On the inhibiting effect of phenolic compounds in the photopolymerization of acrylates under high‐intensity and polychromatic UV/visible lights

The photopolymerization of wood coatings under UV and visible light in industrial type conditions has been investigated. The inhibiting effect of the phenolic compounds found in wood extractives, especially quercetin, on the final properties of the coating (hardness, gel content) as well as the polymerization kinetics (rates, final conversion) has been discussed. Model clear‐coating formulations — based on an acrylate oligomer, a reactive diluent and a bis‐acylphosphine oxide as photo‐initiator — have been used. This article focuses on the influence of the nature of the acrylate oligomer (polyester, epoxy, polyurethane), the type of phenolic derivative (POHs) and the irradiation conditions (UV conveyor, Xe lamp). It appears that lead to through the strong inner‐filter effect in the presence of quercetin is responsible for the loss of all the observed properties. In order to mimic what happens at the wood–coating interface, the role of the diffusion of the phenolic derivatives have been also investigated and discussed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3285–3298, 2007     

Ethanolysis of rapeseed oil: Quantitation of ethyl esters,mono-, di-, and triglycerides and glycerol by high-performance size-exclusion chromatography

High-performance size-exclusion chromatography (HPSEC) was used to evaluate the influence of different variables affecting the transesterification of rapeseed oil (RSO) with anhydrous ethanol and sodium ethoxide as catalyst. The effect of temperature, ethanol/RSO molar ratio, catalyst concentration, and time can be interpreted by observing the variations of the reaction medium composition. HPSEC has made the quantitation of ethyl esters, mono-, di-, and triglycerides and glycerol possible. The best results for laboratory-scale reactions were obtained at 80°C with a 6:1 molar ratio of EtOH/RSO and 1% of NaOEt by weight of RSO.     

Diastereoselective Heterogeneous Catalytic Hydrogenation of Aromatic or Heteraromatic Compounds

The diastereoselective hydrogenation catalyzed by heterogeneous metallic catalysts uses a covalently bound chiral auxiliary to induce the chirality. It remains an active synthetic methodology in the asymmetric synthesis of chiral products and may proceed with high diastereoselectivity. This review describes recent examples using this method, such as hydrogenation of C=C, C=O, and C=N bonds. The use of a chiral auxiliary group has also been successfully applied to the hydrogenation of aromatic and heteroaromatic rings. The choice of the chiral auxiliary was found to play a key role in the asymmetric hydrogenation. The results could be explained in terms of steric effect, with a preferred conformation of the adduct substrate and the addition occurring from the less bulky side. The catalytic metal, the support and the presence of additives were also found to have a significant influence.     

A study about the effect of the temperature of hydrogen treatment on the properties of Ru/Al2O3 and Ru/C and their catalytic behavior during 1-heptyne semi-hydrogenation

The 1-heptyne selective hydrogenation carried out at 150 kPa, and at 283 and 303 K using Ru/Al₂O₃ and Ru/C as catalysts, was studied. Catalysts were prepared by the incipient wetness impregnation technique using RuCl₃ as precursor. Ru/Al₂O₃ was treated in hydrogen at 373 or 573 K and Ru/C only at the last temperature. Catalysts were characterized by hydrogen chemisorption, TPR and XPS. Ru dispersion after treatment in hydrogen at the highest temperature is similar for both catalysts. Ru is present as Ru⁰ in Ru/C, while Ru⁰ and Ru electron-deficient species are present on the catalysts surface after hydrogen treatment at the two temperatures using Al₂O₃ as support. The best catalytic behavior was observed for the highest temperature of hydrogen treatment and for 303 K reaction temperature. As a consequence of a shape selectivity effect of the C support, the best conversion is obtained with the alumina supported catalyst.     

Interaction between dietary protein and fat in triglyceride metabolism in the rat: Effects of soy protein and menhaden oil

The objective of the present study was to determine the mechanisms by which dietary proteins interact with dietary lipids in the regulation of triglyceridemia in rats. Male Sprague-Dawley rats (n=56) were subjected to 28-d experimental diets containing different combinations of proteins (20% w/w) and lipid sources (14% w/w): (i) casein-menhaden oil, (ii) casein-beef tallow, (iii) soy protein-menhaden oil, and (iv) soy protein-beef tallow. Significant protein-lipid interactions were observed on triglyceridemia and hepatic cholesterol in fasted rats. The combination of casein and beef tallow was associated with high plasma TG and hepatic cholesterol concentrations, which were reduced by substitution either of soy for casein or of menhaden oil for beef tallow. Therefore, triglyceridemia and liver cholesterol remained low with soy protein feeding, independently of the lipid source, as well as with menhaden oil feeding, regardless of the protein source. The menhaden oil diets reduced plasma cholesterol, hepatic TG, and TG secretion compared with beef tallow diets independently of the dietary protein source. Modifying the source of dietary proteins and lipids had no effect on post-heparin plasma lipoprotein lipase activity. These results demonstrate that soy protein can lower rat triglyceridemia relative to casein when associated with beef tallow consumption, whereas menhaden oil can attenuate hypertriglyceridemia when rats are fed casein. The data further suggest that part of the hypotriglyceridemic effect of soy protein in the rat may be mediated by reduced hepatic lipid synthesis, as is the case for menhaden oil.     

Toxicokinetics of 2,4-dihydroxy-7-methoxy-1,4-benzoxazin-3-one (DIMBOA) in the European corn borer,Ostrinia nubilalis (Hübner)

2,4-Dihydroxy-7-methoxy-1,4-benzoxazin-3-one (DIMBOA), the major hydroxamic acid present in corn, and its tritiated derivative, were prepared synthetically for use in the determination of the toxicokinetics of this insect deterrent in the European corn borer (ECB),Ostrinia nubilalis. In growth studies with DIMBOA (0, 0.05, 0.2, and 0.5 mg/g diet), the mean time to pupation and adult emergence were significantly lengthened by an increase in concentration. Pupal and adult weights, for both female and male, decreased with an increase in concentration. Increased larval and pupal mortality occurred at the highest concentration of DIMBOA. DIMBOA, at concentrations of 0.2 and 0.5 mg/g diet, resulted in a decrease in the number of egg masses produced per female, and at 0.5 mg/g diet, in a decrease in the number of eggs per egg mass. Larvae fed from the neonate stage on a diet containing 0.2 mg [³H]- + [¹H]DIMBOA/g diet showed an increase in the content of label from fourth to fifth instar, but levels declined at pupation and emergence. A large amount of the labeled compounds was excreted by the insect in the pupal case. In dose-related studies, both uptake and excretion increased with an increase in concentration of DIMBOA (0.05, 0.2, 0.4 mg/g diet), while a body burden (concentration in the tissues/concentration in the frass) of approximately 0.25 was maintained for all concentrations. At the highest dose of DIMBOA (0.4 mg/g), the ECB increased consumption, possibly to compensate for the toxic effects of the compound. In topical application studies, elimination of the labeled compound in the frass was rapid, reaching 65% by 4 hr and 88% by 48 hr. Accumulation of label in tissues other than hemolymph was low. The results show that the ECB does possess adaptive mechanisms to deal with the effects of this host-derived compound.     

Relationship between microstructure and mechanical properties of polyether block amide foams

The mechanical behaviors of five polyether block amide foams, obtained by mold-opening foam injection process, were investigated with regard to their microstructures. The materials vary in mass ratios of hard versus soft segments, and/or in process packing time. The resulting microstructures have been characterized in terms of cavity size and shape ratios, by analyzing scanning electron microscope images after careful sample preparation. The foam mechanical responses have been characterized in compression at small and large strain. At small strain, the initial linear part of the stress–strain curve is enhanced firstly by the hard segment mass ratio and secondly by the fineness of the microstructure. Similar results have been obtained at large strain. The foam viscoelasticity at large strain has been characterized by stress relaxation and strain recovery tests, relevant for foam applications. Reduced packing time and pressure have been shown to lead to the presence of undesired large cavities. The morphological defects appear to have a negligible impact on the macroscopic mechanical behavior of the foams at infinitesimal strain, but lead to critical inconsistency at large strain. Furthermore, the mechanical behavior of the tested polyether block amide foams is controlled first by hard versus soft segments ratio, and second by the microstructure fineness.     

NH_3 Plasma Surface Treatments of Engineering Fluoropolymers: A Way to Enhance Adhesion of Ni or Cu Thin Films Deposited by Electroless Plating

FLUOROPOLYMERS(FPs)are thermoplasticmaterials which exhibit a number of unique chemicaland physical characteristics that no other man-madeplastic product gets together.For example,FPs showvery good resistance to almost all chemicals,excellentwater vapor barrier properties,high thermal stability,outstanding electrical insulation properties(lowdielectric constant and dissipation factors),extremelylow frictional coefficient giving them high auto-lubrication properties,high resistance to rad…     

Dynamic Model Adaptation for Multiscale Simulation of Hyperbolic Systems with Relaxation

In numerous industrial CFD applications, it is usual to use two (or more) different codes to solve a physical phenomenon: where the flow is a priori assumed to have a simple behavior, a code based on a coarse model is applied, while a code based on a fine model is used elsewhere. This leads to a complex coupling problem with fixed interfaces. The aim of the present work is to provide a numerical indicator to optimize to position of these coupling interfaces. In other words, thanks to this numerical indicator, one could verify if the use of the coarser model and of the resulting coupling does not introduce spurious effects. In order to validate this indicator, we use it in a dynamical multiscale method with moving coupling interfaces. The principle of this method is to use as much as possible a coarse model instead of the fine model in the computational domain, in order to obtain an accuracy which is comparable with the one provided by the fine model. We focus here on general hyperbolic systems with stiff relaxation source terms together with the corresponding hyperbolic equilibrium systems. Using a numerical Chapman–Enskog expansion and the distance to the equilibrium manifold, we construct the numerical indicator. Based on several works on the coupling of different hyperbolic models, an original numerical method of dynamic model adaptation is proposed. We prove that this multiscale method preserves invariant domains and that the entropy of the numerical solution decreases with respect to time. The reliability of the adaptation procedure is assessed on various 1D and 2D test cases coming from two-phase flow modeling.     

A memetic algorithm to solve an unrelated parallel machine scheduling problem with auxiliary resources in semiconductor manufacturing

In this paper, we propose a metaheuristic for solving an original scheduling problem with auxiliary resources in a photolithography workshop of a semiconductor plant. The photolithography workshop is often a bottleneck, and improving scheduling decisions in this workshop can help to improve indicators of the whole plant. Two optimization criteria are separately considered: the weighted flow time (to minimize) and the number of products that are processed (to maximize). After stating the problem and giving some properties on the solution space, we show how these properties help us to efficiently solve the problem with the proposed memetic algorithm, which has been implemented and tested on large generated instances. Numerical experiments show that good solutions are obtained within a reasonable computational time.