Effect of refrigerant charge on the performance of air conditioning systems

An air conditioning system operates in an optimal condition if the system is fully charged with a specified amount of refrigerant. Poor field maintenance or refrigerant leakage causes low level of charge resulting in a lower thermal performance and higher operating cost. An experimental investigation was conducted to study the effect of low charge level of R‐22 on the performance of a 3‐ton residential air conditioning system. The experimental results show that if a system is undercharged to 90 per cent then the effect is small: a 3.5 per cent reduction in cooling capacity and a 2 per cent increase in the coefficient of performance (COP). However, the system performance suffers serious degradation if the level of charge drops below 80 per cent. An ice layer formed on the outer surface of the cooling coil impedes the heat transfer between the warm air and cold refrigerant vapour. An economic analysis shows that the cost of properly charging an under‐charged system which is at an 85 per cent charge level, can pay for itself in savings in a short period of 3–4 months. Copyright © 2001 John Wiley & Sons, Ltd.     

Instant synthesis of mesoporous monolithic materials with controllable geometry,dimension and stability: a review

The development of the nanoscale structures and their integration into components, systems, and natural architectures (such as monoliths), and large-scale devices, is one of the most promising areas in the emerging field of nanotechnology. We believe that it is time to write a review that focused on the rapid synthesis and the functional properties of HOM mesoporous monoliths. Thus, we here introduce comprehensive and up-to-date reports on the instant synthesis (within minutes) of a range of mesoporous silica monoliths (HOM-type, High-Order-Monolith) by means of a direct-templating method of lyotropic and microemulsion liquid crystalline phases. A number of nonionic n-alkyl-oligo(ethylene oxide), namely, Brij-type (C _x EO _y ), and Triton- and Tween-type and cationic alkyl trimethylammonium bromide or chloride (C _n TMA-B or -C, where n = 12, 14, 16 and 18) surfactants were used as soft templates. A variety of 1D, 2D and 3D mesostructure geometries were successfully fabricated by using this simple, fast and yet reproducible design strategy. This is the first and detailed review of using rapid synthesis to fabricate disordered and ordered silica/surfactant mesophases with supermicro- and meso-pore engineering systems. In this review, we also addressed the prominent factors affected the formation of the large-scale ordered and worm-like structures (HOM): (1) the phase composition of domains, (2) the extent of solubilization of hydrocarbons, and (3) the nature of surfactant molecules (corona/core features). Significantly, due to large morphological particle sizes, these HOM monolithic structures exhibited considerable structural stability against longer hydrothermal treatment times. Such retention is crucial in industrial applications.     

The Ameliorative Effect of Dexamethasone on the Development of Autoimmune Lung Injury and Mediastinal Fat-Associated Lymphoid Clusters in an Autoimmune Disease Mouse Model

In our previous study, we revealed the ameliorative therapeutic effect of dexamethasone (Dex) for Lupus nephritis lesions in the MRL/MpJ-Fas ^lpr/lpr (Lpr) mouse model. The female Lpr mice developed a greater number of mediastinal fat-associated lymphoid clusters (MFALCs) and inflammatory lung lesions compared to the male mice. However, the effect of Dex, an immunosuppressive drug, on both lung lesions and the development of MFALCs in Lpr mice has not been identified yet. Therefore, in this study, we compared the development of lung lesions and MFALCs in female Lpr mice that received either saline (saline group “SG”) or dexamethasone (dexamethasone group “DG”) in drinking water as a daily dose along with weekly intraperitoneal injections for 10 weeks. Compared to the SG group, the DG group showed a significant reduction in the levels of serum anti-dsDNA antibodies, the size of MFALCs, the degree of lung injury, the area of high endothelial venules (HEVs), and the number of proliferating and immune cells in both MFALCs and the lungs. A significant positive correlation was observed between the size of MFALCs and the cellular aggregation in the lungs of Lpr mice. Therefore, this study confirmed the ameliorative effect of Dex on the development of lung injury and MFALCs via their regressive effect on both immune cells’ proliferative activity and the development of HEVs. Furthermore, the reprogramming of MFALCs by targeting immune cells and HEVs may provide a therapeutic strategy for autoimmune-disease-associated lung injury.     

Enhancing the rheological,technological, textural and microstructural characteristics of set yoghurt using certain nano-stabilisers

The purpose of this study was to investigate the impact of adding nano-stabilisers on some properties of yoghurt. Carboxymethyl cellulose (CMC), sodium alginate (SA) and kappa-carrageenan (K-C) were used at 0.2%, 0.2% and 0.02% in their original forms and 0.15%, 0.15% and 0.015% in nano-form, respectively. The effects of these additives on yoghurt pH, titratable acidity, viscosity, syneresis, texture, colour, starter culture bacterial count, mould and yeast count, coagulation time and microstructure were studied. The use of nano-stabilisers increased viscosity, hardness and coagulation time; reduced syneresis and Streptococcus thermophilus count; and improved colour. Results indicated that nano-stabilisers improved the rheological and technological characteristics of yoghurt.     

Optimal throughput performance in full-duplex relay assisted cognitive networks

Wireless Networks - In this paper, we study a full-duplex cooperative cognitive radio network with multiple full-duplex secondary users acting as potential relays for transmitting the packets of a...     

A Hybrid Modular Context-aware Services Adaptation for a Smart Living Room

Smart spaces have attracted considerable amount of interest over the past few years. The introduction of sensor networks, powerful electronics and communication infrastructures have helped a lot in the realization of smart homes. The main objective of smart homes is the automation of tasks that might be complex or tedious for inhabitants by distracting them from concentrating on setting and configuring home appliances. Such automation could improve comfort, energy savings, security, and tremendous benefits for elderly persons living alone or persons with disabilities. Context awareness is a key enabling feature for development of smart homes. It allows the automation task to be done proactively according to the inhabitant’s current context and in an unobtrusive and seamlessly manner. Although there are several works conducted for the development of smart homes with various technologies, in most cases, robust. However, the context-awareness aspect of services adaptation was not based on clear steps for context elements extraction (resp. clear definition of context). In this paper, we use the divide and conquer approach to master the complexity of automation task by proposing a hybrid modular system for context-aware services adaptation in a smart living room. We propose to use for the context-aware adaptation three techniques of machine learning, namely Naïve Bayes, fuzzy logic and case-based reasoning techniques according to their convenience.     

Numerical simulation of thermofluid characteristics of two-phase slug flow in microchannels

A fundamental study of heat transfer characteristics of two-phase slug flow in microchannels is carried out employing the Volume-of-Fluid (VOF) method. Despite of the fact that numerical simulations of two-phase flows in microchannels have been attempted by many investigators, most efforts seem to have failed in correctly capturing the flow physics, especially those pertaining to the slug flow regime characteristics. The presence of a thin liquid film in the order of 10 μm around the bubble is a contributing factor to the above difficulty. Typically, liquid films have a significant effect on the flow field and heat transfer characteristics. In the simulations reported in this paper, the film is successfully captured and a very high local convective heat transfer coefficient is observed in the film region. A strong coupling between the conductive heat transfer in the solid wall and the convective heat transfer in the flow field is observed and characterized. Results showed that unsteady heat transfer through the solid wall in the axial direction is comparable to that in the radial direction. Results also showed that a fully developed condition could be achieved fairly quickly compared to single-phase flows. The fully developed condition is defined based on the Peclet number (Pe) and a dimensionless length of the liquid slug. Local and time-averaged Nusselt numbers for slug flows are reported for the first time. It was found that significant improvements in the heat transfer coefficient could be achieved by short slugs where the Nusselt number was found to be 610% higher than in single-phase flows. The study revealed new findings related to slug flow heat transfer in microchannels with constant wall heat flux.     

Plasma myeloperoxidase,NT‐proBNP,and troponin‐I in patients on CAPD compared with those on regular hemodialysis

Myeloperoxidase (MPO) is a hemoprotein that is released during inflammation and may lead to irreversible protein and lipid modification, increasing levels of oxidized low density lipoprotein, and promoting athrogenesis. Recently, it has been considered as a risk factor for cardiovascular diseases. Similarly, the measurement of carotid intima‐media thickness gives an indication about the degree of atherosclerosis and prediction of clinical cardiovascular events. Elevated white blood cells counts may indicate a state of acute inflammation and follow its progression. Dialysis patients are at a high risk of developing cardiovascular disease compared with healthy subjects. The role of N‐terminal pro‐brain natriuretic peptide and increased cardiac troponin in identification and prognostication of cardiovascular diseases in end‐stage renal disease patients has been investigated. The current study aimed to evaluate plasma MPO and its possible relationship with carotid intima‐media thickness, troponin I, N‐terminal pro‐brain natriuretic peptide (NT‐proBNP), and insulin resistance as measured by homeostatic model assessment (HOMA index) in a cohort of Saudi patients who are undergoing hemodialysis (HD) vs. continuous ambulatory peritoneal dialysis for end‐stage renal disease. Plasma MPO was significantly higher in patients on continuous ambulatory peritoneal dialysis (CAPD) than in those on HD and in normal subjects (P<0.001). Conversely, NT‐proBNP plasma levels were significantly higher in patients on HD (both predialysis and postdialysis) than in those on CAPD (P<0.01) and than normal subjects. Similarly, plasma troponin‐I levels were significantly higher in patients on HD compared with those of CAPD and than normal subjects (P<0.001). Plasma troponin‐I and NT‐proBNP levels were positively correlated in the 3 groups namely those on CAPD, Pre‐HD, and post‐HD (r: 0.464 and P=0.047; r: 0.330 and P=0.013; and r: 0.452 and P=0.024), respectively. There was no correlation between the MPO level and carotid intima‐media thickness (P>0.05). However, plasma MPO level correlated positively with the white blood cell count in patients on CAPD and in those on HD (P<0.05). Our findings suggest an increased oxidative stress in CAPD patients compared with HD patients, while the reported difference in plasma NT‐proBNP and troponin‐I may be related to the rapid decline of residual renal function in HD and type of membrane used in the HD dialysis procedure itself.