroborated with determination of the Rayleigh parameters and changes in the domain morphology after cycling as confirmed by piezoresponse force microscopy.     

Surface-initiated growth of copper using isonicotinic acid-functionalized aluminum oxide surfaces

Isonicotinate self-assembled monolayers (SAM) were prepared on alumina surfaces (A) using isonicotinic acid (iNA). These functionalized layers (iNA-A) were used for the seeded growth of copper films (Cu-iNA-A) by hydrazine hydrate-initiated electroless deposition. The films were characterized by scanning electron microscopy (SEM), electron-dispersive X-ray spectroscopy, atomic force microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and advancing contact angle measurements. The films are Cu⁰ but with surface oxidation, and show a faceted morphology, which is more textured (R _q = 460 ± 90 nm) compared to the SAM (R _q = 2.8 ± 0.5 nm). In contrast, growth of copper films by SnCl₂/PdCl₂ catalyzed electroless deposition, using formaldehyde (CH₂O) as the reducing agent, shows a nodular morphology on top of a relatively smooth surface. No copper films are observed in the absence of the isonicotinate SAM. The binding of Cu²⁺ to the iNA is proposed to facilitate reduction to Cu⁰ and create the seed for subsequent growth. The films show good adhesion to the functionalized surface.     

Performance characteristics of the anaerobic baffled reactor

An anaerobic sludge blanket process, termed the anaerobic baffled reactor (ABR), has been developed and shows promise for industrial wastewater treatment. It combines the advantages of high stability and reliability with a high void volume. The risk of clogging and sludge bed expansion with resulting high microbial losses is reduced and there is no need for special gas collection or biological solids separation systems. Organic loadings as high as 36 g COD l^?1day^?1 have been achieved with COD removal rates of more than 24 g COD l^?1 day^?1 and methane production rates exceeding 6 volumes per day per unit volume of reactor. The hypothesis, that the ABR may be adequately modeled as a fixed-film reactor, has been supported. Therefore, a unified approach, based on fundamentals of bacterial kinetics and mass transport, appears useful for modeling this and similar systems. Pilot plant studies are necessary to determine the scaling factors of the system as well as the overall efficiency and costs.     

Perfusion in microfluidic cross-flow: separation of white blood cells from whole blood and exchange of medium in a continuous flow

We describe a microfluidic technique for separation of particles and cells and a device that employs this technique to separate white blood cells (WBC) from whole human blood. The separation is performed in cross-flow in an array of microchannels with a deep main channel and large number of orthogonal, shallow side channels. As a suspension of particles advances through the main channel, a perfusion flow through the side channels gradually exchanges the medium of the suspension and washes away particles that are sufficiently small to enter the shallow side channels. The microfluidic device is tested with a suspension of polystyrene beads and is shown to efficaciously exchange the carrier medium while retaining all beads. In tests with whole human blood, the device is shown to reduce the content of red blood cells (RBC) by a factor of approximately 4000 with retention of 98% of WBCs. The ratio between WBCs and RBCs reached at an outlet of the device is 2.4 on average. The device is made of a single cast of poly(dimethylsiloxane) sealed with a cover glass and is simple to fabricate. The proposed technique of separation by perfusion in continuous cross-flow could be used to enrich rare populations of cells based on differences in size, shape, and deformability.     

Selective and quantitative detection of influenza virus proteins in commercial vaccines using two-dimensional high-performance liquid chromatography and fluorescence detection

In this work, we report on the applicability of two-dimensional high-performance liquid chromatography (2D-HPLC) for the comprehensive characterization of inactivated influenza vaccine proteins. This novel procedure features minimal sample treatment and combines the on-line coupling of size exclusion HPLC to reversed-phase HPLC. A comparative analysis of commercial vaccines from three different manufacturers showed the method to be highly selective by providing characteristic reproducible chromatographic profiles for each vaccine. In addition, the method provided enhanced sensitivity for most constituents as a result of the use of native fluorescence detection in the reversed-phase HPLC step. The limits of detection (at a signal-to-noise ratio of >3) for hemagglutinin (HA) antigens were 105 and 172 ng/mL for influenza A/New Caledonia/20/99 and B/Jiangsu/10/2003 strains, respectively. The potential of this 2D-HPLC procedure in terms of quantitative antigen analysis was assessed by determination of the HA content of commercial vaccines. Results provided very good correlation with nominal HA values. The reproducibility (RSD) of the whole procedure was also evaluated and was found to be better than 2 and 3% for calculated antigen concentrations expressed as micrograms of HA per milliliter in commercial vaccines for samples of the same lot (n = 5) or different lots (n = 3), respectively. In addition, it allowed the selective detection of several influenza constituents including nucleoproteins from type A and B viruses and the highly hydrophobic matrix protein 1 from both virus strains.     

Rheological behavior of anionic collagen injectable gels in the presence of rhamsan for plastic surgery applications

The present paper describes the rheological properties of anionic collagen gels and anionic collagen:rhamsan composites gels in the concentration of 0.7, 4 and 6%, estimated to be used as injectable biomaterials for plastic reconstruction. Rheological studies of these gels showed that independently of pH, composition and concentration the viscoelastic behavior was dependent on the frequency, with the storage modulus always greater than the loss modulus (G′ > G″ and δ < 45°). Creep experiments showed that anionic collagen:rhamsan composites equilibrated at pH 7.4 were less elastic and more susceptible to deformation in comparison to gels equilibrated at pH 3.5. Flow experiments indicated that the force needed for the extrusion of anionic collagen:rhamsan composites, in comparison to anionic collagen, was significantly smaller and with a smoother flow, suggesting the association with rhamsan may be a good alternative in the replacement of glutaraldehyde to stabilize the microfibril assembly of commercial collagen gel preparations. Finally, on the basis of dynamic viscosity profiles found for different preparations, some of these composites are potential candidates to be utilized in laryngology.