Application of economical models for dye removal from aqueous solutions: cash flow,cost–benefit,and alternative selection methods

Although there are numerous adsorption studies performed by using various adsorbents, there is no deterministic knowledge about selection of appropriate adsorbent type from present alternatives. In order to evaluate the advantages of the selected adsorbent species mathematically, researchers may use economical models such as cash flow diagrams, cost–benefit analyses, and alternative selection methods. In spite of the fact that these models have been used in many other engineering branches they are rarely applied in environmental research. In this study we have aimed to investigate usability of the mentioned economical models in adsorption of reactive azo dyes from aqueous solutions. Activated ash, a waste material, and commercial granular activated carbon were decided to be adsorbent alternatives. By applying economical models appropriate adsorbent type was selected considering both adsorption efficiencies and economical conditions. Although similar tendencies were monitored in cash flow diagrams; considering the amount of expenses activated ash exhibited remarkable advantages compared to granular activated carbon. Furthermore, results of cost–benefit analyses showed that activated ash has been advantageous when total costs and profits were evaluated together. Results of this study suggest usage of these economical models even in adsorption studies in order to provide accurate information on the selection of appropriate adsorbent type. These methods enable evaluation of economical conditions, which is generally neglected, together with the obtained removal efficiencies.     

European research policy and bibliometric indicators, 1990�C2005

This paper describes and analyses the role played in the development of bibliometric indicators??and the use made of bibliometric indicators for policy purposes??by the European Commission??s Directorate-General Research in the period 1990?C2005.     

Transient weakness and compound muscle action potential decrement in myotonia congenita

Twenty-five Turkish patients with recessive myotonia congenita (RMC), 16 of whom had genetic confirmation, were studied. Nineteen had transient weakness. In the upper extremities, onset age of transient weakness was usually in the early teens. All untreated RMC patients had a compound muscle action potential decrement of > or =25%, usually above 50%, with repetitive nerve stimulation at 10/s for 5 s. Patients with other nondystrophic diseases with myotonia, except 1 patient with dominant myotonia congenita, had no transient weakness and a CMAP decrement below 25%.     

Freeze-Drying of Pharmaceutical Products: Research and Development Needs

Significance of pharmaceutical formulation (choosing of correct excipients in optimal quantities), effects of glass transition temperature, importance of theoretical modeling of the process, benefits of optimal control, and the advantages of remote monitoring of the process are presented. Experimental and theoretical research and development needs for the freeze-drying of pharmaceutical products are proposed and discussed.     

Strength and elastic properties of structural lightweight concretes

The study presents the influence of characteristics of four aggregate types (two sintered lightweight fly ash aggregates, cold-bonded lightweight fly ash aggregate and normalweight crushed limestone aggregate) on the strength and elastic properties of concrete mixtures. Different models were also used in order to predict the strength and modulus of elasticity values of concretes. The results of this study revealed the achievement of manufacturing high-strength air-entrained lightweight aggregate concretes using sintered and cold-bonded fly ash aggregates. In order to reach target slump and air content, less amount of chemical admixtures was used in lightweight concretes than in normal-weight concrete, leading to reduction in production cost. The use of lightweight aggregates (LWA) instead of normalweight aggregates in concrete production slightly decreased the strength. The models given by codes, standards and software and equation derived in this study gave close estimated values to the experimental results.     

An investigation into the mechanical and tribological properties of plasma electrolytic oxidation and hard-anodized coatings on 6082 aluminum alloy

A ceramic coating on AA6082 aluminum alloy prepared by plasma electrolytic oxidation (PEO) has been studied and compared against a sulphuric acid hard-anodized coating on the same alloy. Surface morphology and microstructures of the coatings have been examined by scanning electron microscopy. X-ray diffraction is used to determine the phase composition of the coatings. The adhesion strength of the coatings has been evaluated using a scratch test method. The coating's mechanical properties such elastic modulus and hardness data have been generated using a dynamic ultra-microhardness tester. Sliding wear tests with different loading rates are performed on the coatings in order to assess their wear resistance. Test results show that the PEO treated samples exhibit significantly better mechanical properties compared to hard anodized samples. The elastic modulus and hardness of the PEO coating are 2-3 times greater than of the hard anodized coating and subsequently, an improved wear resistance of the PEO coating has been achieved. The mechanical properties of the coatings and their relations to their tribological performance are discussed.     

Effect of electroless etching parameters on the growth and reflection properties of silicon nanowires

Vertically aligned silicon nanowire (Si NW) arrays have been fabricated over large areas using an electroless etching (EE) method, which involves etching of silicon wafers in a silver nitrate and hydrofluoric acid based solution. A detailed parametric study determining the relationship between nanowire morphology and time, temperature, solution concentration and starting wafer characteristics (doping type, resistivity, crystallographic orientation) is presented. The as-fabricated Si NW arrays were analyzed by field emission scanning electron microscope (FE-SEM) and a linear dependency of nanowire length to both temperature and time was obtained and the change in the growth rate of Si NWs at increased etching durations was shown. Furthermore, the effects of EE parameters on the optical reflectivity of the Si NWs were investigated in this study. Reflectivity measurements show that the 42.8% reflectivity of the starting silicon wafer drops to 1.3%, recorded for 10 μm long Si NW arrays. The remarkable decrease in optical reflectivity indicates that Si NWs have a great potential to be utilized in radial or coaxial p-n heterojunction solar cells that could provide orthogonal photon absorption and enhanced carrier collection.     

Cusp mirror—Heat pipe evacuated tubular solar thermal collector

A solar thermal collector was constructed based on an internal 1.15X cusp concentrator, thermal insulation involving a vacuum and selective absorber, and thermal transfer to a manifold via heat-pipe action. Performance of the collector was compared with that of an evacuated, selectively coated, flat-plate absorber equipped with flow-through heat transfer. It was shown that with single collector tubes, mirror losses lowered the optical efficiency of the cusp, heat-pipe collector below that of the flat plate, while the smaller absorber area of the heat pipe reduced thermal losses at absorber temperatures above ambient. Thus, a crossover in efficiency occurred such that the flat plate was more efficient at low while the cusp-heat pipe was more efficient at high . Testing of modules showed that manifold losses and gains could dominate these collector effects when the collector area approximately equaled the manifold area.     

Normal liver, spleen, and kidney dimensions in neonates, infants, and children: evaluation with sonography

OBJECTIVE: The objective of this study was to determine the normal range of dimensions for the liver, spleen, and kidney in healthy neonates, infants, and children. SUBJECTS AND METHODS: This prospective study involved 307 pediatric subjects (169 girls and 138 boys) with normal physical or sonographic findings who were examined because of problems unrelated to the measured organs. The subjects were 5 days to 16 years old. All measured organs were sonographically normal. At least two dimensions were obtained for each liver, spleen, and kidney. Relationships of the dimensions of these organs with sex, age, body weight, height, and body surface area were investigated. Suggested limits of normal dimensions were defined. RESULTS: Dimensions of the measured organs were not statistically different in boys and girls. Longitudinal dimensions of all three organs showed the best correlation with age, body weight, height, and body surface area. Height showed the strongest correlation of all. This correlation was a polynomial correlation. CONCLUSION: Determination of pathologic changes in size of the liver, spleen, and kidney necessitates knowing the normal range of dimensions for these organs in healthy neonates, infants, and children. Presented data are applicable in daily routine sonography. Body height should be considered the best criteria to correlate with longitudinal dimensions of these organs.