Polarographic adsorption wave characteristics of copper complexes of substituted pyrazoles

Polarographic current—potential curves for cupric ions in the presence of low concentrations of 3-methyl pyrazole and 3,5-dimethyl pyrazole show three distinct reduction steps. The most negative of these shows characteristics of an adsorption post-wave and is attributed to the reduction of an adsorbed layer of the cuprous complex.     

Rheological characteristics of coal tar and petroleum pitches with and without additives

An extensive study of rheological characteristics of coal tar and petroleum pitches with and without additives, namely, petroleum coke, natural graphite and carbon black has been made. It is found that all pitches, pure or mixed with a carbon additive are not Newtonian as reported in the literature, but behave Theologically as Bingham plastics with certain yield stress and plastic viscosity at all temperatures of measurement between 85–180°C. The yield stress and plastic viscosity both decrease with increase in temperature of the pitch. A pure petroleum pitch having the same softening point as that of a coal tar pitch is found to have a lower viscosity compared to that of the latter at all temperatures of measurement. This suggests that the criterion of softening point as a measure of suitability of a coal tar pitch binder in the manufacture of artificial carbon is not sufficient for petroleum pitches. Addition of ten parts of carbon black by weight of pitch results in a considerable decrease in viscosity change with temperature of the coal tar pitch compared to almost insignificant change in the case of the petroleum pitch of the same softening point. However, the addition of petroleum coke or natural graphite makes the pitch more viscous but does not change the temperature dependence of viscosity of either of the two types of pitches. The implications are discussed.     

Anticorrosive properties of the epoxy–cardanol resin based paints

An epoxy–cardanol resin was developed using epichlorohydrin, bisphenol-A and cardanol. On evaluation it was found that epoxy–cardanol resin exhibits better properties as compared to epoxy resin in terms of increase in tensile strength, elongation, bond with steel and lowering of water vapour transmission of the film. The improvement in these properties indicated that the paints based on modified resin would be more durable than the epoxy based paints. Accordingly, paints were formulated using the developed resin and their performance were compared with their counterparts made with unmodified epoxy resin. Zinc powder, zinc phosphate, micaceous iron oxide and synthetic iron oxide were used as pigments along with fillers, additives and an aromatic polyamine adduct hardener. For both types of paints similar doses of pigments and additives were used. Physico-mechanical properties, chemical resistance and corrosion protection efficiency of the formulated paints were determined. It was found that the anticorrosive properties of epoxy–cardanol resin based paints are superior to that of the paints formulated with the unmodified epoxy resin. Micaceous iron oxide based paints in epoxy–cardanol resin showed the best performance followed by zinc phosphate based paints. It is concluded that the developed resin is a better binder media for the formulation of paints.     

Heterogeneous Plantinum Nucleation and Crystallization of a Heavy-Metal Fluoride Glass

The effect of controlled heterogeneous nucleation by platinum on the crystallization of a ZrF₄-BaF₂-LaF₃-AlF₃-NaF (ZBLAN) glass was studied. Various levels of platinum were incorporated into this glass by a combination of PtCl₂-doping and melting-atmosphere variation. The effect of doping levels and melting conditions on the incorporation of platinum and the subsequent nucleation of crystals was studied by optical microscopy, scanning electron microscopy, differential scanning calorimetry (DSC), and X-ray diffraction. Increased platinum in the glass resulted in an increased number of nucleation sites for the growth of β-ZrF₄-BaF₂ crystals. Analysis of isothermal and ramp-rate DSC measurements indicated that the crystallization of this glass changed from surface controlled to bulk controlled with an increased number of nuclei. This was confirmed by optical microscopy. In addition, Avrami analysis of the isothermal crystallization data gave an accurate approximation of the number of nuclei in the glass.     

Note on flash and distillation systems

Flash and distillation systems evolving on the equilibrium manifold possess stable steady states when the molar flows and the boundary conditions are fixed and a vapor and liquid phase is present at all times. The results extend the range of validity of a local stability theorem for linear, constant molar overflow systems due to Acrivos and Amundson. The approach to stability analysis is motivated by the tangent plane method developed by Gibbs to open systems as it takes advantage of the negative curvature of the entropy surface to construct a Lyapunov function. © 2013 American Institute of Chemical Engineers AIChE J, 59: 3322–3332, 2013     

Mechanical and thermal properties of wood fibers reinforced poly(lactic acid)/thermoplasticized starch composites

Thermoplasticized starch (TPS) filled poly(lactic acid) (PLA) blends are usually found to have low mechanical properties due to poor properties of TPS and inadequate adhesion between the TPS and PLA. The purpose of this study was to investigate the reinforcing effect of wood fibers (WF) on the mechanical properties of TPS/PLA blends. In order to improve the compatibility of wood with TPS/PLA blends, maleic anhydride grafted PLA (MA‐g‐PLA) copolymer was synthesized and used. TPS, TPS/PLA blends, and WF reinforced TPS/PLA composites were prepared by twin‐screw extrusion and injection molded. Scanning electron microscope and crystallinity studies indicated thermoplasticity in starch. WF at two different weight proportions, that is, 20% and 40% with respect to TPS content were taken and MA‐g‐PLA at 10% to the total weight was chosen to study the effect on mechanical properties. At 20% WF and 10% MA‐g‐PLA, the tensile strength exhibited 86% improvement and flexural strength exhibited about 106% improvement over TPS/PLA blends. Increasing WF content to 40% further enhanced tensile strength by 128% and flexural strength by 180% with respect to TPS/PLA blends. Thermal behavior of blends and composites was analyzed using dynamic mechanical analysis and thermogravimetric analysis. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46118.     

Pull-Down of Metalloproteins in Their Native States by Using Desthiobiotin-Based Probes

One-third of all proteins are estimated to require metals for structural stability and/or catalytic activity. Desthiobiotin probes containing metal binding groups can be used to capture metalloproteins with exposed active-site metals under mild conditions so as to prevent changes in metallation state. The proof-of-concept was demonstrated with carbonic anhydrase (CA), an open active site, Zn²⁺-containing protein. CA was targeted by using sulfonamide derivatives. Linkers of various lengths and structures were screened to determine the optimal structure for capture of the native protein. The optimized probes could selectively pull down CA from red blood cell lysate and other protein mixtures. Pull-down of differently metallated CAs was also investigated.     

Leading One Detection Hyperbolic CORDIC with Enhanced Range of Convergence

This paper focuses on developing an area efficient hyperbolic Coordinate Rotation Digital Computer (CORDIC) algorithm with performance improvement. The algorithm eliminates the need of scale factor calculation in the Range of Convergence (ROC). At the same time the range of convergence offered is higher than the conventional CORDIC ROC in the hyperbolic rotation mode. Being the only kind of algorithm in hyperbolic rotation with sign sequence μ?=?1 always, one complete operation requires just 5 iterations. Thus the pipelined implementation has 5 stages which provides a 50% increase in throughput in comparison to conventional CORDIC. As far as the area improvement is considered, 16-bit processor can be realized using 56% less number of full adders required by Flat-CORDIC. The x and y datapath are based on series expansion of hyperbolic functions. The complete algorithm design along with pipelined architecture implementation is detailed.     

Critical transition between cohesive and population-dividing responses to change

Globalization and global climate change will probably be accompanied by rapid social and biophysical changes that may be caused by external forcing or internal nonlinear dynamics. These changes often subject residing populations (human or otherwise) to harsh environments and force them to respond. Research efforts have mostly focused on the underlying mechanisms that drive these changes and the characteristics of new equilibria towards which populations would adapt. However, the transient dynamics of how populations respond under these new regimes is equally, if not more, important, and systematic analysis of such dynamics has received less attention. Here, we investigate this problem under the framework of replicator dynamics with fixed reward kernels. We show that at least two types of population responses are possible—cohesive and population-dividing transitions—and demonstrate that the critical transition between the two, as well as other important properties, can be expressed in simple relationships between the shape of reward structure, shift magnitude and initial strategy diversity. Importantly, these relationships are derived from a simple, yet powerful and versatile, method. As many important phenomena, from political polarization to the evolution of distinct ecological traits, may be cast in terms of division of populations, we expect our findings and method to be useful and applicable for understanding population responses to change in a wide range of contexts.