Crystal growth of MgAlB14-type compounds using metal salts and some properties

LEAlB₁₄ (orthorhombic, Imam) (LE = Li, Mg) crystals were grown using metal salts (Li₂CO₃, LiF, LiI, MgO, MgF₂, MgI₂) and crystalline boron from a high-temperature aluminium metal flux. The growth conditions for growing LEAlB₁₄ were established using the starting mixtures of B/LE = 2.0, and Al metal was added to each mixture at a mass ratio of 1:15–20. LEAlB₁₄ crystals from the Al-self flux using metal salts could be obtained from all the different salts. The maximum dimensions of LiAlB₁₄ and MgAlB₁₄ crystals were approximately 18 and 12 mm for the crystals obtained from LiF and MgF₂. The unit-cell parameters of as-grown LEAlB₁₄ are as follows: for LiAlB₁₄, obtained from LiF, a = 0.5846 (2) nm, b = 0.8144 (2) nm, c = 1.0355 (3) nm, V = 0.4930 (2) nm³: for MgAlB₁₄, obtained from MgF₂, a = 0.5845 (2) nm, b = 0.8114 (2) nm, c = 1.0330 (3) nm, V = 0.4899 (3) nm³. Microhardness, oxidation resistance and magnetic susceptibility of these materials are described in detail.     

Synthesis of ordered mesoporous carbon thin films at various temperatures in vapor infiltration method

Mesoporous carbon thin films with ordered structures were prepared by using resorcinol-surfactant self-assembly. A mixture of resorcinol, surfactant, and ethanol coated on silicon substrates was exposed to formaldehyde vapor as a cross-linking agent to form structured resorcinol/formaldehyde resin films. The films were then carbonized at 800 °C in an inert atmosphere to remove the surfactant and to obtain structured carbon materials. With this vapor infiltration method, thin films with several structures were obtained from the same precursor solution by employing different vapor infiltration temperatures. The results were interpreted from the transformation of the self-assembly during the vapor infiltration process.     

A statistical evaluation of the free energy of Fe-base ternary ordering alloys

The free energy of the Fe-base ternary ordering alloys whereB2 andD0₃ ordered structures are formed is evaluated. The statistical theory is employed using a pairwise interaction approximation taking into account not only the atomic interaction but also the magnetic interaction, based upon the Bragg-Williams-Gorsky model. The application of this model on Fe-Si-Co ordering alloys are demonstrated. The propriety of the calculation results are performed by comparing the experimental results. The influences of the magnetic energy to the stability of ordered structures are also demonstrated.     

An adaptive array utilizing an adaptive spatial averaging technique for multipath environments

When the interference is coherent with the desired signal, the conventional adaptive arrays working under the guiding principle of output power minimization tend to cancel the desired signal by using the coherent interference. A technique is described which enables the adaptive array to function even under such an environment. The array is divided into subarrays, whose input correlation matrices are adaptively averaged so as to produce a Toeplitz matrix which would be obtained when the interference did not correlate with the desired signal. The averaged matrix is now free from correlation terms between the desired signal and interference, and therefore may be used to derive the optimum weight for the array element just as in the ordinary radio environment of incoherent interference. Numerical examples show that the new adaptive array is highly capable to suppress the coherent interferences as well as incoherent ones.     

Microstructures of Annealed TiNiSn-Based Alloy Ribbons

The thermoelectric half-Heusler compounds Ti _x NiSn_0.998Sb_0.002 (x = 1.0 to 1.2) and Ti _y Zr_0.25Hf_0.25NiSn_0.998Sb_0.002 (y = 0.5 to 0.65) with nonstoichiometric nominal compositions were prepared by spin-casting and subsequent annealing at 1073 K for 24 h. The dimensionless figure of merit ZT at room temperature was maximized at x = 1.1 and y = 0.6 in Ti-rich compounds through an increase in absolute Seebeck coefficients despite a decrease in electrical conductivities. ZT reached 0.07 at x = 1.1 and 0.14 at y = 0.6. In powder x-ray diffraction analysis, minor phases of β-Sn, TiNi, Ti₂Sn, and Ti₅Sn₃ were observed in addition to a major phase of half-Heusler. The quantity of the minor phases was minimized at x = 1.1 and y = 0.55, where the absolute Seebeck coefficients are maximized. In transmission electron microscopic (TEM) analysis of Ti_0.55Zr_0.25Hf_0.25NiSn_0.998Sb_0.002, crystal grains of the half-Heusler phase, from several hundred nanometers to several micrometers in size, were observed. TEM energy-dispersive spectroscopy measurements indicated that fluctuations of Ti, Zr, and Hf compositions within the Ti-site in the half-Heusler phase may occur. Thermoelectric properties were improved at x = 1.1 and y = 0.6 rather than at the stoichiometric compositions of x = 1.0 and y = 0.5 due to minimization of the precipitate quantities.     

An application of rapid freezing,freeze substitution–fixation for scanning electron microscopy

A combined technique of the rapid freezing, freeze substitution–fixation method and the osmium–DMSO-osmium method was devised. By this combined method we clearly observed the architecture of intracellular components in three dimensions. Morphological characteristics were generally similar to those of tissue prepared by the osmium–DMSO-osmium method but different in some respects. Mucigen droplets in intestinal goblet cells, for example, appeared as separated spheres, while in specimens prepared by chemical fixation they were observed as a mass of fused droplets. In the Golgi complex, all cisternae were extremely flat, although they usually dilated on the cis side after chemical fixation. Particles on the mitochondrial tubules of liver cells were well distinguished. They were mushroom shaped, as are those observed by negative staining. The combined method, that is, the rapid freezing, osmium–DMSO-osmium method, is thought to be effective for studying the true structure of intracellular components by scanning electron microscopy.     

Design of a memory‐based prefilter supplementing a robust PID control system

For systems with uncertainties, lots of PID parameter tuning methods have been proposed from the view point of the robust stability theory. However, the control performance becomes conservative using robust PID controllers. In this paper, a new two‐degree‐of‐freedom (2DOF) controller, which can improve the tracking properties, is proposed for nonlinear systems. According to the proposed method, the prefilter is designed as the PD compensator whose control parameters are tuned by the idea of a memory‐based modeling (MBM) method. Since the MBM method is a type of local modeling methods for nonlinear systems, PD parameters can be tuned adequately in an online manner corresponding to nonlinear properties. Finally, the effectiveness of the newly proposed control scheme is numerically evaluated on a simulation example. Copyright © 2008 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Cu-NMR study on high-T c cuprate La1.89Ca1.11Cu2O6+δ (La2126)

Cu-NMR spectra and the nuclear spin-lattice relaxation rate T ₁ ^-1 have been studied intensively on the bilayer type high-T_c cuprate La_1.89Ca_1.11Cu₂O₆₊ (La2126). The resonance line shift showed a monotonic decrease with lowering temperature in the normal state, indicating that this compound belongs to the lightly-doped region. The Curie-Weiss temperature dependence of (T₁T)^–1 in the normal state shows that the pseudo spin-gap does not always exist in the light-doped bilayer systems.     

Non-degenerate Linear Codes Determined by their Weight Enumerators

 In [1], Homma-Kim-Yoo showed that a code C such that the support of the associated projective system is a union of two linear subspaces, is uniquely determined up to equivalence by its weight enumerator. Let W _C (z) be the weight enumerator of a code C. Assuming certain conditions on the coefficients of W _C (z) for some range, we prove that the support of the associated projective system is a union of two linear subspaces. Received: February 27, 2002; revised version: October 2, 2002 Keywords: Linear code, Projective system, Weight enumerator. MSC2000: 94B27, 94B65, 51E20 Partially supported by Grant-in-Aid for Scientific Research, Ministry of Education, #12640180