Theory and performance of series connected self-excited synchronousgenerators

The series connected self-excited synchronous generator is a slip ring type induction machine with stator and rotor windings connected in series along with excitation capacitors. The machine, when self-excited, will yield an output voltage with a frequency equal to half the rotor angular speed. This paper presents analytical as well as experimental investigations into machine performance. The analysis is based on a deduced phasor diagram. The suggested method of analysis is simple and makes it possible to study the effect of machine parameters on its performance. Useful conclusions are given showing proper design considerations to be accounted for to allow the machine to develop acceptable output levels     

2GW Britain-France H. V. D. C. Link Transition Joint - Transient Stresses

The maximum values of stress in the joint have been determined for surges and sudden changes in applied voltage and are within the specification for the materials. In the treatment of long term transients arising from polarity reversals the polarization characteristics of the various materials are included. No change in the stress distributions for both 4h and 24h polarity reversals is found after the first six reversals for the Voltalit gas region and after the first three for the paper/oil region.     

Resilient BBU placement in 5G C-RAN over optical aggregation networks

Photonic Network Communications - The huge data demand envisioned for the 5G requires radical changes in the mobile network architecture and technology. Centralized radio access network (C-RAN) is...     

Lubricant Oils as a Certified Reference Material for Cleveland Open Cup Flash Point Testers

The flash point is an important indicator for the flammability of the liquid materials and also in the development of safe practices for handling and storage of these materials. The production of certified reference materials is essential to guarantee the performance of the flash point measurement apparatus so that it can be trusted and acceptable for its intended use. In this work lubricant oils of high molecular weight hydrocarbons (HM1, and HM2) were tested as certified reference materials in accordance with ISO guide 34 and 35 by using the high flash point temperature detector Cleveland-open cup as per ASTM D-92. The selected oils were tested for uncertified properties like pour point, viscosity, cloud point, density, and total acid number. The thermal analysis techniques DSC, and TGA were used to ensure the thermal stability of the lubricant oils and its ability to be used as high temperature flash point reference material. The certified value of the flash point temperature was assigned upon evaluation of the data acquired in an inter-laboratory comparison involving expert laboratories using the same measurement method. The certified values of the candidate reference materials with expanded uncertainty (coverage factor K = 2, approximate 95% confidence level) calculated using the results of the characterization, calibration (organizer lab), homogeneity, and stability assessment were 232 ± 9 °C for HM1, and 242 ± 10 °C for HM2.     

The effects of fly ash composition on the chemistry of pore solution in hydrated cement pastes

This paper reports the findings of an investigation to determine the influence of fly ash composition on the evolution of the pore solution chemistry in Portland cement/fly ash systems. Twelve fly ashes, selected to represent the wide range of composition of North American ashes, were used in the study. In addition to pore solution expression and analysis, inner hydration products were analyzed using energy-dispersive X-ray analysis. The study shows that the alkalinity of pore solution increases as the calcium and alkali content of the fly ash increase, and decreases as the silica content of the ash increases. However, there is no consistent trend between the composition of the inner calcium-silicate hydrate and fly ash composition.     

Petrographic and petrophysical characterization of some Paleozoic rocks,Um Bogma area,Southwest Sinai,Egypt

Sixty-two samples were collected from the five formations at Um Bogma area, (Southwest Sinai, Egypt). Nine samples were collected from Sarabit El Khedim Formation, ten samples were collected from Abu Hamata Formation, eighteen samples were collected from Adedia Formation, eight samples were collected from Um Bogma Formation and eighteen samples were collected from Abu Thora Formation.The Paleozoic rocks at Um Bogma area, consist mainly of sandstones, siltstones, shales, limestone and dolostones, which are unconformably overlie igneous and metamorphic rocks (granite, diorite and gneiss) of Precambrian age.The petrographic studies were applied to identify different rock units, different facies and its diagenetic history and to reveal its effect on the storage capacity properties. Different types of porosity (oversized, intergranular, fracture and vuggy porosities) have been identified based on the petrographic investigation of the studied thin sections.The Paleozoic sandstone rock samples are characterized by porosity average about 19% for Facies 1 (quartz wack) and about 18%for Facies 2 (quartz arenite) and permeability average 420?mD for Facies 1 (quartz wack) and 690?mD for Facies 2 (quartz arenite), so these rocks can be considered as good reservoir rocks. The Paleozoic carbonate rock samples (Facies 3) are characterized by poor porosity (less than 7%) and very low permeability (less than 0.5?mD), which caused by matrix and diagenetic processes and refer to bad reservoir rocks.Porosity can be linked to the two derived electrical properties (formation resistivity factor and electrical tortuosity) of the studied Paleozoic rocks at Um Bogma area. The electrical tortuosity has significant effects on both permeability and formation resistivity factor. The permeability decreases with increasing electrical tortuosity and the relation between both of them is inverse relationship with good coefficient of correlation. The permeability decreases with increasing electrical tortuosity and the relations between both of them are inverse relationships with high coefficient of correlation. The formation resistivity factor increases with increasing electrical tortuosity and the relations between both of them are positive relationships with a fair to very high coefficient of correlation.     

Role of Welding Parameters Using the Flux Cored Arc Welding Process of Low Alloy Steels on Bead Geometry and Mechanical Properties

Welding parameters have direct effects on the bead geometry, microstructure, and mechanical properties of low alloy steels. A series of experiments have been carried out to examine some of these parameters using the flux cored arc welding process (FCAW). In this article, an experimental study was conducted to investigate the influence of welding parameters in FCAW process particularly welding voltage and travel speed on weld bead dimensions. The study also includes the effects of bead overlap and deposition sequence on the parent material and the heat-affected zone (HAZ) properties. It was found that an increase in the welding voltage leads to an increase in the weld bead width, and the increase in the welding traverse speed leads to a decrease in the weld bead width. When studying the bead overlap percentages, it was found that the 50% bead overlap can be considered to be practically a better option than the higher percentages of bead overlap (i.e., 70-90%). The experimental investigation of studying the deposition sequence showed that there were no significant differences in the microstructure, hardness, and the size of the refined HAZ between the two proposed deposition sequences. However, a significant improvement in the microstructure and the size of the refined HAZ, and a reduction in the hardness were achieved after depositing the second welding bead, irrespective of the depositing sequence.