W-Hierarchies Defined by Symmetric Gates

The classes of the W-hierarchy are the most important classes of intractable problems in parameterized complexity. These classes were originally defined via the weighted satisfiability problem for Boolean circuits. Here, besides the Boolean connectives we consider connectives such as majority, not-all-equal, and unique. For example, a gate labelled by the majority connective outputs true if more than half of its inputs are true. For any finite set C\mathcal{C} of connectives we construct the corresponding W( C\mathcal{C} )-hierarchy. We derive some general conditions which guarantee that the W-hierarchy and the W( C\mathcal{C} )-hierarchy coincide levelwise. If C\mathcal{C} only contains the majority connective then the first levels of the hierarchies coincide. We use this to show that a variant of the parameterized vertex cover problem, the majority vertex cover problem, is W[1]-complete.     

Vaporization--Condensation Generation of Ultrafine Hydrocarbon Particulate Matter for Inhalation Toxicology Studies

An evaporation/condensation particle generator produced 30-50 nm count median diameter particles from both pure hydrocarbons and from a complex mixture--used motor oil--at a concentration above 1 2 10 6 /cm 3 . The objective was to generate ultrafine aerosols for inhalation toxicology studies using specified organic components as surrogates for the particulate emissions generated by diesel internal combustion engines. This nanoparticle generation system, assembled from commercially available components, produced smaller particle size and higher particle number concentration than has been previously documented using Sinclair-La Mer condensation generator technology. The paper describes both the experiments used to design and characterize the particle generator and the operating conditions used for a specific inhalation experiment as an example of the system capability.     

Charge transport through interfaces: a tight-binding toy model and its implications

With the help of a tight-binding (TB) electronic-structure toy model we investigate the matching of parameters across hetero-interfaces. We demonstrate that the virtual crystal approximation, commonly employed for this purpose, may not respect underlying symmetries of the electronic structure. As an alternative approach we propose a method which is motivated by the matching of wave functions in continuous-space quantum mechanics. We show that this method obeys the required symmetries and can be applied in simple band to band transitions. Extension to multiple interfaces and to more sophisticated TB models is discussed.     

Whodunnit – Searching for the most important feature types signalling emotion-related user states in speech

In this article, we describe and interpret a set of acoustic and linguistic features that characterise emotional/emotion-related user states – confined to the one database processed: four classes in a German corpus of children interacting with a pet robot. To this end, we collected a very large feature vector consisting of more than 4000 features extracted at different sites. We performed extensive feature selection (Sequential Forward Floating Search) for seven acoustic and four linguistic types of features, ending up in a small number of ‘most important’ features which we try to interpret by discussing the impact of different feature and extraction types. We establish different measures of impact and discuss the mutual influence of acoustics and linguistics.     

Diffusion bonding of electroless Ni plated WC composite to Cu and AISI 316 stainless steel

In this study, a composite containing WC (Tungsten Carbide) and Ni was produced by two different processing routes. Electroless Ni coated WC powders were consolidated and sintered at 1200 °C. Diffusion bonding couples of WC(Ni)-electrolytic Cu, WC(Ni)-AISI 316 stainless steel and WC(Ni)-WC(Ni) were manufactured by using a preloaded compression system under Ar atmosphere. Diffusion bonding was carried out at varying bonding temperatures; 750 °C for (WC)Ni-Cu diffusion couple and 1200 °C for (WC)Ni-(WC)Ni and (WC)Ni-AISI 316 stainless steel diffusion couples. Standard metallographic techniques, Scanning Electron Microscopy and a shear test were employed to characterize the microstructure of bondline and mechanical properties of each diffusion couple, respectively.     

Comparative numerical studies of projectile impacts on plain and steel-fibre reinforced concrete

The enhanced energy absorption characteristics of fibre-reinforced concrete, compared to plain concrete, has in experimentally studies been shown to improve the projectile resistance and motivate its increased usage in protective structures. However, the high cost of undertaking experiments and the high parameter variation and dependency of the experimental setups and results, respectively, make it difficult to draw generic conclusions of how the addition and increased amount of fibres affects the local damage caused by projectile impact, which motivates the use of numerical simulations to study this. The numerical hydrocode AUTODYN was used in a qualitative study of how the addition of different amounts of fibres, modelled as different post-crack relations, influence the depth of penetration and crater formation on the front and rear face of a concrete target. Fibres added to the concrete mix had a minor influence on the depth of penetration while the crater size on both front and rear faces of the target decreases. The crack propagation beyond the crater on the front face was also reduced when fibres were added to the concrete. An increased amount of fibres in the concrete showed no effect on the size of the front-face crater, but led to further decreased size of the crater on the rear face of the concrete cylinder. It is concluded that the scabbing crater can be reduced in size and prevented by usage of fibre-reinforced concrete even if the depth of penetration is only slightly less than to penetration depth in plain concrete.     

Reoptimization of the Shortest Common Superstring Problem

A reoptimization problem describes the following scenario: given an instance of an optimization problem together with an optimal solution for it, we want to find a good solution for a locally modified instance.     

Six-layer lamination of a new dry film negative-tone photoresist for fabricating complex 3D microfluidic devices

We present a new epoxy-based negative-tone dry film photoresist (DFR) for fabricating multilayer microfluidic devices using a lamination process combined with a standard photolithography technology. As proof-of-concept, a complex 3D-hydrodynamic focusing device was produced via a six-layer lamination process of 33 µm-thick DFR layers. The bonding strength of the new DFR was tested on silicon, glass, and titanium substrates, respectively. A maximum bonding strength of 37 MPa was obtained for the dry film photoresist laminated on glass. No leakage was found, and burst tests proved excellent robustness and sealing reliability of the microchannels.     

Application of the Electrodiffusion Method to Measure Wall Shear Stress: Integrating Theory and Practice

The electrodiffusion method has been used in fluid dynamic research for the past 50 years. It allows the measurement of wall shear stress, a crucial parameter, e.g., for the cleaning of membrane modules used in water filtration. Various authors have published articles dealing with the theory behind this technique. But no paper collects all the knowledge assembled over five decades of application. Here, comprehensive summary of the theory of steady flow, unsteady flow, and transient voltage step experiments is given. Factors influencing the accuracy of the measurements are discussed. Furthermore, a new approach to calibrate the system from voltage step experiments is introduced, and practical issues related to its application in flow measurements are discussed for an exemplary signal response to a near‐wall flow.