Development of a new sensorless vector‐controlled and transmissionless electric vehicle using a permanent‐magnet synchronous motor

One of the most important technologies for electric vehicles (EVs) will be drive control technology for the main motor. It is desired that the drive control technology have the following characteristics. (1) It does not require a position/speed sensor for controlling motor drive, which has been mounted on the rotor shaft. (2) It has vector controls that can produce torque quickly, efficiently, and/or precisely. (3) It has wide driving‐range and allows developing EVs with no variable transmission. This paper proposes new drive control technologies for such EVs using a permanent‐magnet synchronous motor as a main motor, and verifies its usefulness through development of an actual EV that can drive on public roads. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(3): 83–94, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20459     

Oxidative Stress and Its Significant Roles in Neurodegenerative Diseases and Cancer

Reactive oxygen and nitrogen species have been implicated in diverse pathophysiological conditions, including inflammation, neurodegenerative diseases and cancer. Accumulating evidence indicates that oxidative damage to biomolecules including lipids, proteins and DNA, contributes to these diseases. Previous studies suggest roles of lipid peroxidation and oxysterols in the development of neurodegenerative diseases and inflammation-related cancer. Our recent studies identifying and characterizing carbonylated proteins reveal oxidative damage to heat shock proteins in neurodegenerative disease models and inflammation-related cancer, suggesting dysfunction in their antioxidative properties. In neurodegenerative diseases, DNA damage may not only play a role in the induction of apoptosis, but also may inhibit cellular division via telomere shortening. Immunohistochemical analyses showed co-localization of oxidative/nitrative DNA lesions and stemness markers in the cells of inflammation-related cancers. Here, we review oxidative stress and its significant roles in neurodegenerative diseases and cancer.     

Hydrostatic Pressure Influences HIF-2 Alpha Expression in Chondrocytes

Hypoxia-inducible factor (HIF)-2α is considered to play a major role in the progression of osteoarthritis. Recently, it was reported that pressure amplitude influences HIF-2α expression in murine endothelial cells. We examined whether hydrostatic pressure is involved in expression of HIF-2α in articular chondrocytes. Chondrocytes were cultured and stimulated by inflammation or hydrostatic pressure of 0, 5, 10, or 50 MPa. After stimulation, heat shock protein (HSP) 70, HIF-2α, nuclear factor kappa B (NF-κB), matrix metalloproteinase (MMP)-13, MMP-3, and vascular endothelial growth factor (VEGF) gene expression were evaluated. The levels of all gene expression were increased by inflammatory stress. When chondrocytes were exposed to a hydrostatic pressure of 5 MPa, HIF-2α, MMP-13, and MMP-3 gene expression increased significantly although those of HSP70 and NF-κB were not significantly different from the control group. In contrast, HIF-2α gene expression did not increase under a hydrostatic pressure of 50 MPa although HSP70 and NF-κB expression increased significantly compared to control. We considered that hydrostatic pressure of 5 MPa could regulate HIF-2α independent of NF-κB, because the level of HIF-2α gene expression increased significantly without upregulation of NF-κB expression at 5 MPa. Hydrostatic pressure may influence cartilage degeneration, inducing MMP-13 and MMP-3 expression through HIF-2α.     

In situ preparation of nano ZnO/hyperbranched polyimide hybrid film and their optical properties

Novel hybrid films of fluorinated hyperbranched polyimide (HBPI) and zinc oxide (ZnO) were prepared via the in situ sol-gel polymerization technique, in which mono-ethanolamine (MEA) was used as the coupling agent between the termini of HBPI and the precursor of ZnO. The hybrid films were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) absorption, ultraviolet-visible (UV-vis) absorption, and fluorescent excitation/emission spectroscopy. The films, which originated from the colourless fluorinated HBPI structure and homogeneously dispersed ZnO nanoparticles, exhibited good optical transparency. Furthermore, two kinds of model compounds with and without ZnO and a HBPI film blended with ZnO microparticles were prepared to clarify the fluorescence mechanism in the pristine HBPI and in situ hybrid films. Efficient energy transfer from the ZnO nanoparticles to the aromatic HBPI main chains was observed in the in situ hybrid films, whereas energy transfer occurred only from the locally excited (LE) states to the charge-transfer (CT) state in the HBPI film. These facts demonstrate that the peripheral termini of HBPI are covalently bonded to ZnO particles via the MEA function, which operates as an effective pathway for energy transfer to give intense fluorescent emission.     

Biosynthesis of p-anisaldehyde by the white-rot basidiomycete Pleurotus ostreatus

The white-rot basidiomycete Pleurotus ostreatus produced sweet flavor compounds on a liquid medium. The major and minor compounds identified by GC-MS analysis were p-anisaldehyde (4-methoxybenzaldehyde) and 3-chloro-p-anisaldehyde (3-chloro-4-methoxybenzaldehyde), respectively. p-Anisaldehyde was only produced under static culture conditions. Differences in the type and quantity of flavor compounds produced among wild strains of P. ostreatus were observed. Aryl alcohol oxidase and manganese peroxidase activities increased parallel to the production of p-anisaldehyde. These results indicated that the biosynthesis of p-anisaldehyde is concerned in generating H2O2-activated peroxidase in the lignin-degradation system. Addition of L-tyrosine to the culture led to higher production of p-anisaldehyde. The flavor extract, which contains p-anisaldehyde, exhibited antimicrobial activity against Bacillus subtilis, Pseudomonas aeruginosa, Aspergillus niger and Fusarium oxysporum.     

Thermal and optical properties of hyperbranched fluorinated polyimide/mesoporous SiO2 nanocomposites exhibiting high transparency and reduced thermo-optical coefficients

A series of hyper-branched polyimide (HBPI)/mesoporous SiO₂ nanocomposite films were prepared from a fluorinated anhydride (6FDA), a fluorinated triamine (TFAPOB), and mesoporous SiO₂ nanoparticles (NPs). The anhydride-terminated precursor of HBPI was functionalized using a coupling agent prior to mixing with SiO₂ NPs. The morphologies and thermal-optical properties of the nanocomposite films were investigated, with particular focus on their optical transparency, refractive indices (n), and thermo-optical (TO) coefficients. The absolute values of TO coefficients (|dn/dT|) of HBPI film (50.8 ppm/K) were significantly reduced to 13.4 ppm/K by homogeneous dispersion of 15 wt% of SiO₂ NPs. The HBPI/SiO₂ composite films exhibited high thermal stability without significant weight loss of up to 400 °C in air. The films also exhibited small coefficients of linear thermal expansion (CTEs) within the range 30–40 ppm/K. In addition, enhanced interfacial interactions between SiO₂ and HBPI significantly improve the optical transparency with cutoff wavelengths shorter than 450 nm. The refractive indices of HBPI/SiO₂ composite films were found to range from 1.477 to 1.502, which agrees well with the calculated values. This study shows that the incorporation of SiO₂ NPs in multi-functional HBPI matrix is a promising approach to prepare high performance thermally stable films for thermo-optic applications.     

Production of hyaluronic‐acid‐based cell‐enclosing microparticles and microcapsules via enzymatic reaction using a microfluidic system

This article describes the preparation of cell‐enclosing hyaluronic acid (HA) microparticles with solid core and microcapsules with liquid core through cell‐friendly horseradish peroxidase (HRP)‐catalyzed hydrogelation. The spherical vehicles were made from HA derivative possessing phenolic hydroxyl moieties (HA‐Ph) cross‐linkable through the enzymatic reaction by extruding cell‐suspending HA‐Ph aqueous solution containing HRP from a needle of 180 μm in inner diameter into the ambient coaxial flow of liquid paraffin containing H₂O₂ in a microtubule of 600 μm in diameter. By altering the flow rate of liquid paraffin, the diameters of gelatin and HA‐Ph microparticles were varied in the range of 120–220 μm and 100–300 μm, respectively. The viability of the enclosed human hepatoma HepG2 cells in the HA‐Ph microparticles of 180 μm in diameter was 94.2 ± 2.3%. The growth of the enclosed HepG2 cells was enhanced by decreasing the HRP concentration. The microcapsules of 200 μm in diameter were obtained by extruding HA‐Ph aqueous solution containing thermally liquefiable cell‐enclosing gelatin microparticles of 150 μm in diameter using the same microfluidic system. The enclosed cells grew and filled the cavity within 10 days. Spherical tissues covered with a heterogeneous cell layer were obtained by degrading the microcapsule membrane using hyaluronidase after covering the surface with a heterogeneous cell layer. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43107.     

Digestion of crosslinked poly(vinylpyridinium halide) by activated sludge,and application to make poly(methyl methacrylate) biodegradable by incorporation of a pyridinium group into the main chain

Crosslinked poly(N-benzyl-4-vinyipyridinium bromide) has been found to be digested by activated sludge obtained from sewage works. As an extension of this work, the authors attempted to make poly(methyl methacrylate) biodegradable by incorporation of a pyridinium group. Poly(methyl methacrylate) containing a small amount of N-benzyl-4-vinylpyridinium chloride in the main chain showed remarkable reduction in molecular weight and gravimetric weight when placed in an aeration tank of a sewage works. Molecular weight reduction by activated sludge was more conspicuous when content of the pyridinium group was larger and the original molecular weight before the biological treatment was lower. Since insoluble pyridinium-type polymer captures microbial cells alive, this biodegradation appears to be facilitated by enhancement of affinity of the synthetic hydrophobic polymer with cells of microogranisms. © 1994 John Wiley & Sons, Inc.     

Abscopal Effect of Frozen Autograft Reconstruction Combined with an Immune Checkpoint Inhibitor Analyzed Using a Metastatic Bone Tumor Model

We evaluated the abscopal effect of re-implantation of liquid nitrogen-treated tumor-bearing bone grafts and the synergistic effect of anti-PD-1 (programmed death-1) therapy using a bone metastasis model, created by injecting MMT-060562 cells into the bilateral tibiae of 6–8-week-old female C3H mice. After 2 weeks, the lateral tumors were treated by excision, cryotreatment using liquid nitrogen, excision with anti-PD-1 treatment, and cryotreatment with anti-PD-1 treatment. Anti-mouse PD-1 4H2 was injected on days 1, 6, 12, and 18 post-treatment. The mice were euthanized after 3 weeks; the abscopal effect was evaluated by focusing on growth inhibition of the abscopal tumor. The re-implantation of frozen autografts significantly inhibited the growth of the remaining abscopal tumors. However, a more potent abscopal effect was observed in the anti-PD-1 antibody group. The number of CD8+ T cells infiltrating the abscopal tumor and tumor-specific interferon-γ (IFN-γ)-producing spleen cells increased in the liquid nitrogen-treated group compared with those in the excision group, with no significant difference. The number was significantly higher in the anti-PD-1 antibody-treated group than in the non-treated group. Overall, re-implantation of tumor-bearing frozen autograft has an abscopal effect on abscopal tumor growth, although re-implantation of liquid nitrogen-treated bone grafts did not induce a strong T-cell response or tumor-suppressive effect.     

以辉锑矿为原料放电等离子烧结快速制备黝铜矿Cu_(12)Sb_4S_(13)及反应机理

采用辉锑矿为原料成功制备出Cu_(12)Sb_4S_(13)块体。研究以Sb_2S_3矿物为原料时烧结工艺对Cu_(12)Sb_4S_(13)合成的影响。在400 ～ 440℃温度区间内均可快速合成Cu_(12)Sb_4S_(13)块体且二次烧结能够进一步减小中间相CuSbS_2和Cu_3SbS_3。第二相Cu_3SbS_4和残留相CuS随着烧结时间的延长而降低。二次烧结前进行机械化球磨处理,干磨比湿磨更容易减小残留相。初次烧结块体的断面SEM和EDS能谱分析表明内部存在Cu或Cu_2S颗粒团聚现象。适当降低Cu或CuS摩尔量(化学计量比0.1 mol)能促进烧结块表面反应进行。烧结过程中,硫磺蒸汽压的导致烧结块表面成分和内部粉末的成分不同。