Degradation of Nextel™ 610‐based oxide‐oxide ceramic composites by aluminum oxychloride decomposition products

Nextel? 610 alumina fibers and alumina‐YAG (yttrium‐aluminum garnet) matrices were used to make oxide‐oxide ceramic matrix composites (CMCs) with and without monazite (LaPO₄) fiber‐matrix interfaces. Twelve sequential aluminum oxychloride (AlOCl) infiltrations with 1 hour heat treatments at 1100°C and a final 1 hour heat treatment at 1200°C were used for matrix densification. This matrix processing sequence severely degraded CMC mechanical properties. CMC tensile strengths and interlaminar tensile (ILT) strengths were less than 10 MPa and 1 MPa, respectively. Axial fracture of Nextel? 610 fibers was observed after ILT testing, highlighting the extreme degradation of fiber strength. Extensive characterization was done to attempt to determine the responsible degradation mechanisms. Changes in Nextel? 610 fiber microstructure after CMC processing were characterized by optical microscopy, SEM, and extensively by TEM. In AlOCl degraded fibers, grain boundaries near the fiber surface were wetted with a glass that contained Y₂O₃/SiO₂ or Y₂O₃/La₂O₃/P₂O₅/SiO₂, and near‐surface pores were partially filled with Al₂O₃. This glass must also contain some Al₂O₃ and initially some chlorine. AlOCl decomposition products were predicted using the FactSage^® Thermochemical code, and were characterized by mass spectrometry. Effects of AlOCl precursors on monazite coated and uncoated Nextel? 610 fibers tow and filament strength were evaluated. A mechanism for the severe degradation of the oxide‐oxide CMCs and Nextel? 610 fibers that involves subcritical crack growth promoted by release of chlorine containing species during breakdown of intergranular glasses in an anhydrous environment is proposed.     

Fiber Strength After Grain Growth in Nextel™ 610 Alumina Fiber

Nextel^? 610 alumina fiber tows were heat‐treated at 1100°C–1500°C for 1 to 100 h in air. Tensile strengths and Weibull moduli were measured for 30 filaments after each heat‐treatment. 3‐D grain size and orientation distributions were described using oblate ellipsoids. The number of grains in a 1 inch gauge length and grains with the largest major and minor ellipsoid‐axes were determined from these distributions. The grain with the largest K_EFF for mixed‐mode fracture was also determined, using the maximum energy release rate criteria from grain‐size and orientation distributions. Grain‐size dependence of tensile strength and Weibull modulus was evaluated. Strength had no obvious dependence on grain size for fibers with average major‐axes smaller than 0.25 μm. For fibers with larger grains, grain‐size dependence may involve flaws originating from clumps of grains, rather than a single grain. Possible relationships between strength and grain‐size and other causes of strength degradation after heat‐treatment are discussed.     

Determination of 3‐D Alumina Grain Orientation,Size, Shape,and Growth Kinetics from 2‐D Data in Nextel™ 610 Fibers

Nextel^? 610 alumina fibers were heat‐treated at 1100°C–1500°C for 1–100 h in air. Grain size distributions (GSDs) and grain orientation distributions (ODs) with respect to the fiber axis were characterized by analysis of TEM images from longitudinal fiber sections. The 2‐D GSDs and ODs were characterized as ellipses. 3‐D GSDs and ODs were calculated by fitting distributions of oriented oblate ellipsoids to 2‐D GSDs and ODs formed by ellipsoid–section‐plane intersections. The standard deviations (SDs) of log‐normal GSDs consistently increased with grain size, which is not diagnostic of normal grain growth. The grain aspect ratio (α) and the tendency of the short grain axis to orient perpendicular to the fiber axis also increased with grain size, resulting in more textured fibers at larger grain sizes. Average 3‐D grain sizes were larger than 2‐D sizes for GSDs with small SDs, but smaller for GSDs with large SDs because of under sampling of small grains. 3‐D grain growth kinetics had the same 815 kJ/mol activation energy as that found by 2‐D analysis, but the grain growth exponent m of 6.0 was larger and the pre‐exponential factor much smaller. Expressions for 3‐D log‐normal GSDs as a function of heat treatment temperature and time were determined. α‐distributions and ODs were determined as a function of grain size. Methods for determining 3‐D GSDs are discussed.     

Similarity between class A and class B G-protein-coupled receptors exemplified through calcitonin gene-related peptide receptor modelling and mutagenesis studies

Modelling class B G-protein-coupled receptors (GPCRs) using class A GPCR structural templates is difficult due to lack of homology. The plant GPCR, GCR1, has homology to both class A and class B GPCRs. We have used this to generate a class A–class B alignment, and by incorporating maximum lagged correlation of entropy and hydrophobicity into a consensus score, we have been able to align receptor transmembrane regions. We have applied this analysis to generate active and inactive homology models of the class B calcitonin gene-related peptide (CGRP) receptor, and have supported it with site-directed mutagenesis data using 122 CGRP receptor residues and 144 published mutagenesis results on other class B GPCRs. The variation of sequence variability with structure, the analysis of polarity violations, the alignment of group-conserved residues and the mutagenesis results at 27 key positions were particularly informative in distinguishing between the proposed and plausible alternative alignments. Furthermore, we have been able to associate the key molecular features of the class B GPCR signalling machinery with their class A counterparts for the first time. These include the [K/R]KLH motif in intracellular loop 1, [I/L]xxxL and KxxK at the intracellular end of TM5 and TM6, the NPXXY/VAVLY motif on TM7 and small group-conserved residues in TM1, TM2, TM3 and TM7. The equivalent of the class A DRY motif is proposed to involve Arg^2.39, His^2.43 and Glu^3.46, which makes a polar lock with T^6.37. These alignments and models provide useful tools for understanding class B GPCR function.     

Optimization of a planar tendon-driven parallel manipulator for a maximal dextrous workspace

In this article, new methodologies for determining the tension distribution and optimal configurations of planar tendon-driven parallel manipulators (TDPMs) are presented. TDPMs are characterized by the use of cables in place of the linear actuators used in most parallel manipulators. Three separate, but inter-related topics are examined in this article, and methodologies for addressing them are proposed. The first is the determination of cable forces for overconstrained tendon-driven manipulators, which is necessary in order to address the second topic, namely, the development of a methodology for workspace determination of tendon-driven manipulators. The final topic examined is the dimensional synthesis of tendon-driven manipulators for a large dextrous workspace. The numerical methodologies developed here have potential for easy application to more complex spatial cases.     

Interaction between carbon dioxide and ionic liquids: Novel electrolyte candidates for safer Li-ion batteries

Ionic liquids (ILs) are typically molten salts at temperatures lower than 100 °C. Because of their thermal and electrochemical properties, they are good candidates to replace the state-of-the-art electrolytes used in today's Li-ion batteries. These commercial batteries often suffer from hazards caused by possible misuse. Elevated voltages and high temperatures usually lead to electrolyte degradation due to parasitic reactions with the electrodes leading to gas (mainly CO₂) evolution and may then eventually catch fire. Also, ILs are able to dissolve various gas molecules, making it possible to prevent a built-up of an overpressure inside the battery in case of undesired gas evolution. In this work, CO₂ storage in two different ionic liquids, i.e. PYR₁₄TFSI and [BMIm][BF4] is studied with regard to their respective Li-salt. Mixtures of ILs plus different concentrations of CO₂ were made. Phase diagrams of the pressure vs. temperature of the systems “liquid + vapour” to liquid transitions are drawn. Data points from 1.5 bar to 70 bar are collected with a Cailletet apparatus. Both of the ILs show good CO₂ dissolution ability; an increase of the temperature leads to an increase of the pressure needed to dissolve similar amounts of CO₂. The presence of a Li-salt hampers gas storage, particularly for PYR₁₄TFSI. A model based on the Langmuir adsorption theory is used to describe the solubility of the CO₂ in [BMIm][BF4]. The PYR₁₄TFSI IL does not obey the Langmuir-like solubility behaviour. Hence, the solubility then is described by the formation of discrete bonds between the CO₂ and the solvent, similarly to the concept of adspecies and surface sites.     

A multi-objective selection procedure of determining a Pareto set

Ranking and selection (R&S) procedures have been widely studied and applied in determining the required sample size (i.e., the number of replications or batches) for selecting the best system or a subset containing the best system from a set of k alternatives. Most of the studies in the R&S have focused on a single measure of system performance. In many practical situations, however, we need to select systems based on multiple criteria. A solution is called Pareto optimal if there exists no other solution which is better in all criteria. This paper discusses extending a R&S procedure to select a Pareto set containing non-dominated systems. Computational results show that the proposed procedures are effective in obtaining non-dominated systems.     

The effect of perceptual load on attention-induced motion blindness: The efficiency of selective inhibition.

Recent visual marking studies have shown that the carry-over of distractor inhibition can impair the ability of singletons to capture attention if the singleton and distractors share features. The current study extends this finding to first-order motion targets and distractors, clearly separated in time by a visual cue (the letter X). Target motion discrimination was significantly impaired, a result attributed to the carry-over of distractor inhibition. Increasing the difficulty of cue detection increased the motion target impairment, as distractor inhibition is thought to increase under demanding (high load) conditions in order to maximize selection efficiency. The apparent conflict with studies reporting reduced distractor inhibition under high load conditions was resolved by distinguishing between the effects of "cognitive" and "perceptual" load. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

The MAGNeT Toolkit: Design, Implementation and Evaluation

The current trend in constructing high-performance computing systems is to connect a large number of machines via a fast interconnect or a large-scale network such as the Internet. This approach relies on the performance of the interconnect (or Internet) to enable fast, large-scale distributed computing. A detailed understanding of the communication traffic is required in order to optimize the operation of the entire system. Network researchers traditionally monitor traffic in the network to gain the insight necessary to optimize network operations. Recent work suggests additional insight can be obtained by also monitoring traffic at the application level. The Monitor for Application-Generated Network Traffic toolkit (MAGNeT) we describe here monitors application traffic patterns in production systems, thus enabling more highly optimized networks and interconnects for the next generation of high-performance computing systems.