Giant room-temperature magnetoresistance in single-crystal Fe/MgO/Fe magnetic tunnel junctions

The tunnel magnetoresistance (TMR) effect in magnetic tunnel junctions (MTJs) is the key to developing magnetoresistive random-access-memory (MRAM), magnetic sensors and novel programmable logic devices. Conventional MTJs with an amorphous aluminium oxide tunnel barrier, which have been extensively studied for device applications, exhibit a magnetoresistance ratio up to 70% at room temperature. This low magnetoresistance seriously limits the feasibility of spintronics devices. Here, we report a giant MR ratio up to 180% at room temperature in single-crystal Fe/MgO/Fe MTJs. The origin of this enormous TMR effect is coherent spin-polarized tunnelling, where the symmetry of electron wave functions plays an important role. Moreover, we observed that their tunnel magnetoresistance oscillates as a function of tunnel barrier thickness, indicating that coherency of wave functions is conserved across the tunnel barrier. The coherent TMR effect is a key to making spintronic devices with novel quantum-mechanical functions, and to developing gigabit-scale MRAM.     

Drivability improvement on deep-submicron MOSFETs by elevation ofsource/drain regions

Deep submicron MOSFETs with elevated source/drain (S/D) structures, where S/D extension regions were partially elevated besides deep S/D regions, were fabricated by use of Si selective epitaxial growth technique. As fairly compared with a well-developed conventional MOSFET, we clarify an advantage of the elevated S/D structures, i.e., improvement upon driving performance with keeping excellent short-channel characteristics, which is enhanced for decrease in gate sidewall spacer width. The experimental results are explained in terms of the reduction in S/D parasitic resistance by addition of the Si epitaxial layer where the impurity profile is suitable     

Cooking up an interactive olfactory game display.

It's long been possible to give users outside an actual environment that environment's visual and auditory information and thus contribute to establishing presence. However, we've yet to establish much presence when users require olfactory information - such as in environments focused on foods, flowers, perfumes, or, in some cases, more offensive smells. Recently, several VR researchers have become interested in olfaction and olfactory displays that present smells in virtual environments (VEs). In this article, we describe our interactive olfactory display. One of our development goals is to confirm the assumption that users' interactions with the system increases presence. Thus, we used our interactive olfactory display to develop a cooking game in collaboration with electronic engineers and artists.     

Immunochemical and Immunohistochemical Identification of a Minor Collagen in Raw Muscles of Decapod Mollusks

ABSTRACT: Approximately 10% of total muscle collagen in 6 decapod molluskan species was recovered as minor collagenous fractions by limited pepsin digestion and differential salt precipitation. The main alpha components (α1) in these fractions showed similar peptide maps of V-8 protease and lysyl endopeptidase digests to each other and had reactivity to the antiserum against the al component of the minor collagen (named Type SQ-II) from Todarodes pacificus muscle in immunoblot analysis. These results suggested that the minor molecular species of collagen corresponding to Type SQ-II of Todarodes pacificus was widely distributed in the mantle muscle of decapod mollusks. In addition, immunohistochemical experiments revealed that Type SQ-II collagen distributed mainly in intramuscular thin connective tissue (endomysium), suggesting the functional importance of this molecule to the development of meat texture of decapod mollusks.     

Enzymatic enrichment of arachidonic acid from Mortierella single-cell oil

An attempt was made to enrich arachidonic acid (AA) from Mortierella single-cell oil, which had an AA content of 25%. The first step involved the hydrolysis of the oil with Pseudomonas sp. lipase. A mixture of 2.5 g oil, 2.5 g water, and 4000 units (U) Pseudomonas lipase was incubated at 40°C for 40 h with stirring at 500 rpm. The hydrolysis was 90% complete after 40 h, and the resulting free fatty acids (FFA) were extracted with n-hexane (AA content, 25%; recovery of AA, 91%). The second step involved the selective esterification of the fatty acids with lauryl alcohol and Candida rugosa lipase. A mixture of 3.5 g fatty acids/lauryl alcohol (1:1, mol/mol), 1.5 g water, and 1000 U Candida lipase was incubated at 30°C for 16 h with stirring at 500 rpm. Under these conditions, 55% of the fatty acids were esterified, and the AA content in the FFA fraction was raised to 51% with a 92% yield. The long-chain saturated fatty acids in the FFA fraction were eliminated as urea adducts. This procedure raised the AA content to 63%. To further elevate the AA content, the fatty acids were esterified again in the same manner with Candida lipase. The repeated esterification raised the AA content to 75% with a recovery of 71% of its initial content.     

Retraction Note: Relationship between water content,shear deformation,and elastic wave velocity through unsaturated soil slope

Bulletin of Engineering Geology and the Environment -     

Control of indoor thermal environment based on concept of contribution ratio of indoor climate

The contribution ratio of indoor climate (CRI) derived from computational fluid dynamics (CFD) was developed to estimate the individual contribution of heat factors to any location inside a room. The CRI index indicates the structure of the temperature field and allows the CFD results to be applied to analysis and design, with more efficient application. In this study, the concept and calculation method for CRI is introduced first. As an example of the application of CRI, a method for predicting temperatures at any point in a room with a small number of temperature sensors based on CRI is developed. The accuracy of the method is examined by comparing the prediction with a coupled simulation of CFD and radiation.     

Hydroxypropyl-Distarch Phosphate from Potato Starch Increases Fecal Output, but Does Not Reduce Zinc, Iron, Calcium, and Magnesium Absorption in Rats

The physiological effects of hydroxypropyl‐distarch phosphate (HDP) were examined in rats. Male rats were fed a fiber‐free purified diet containing gelatinized potato starch (PS, 50 g/kg diet) that was not modified chemically or gelatinized, chemically modified potato starch (CMS, 50 g/kg diet) for 21 d. PS was used as the control. Six kinds of gelatinized HDP from potato with 2 different degrees of hydroxypropylation and 3 different degrees of cross‐linking were used as CMS. The wet weight and moisture of the fecal output of the rats fed highly hydroxypropylated HDP was 70% and 30% greater, respectively, than that in the control rats. The weights of the cecal wall and content of the rats fed highly hydroxypropylated HDP were 15% and 30% higher, respectively, than those of the control rats. The apparent absorption of Mg was 15% higher in the rats fed highly hydroxypropylated HDP than in the control rats. On the other hand, the apparent absorptions of Ca, Zn, and Fe were not affected by the diet. Cross‐linking did not influence the above‐mentioned physiological effects of HDP. Fecal excretion of bile acids and the plasma cholesterol concentration were not affected by the diet. These results show that the physiological effects of HDP depend on the hydroxypropylation but not the cross‐linking.     

Syntheses of alpha-arbutin-alpha-glycosides and their inhibitory effects on human tyrosinase

Alpha-arbutin is a tyrosinase inhibitor. We synthesized alpha-arbutin-alpha-glycosides by the transglycosylation reaction of cyclomaltodextrin glucanotransferase from Bacillus macerans using alpha-arbutin and starch as acceptor and donor molecules, respectively. We isolated and characterized two major products from the reaction mixture. The structural analyses using 13C- and 1H-NMR spectroscopy proved that they were 4-hydroxyphenyl alpha-maltoside (alpha-Ab-alpha-G1) and 4-hydroxyphenyl alpha-maltotrioside (alpha-Ab-alpha-G2). Both alpha-Ab-alpha-G1 and alpha-Ab-alpha-G2 exhibited competitive-type inhibition on human tyrosinase as alpha-arbutin does. Their K(i) values were calculated to be 0.6 mM and 2.8 mM, respectively, which is slightly and significantly higher than that of alpha-arbutin (0.2 mM).