Removal of Cu2+ and Pb2+ ions from aqueous solutions by starch-graft-acrylic acid/montmorillonite superabsorbent nanocomposite hydrogels

In this study, the removal of copper(II) and lead(II) ions from aqueous solutions by Starch-graft-acrylic acid/montmorillonite (S-g-AA/MMT) nanocomposite hydrogels was investigated. For this purpose, various factors affecting the removal of heavy metal ions, such as treatment time with the solution, initial pH of the solution, initial metal ion concentration, and MMT content were investigated. The metal ion removal capacities of copolymers increased with increasing pH, and pH 4 was found to be the optimal pH value for maximum metal removal capacity. Adsorption data of the nanocomposite hydrogels were modeled by the pseudo-second-order kinetic equation in order to investigate heavy metal ions adsorption mechanism. The observed affinity order in competitive removal of heavy metals was found Cu²⁺ > Pb²⁺. The Freundlich equations were used to fit the equilibrium isotherms. The Freundlich adsorption law was applicable to be adsorption of metal ions onto nanocomposite hydrogel.     

Efficient production of l-lactic acid from chicken feather protein hydrolysate and sugar beet molasses by the newly isolated Rhizopus oryzae TS-61

The aim of this study was to investigate production of l-lactic acid from molasses and chicken feather protein hydrolysate (CFP) by the newly isolated Rhizopus oryzae TS-61. R. oryzae TS-61 was capable of utilizing molasses sucrose and CFP as carbon and nitrogen sources, respectively. In contrast to yeast extract and ammonium sulfate, CFP had potential not only to prevent excessive pH changes and foaming but also to provide smaller uniform pellet formation in during fermentation. Thanks to these properties, it was concluded that CFP might have resulted in higher l-lactic acid production than the other two nitrogen sources (yeast extract and ammonium sulfate). At the end of 42-h optimal cultivation period, the highest (38.5 g/L) and lowest (28.8 g/L) concentrations of l-lactic acid were obtained with CFP and ammonium sulfate, respectively. This is the first report on use of waste chicken feather as a lactic acid production substrate. In addition, a new R. oryzae strain, being capable of using molasses sucrose as carbon source in order to produce l-lactic acid, was isolated.     

Evaluation of SeaWiFS chlorophyll‐a in the Black and Mediterranean Seas

The performance of NASA's OC2 and OC4 algorithms to estimate chlorophyll‐a concentrations from SeaWiFS radiometric measurements on the global scale was tested in two contrasted bio‐optical environments, the Black Sea and the Mediterranean Sea. The in situ bio‐optical measurements were made during October 1999 at 25 stations. Comparisons of the in situ measurements with the concurrent SeaWiFS retrievals indicate that the OC2 and OC4 algorithms are not working satisfactorily in both seas. Case 2 waters dominate the Black Sea and the failure of the algorithms is expected. On the other hand, failure of the algorithms in the case 1 waters of the Mediterranean Sea may be due to their specific optical properties. Modifying the OC4 algorithm to include SeaWiFS information at 412?nm yields a better performance in the Mediterranean Sea without degrading performance in the Black Sea. Combining a local algorithm adapted to oligotrophic waters of the Mediterranean Sea and OC4 provides the best results overall.     

Polyindene/organo‐montmorillonite conducting nanocomposites. I. Synthesis,characterization, and electrokinetic properties

In this study, Na‐montmorillonite was organically modified with cetyltrimethylammoniumbromide (CTAB) and intercalated with in‐situ polymerized indene. Polyindene(PIn)/Organo‐MMT nanocomposites were obtained with three different compositions and coded as: K1: [PIn(94.5%)/O‐MMT(5.5%)], K2: [PIn(92.8%)/O‐MMT(7.2%)], and K3: [PIn(87.9%)/O‐MMT(12.1%)]. These nanocomposites were subjected to full characterization with various techniques. Electrokinetic studies were conducted to reveal the zeta (ζ)‐potential characteristics of the nanocomposites. ζ‐potentials of the materials were observed to decrease with increasing O‐MMT content. The cationic (CTAB) and anionic (sodium dodecylsulfate) surfactants were shifted the ζ‐potentials of the colloidal dispersions to more positive and more negative regions, respectively whereas nonionic surfactant (Triton X‐100) caused almost no change. The pH and temperature were observed to shift the ζ‐potential values of the nanocomposites to more negative and slightly more positive regions, respectively. With the addition of mono (NaCl), di (BaCl₂) and three (AlCl₃) valent salts, the ζ‐potential of the nanocomposites were shifted to more negative, more positive, and much more positive regions, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effects of Different Treatments on the Inactivation of Various Seedborne Viruses in Some Vegetables

In this study, we considered the efficacy of seed treatments for the inactivation of some seedborne viruses in tomato, pepper, melon, squash, bean and lettuce seeds, which are essential for human nutrition and seed production in our country. A total of 325 seed samples obtained from various farmers and foundations were tested by DAS-ELISA and RT-PCR procedures. Eight seed lots infected with Tomato mosaic tobamovirus (ToMV), Tobacco mosaic tobamovirus (TMV), Cucumber mosaic cucumovirus (CMV), Soybean mosaic potyvirus (SMV) and Lettuce mosaic potyvirus (LMV) were selected as research materials. Virus inactivation treatments were made by using acetic acid (CH₃COOH), hydrogen peroxide (H₂O₂), hydrochloric acid (HCl), sodium hypochlorite (NaClO), Triton X 100, dry heat, heated water, ozone (O₃), and UV (305 nm wavelength). The most effective treatments for reducing virus concentration were HCl, heated water (65 °C) and ozone (10 g m^?3). These treatments reduced concentrations of seed-borne viruses in ranges of 51%, 42%, and 32%, respectively. Other treatments were less effective and reduced virus concentrations in the range of 27%–12%. HCl and ozone treatments were the most effective and applicable methods because they did not have negative effect on seed germination.     

Influence of sample size on strength distribution of advanced ceramics

Strength distribution of advanced ceramics is mostly characterized by Weibull distribution function. The question whether the Weibull distribution always gives the best fit to strength data has been being considered in the last years. The sample size affects the reliable decision of discrimination of different distribution functions (e.g. normal, log-normal, gamma or Weibull). In this paper, 5100 experimental alumina strength data and virtual strength data generated by Monte Carlo simulations are used in order to investigate the effect of sample size on strength distribution of advanced ceramics. It is suggested that, at least 150–200 samples should be used for determination of best fitting distribution function with a statistical fallibility of 10%. Extreme Value Analysis performed with the experimental strength data showed that the Weibull distribution fits the data best and difference between the Weibull and Gumbel distributions appear at the tails.     

Biological treatment of para-chlorophenol containing synthetic wastewater using rotating brush biofilm reactor

A novel rotating brush biofilm reactor (RBBR) was used for para-chlorophenol (4-chlorophenol, 4-CP), COD and toxicity removal from synthetic wastewater containing different concentrations of 4-CP. Effects of major operating variables such as the feed 4-CP and COD concentrations and A/Q (biofilm surface area/feed flow rate) ratio on the performance of the biofilm reactor were investigated. A Box-Wilson statistical experiment design method was used by considering the feed 4-CP (0-1000 mg l(-1)), COD (2000-6000 mg l(-1)) and A/Q ratio (73-293 m(2) day m(-3)) as the independent variables while the 4-CP, COD and toxicity removals were the objective functions. The results were correlated by a response function and the coefficients were determined by regression analysis. Percent 4-CP, COD and toxicity removals determined from the response functions were in good agreement with the experimental results. 4-CP, COD and toxicity removals increased with decreasing feed 4-CP and increasing A/Q ratio. Optimum conditions resulting in maximum COD, 4-CP and toxicity removals were found to be A/Q ratio of nearly 180 m(2) day m(-3), feed COD of nearly 4000 mg l(-1) and feed 4-CP of less than 205 mg l(-1).     

Sub-nanomolar sensing of ionic mercury with polymeric electrospun nanofibers

Ethyl cellulose (EC) based electrospun nanofibers were exploited for sub-nanomolar level optical chemical sensing of ionic mercury. An azomethine ionophore was used as Hg (I) and Hg (II) sensing material. Ethyl cellulose nanofibers with varying amounts of the ionic liquid; 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄) were prepared and characterized. The nanofibers were fabricated by electrospinning technique. The offered chemosensor allow determination of mercury ions in a large linear working range between 1.0 × 10⁻¹⁰ and 1.0 × 10⁻⁴ mol L⁻¹. Limit of detection was found to be 0.07 nM which makes this technique alternative to cold-vapor atomic absorption spectrometry (CV-AAS), flame emission methods and to inductively coupled plasma-mass spectrometry (ICP-MS).     

A new set of design aids for groups of four cylindrical silos due to interstice and internal loadings

The computation of design forces for reinforced concrete groups of four cylindrical silos requires significant computational effort due to continuity in the walls between adjacent silos. This paper presents a simple but accurate procedure for the computation of design forces acting on groups of four cylindrical silos due to stored materials. In this conjunction, finite element analyses were performed by using eight‐node solid elements for various groups of four cylindrical silos under interstice and internal loadings. The design forces at the prescribed sections of interstice and external walls were computed. The silo wall thicknesses, intersection wall thicknesses and intersection wall lengths of these grouped silos were varied with an extensive parametric study to demonstrate their influences on resultant design forces. Design formulas were proposed and dimensionless design coefficients were derived from the comprehensive series of finite element analyses considering the effect of continuity in the walls. The results were expressed in simplified form, so that the prediction of bending moments, axial forces and shear forces became straightforward for design purposes. In addition, the rigidity of the interstice walls was varied by changing the modulus of elasticity and the redistribution of design forces was investigated. Copyright © 2007 John Wiley & Sons, Ltd.     

Frictional Hertzian contact between a laterally graded elastic medium and a rigid circular stamp

This study investigates the problem of sliding frictional contact between a laterally graded elastic medium and a rigid circular stamp. Analytical and computational methods are developed to evaluate the contact stresses. In the analytical formulation, spatial variation in the shear modulus of the graded medium is represented by an exponential function, and Poisson’s ratio is taken as a constant. Coulomb’s dry friction law is assumed to hold within the contact area. The two-dimensional plane elasticity problem is formulated utilizing Fourier transforms, and the resulting Cauchy-type singular integral equation of the second type is solved by applying an expansion–collocation technique. The finite element method is used in the computational analysis of the contact problem. In the finite element model, continuous variation of the shear modulus is taken into account by specifying this property at the centroid of each finite element. The finite element-based solution procedure is verified by making comparisons to the results obtained through the analytical method. Numerical results generated for the laterally graded medium with an exponential variation in the shear modulus illustrate the influences of lateral gradation and coefficient of friction upon the contact stress distributions. The capability of the proposed finite element method is further demonstrated by providing numerical results for a laterally graded medium whose shear modulus is represented by a power function.