Numerical study on erosion of a pipe bend with a vortex chamber

Abrasive erosion at bend is a common issue in gas–solid pneumatic system. Vortex chamber design is one of the specialized designs that offers promising prospect at reducing erosion. The performance of design is still relatively unknown in the literature. The aim of this work is to study the effect of basic erosion variables such as the flow Reynolds number, the particle Stokes number, and the vortex chamber size. The results show that the vortex chamber always reduces the erosion in comparison to the common radius bend, and it is more effective at higher Reynolds number. Increasing the chamber size reduces the erosion but the most significant reduction happens when the chamber size to the pipe diameter ratio is increased from 1 to 1.25. The chamber size influences the erosion differently at different Reynolds number. Trends describing these effects were obtained through trial-and-error approach. The particle Stokes number has nonunique effect on erosion. Increasing Stokes number through increasing Re increases the erosion while increasing Stokes number through decreasing Re_p decreases the erosion.     

Food processing by high hydrostatic pressure

The use of high hydrostatic pressures (HHP) for food processing is finding increased application within the food industry. One of the advantages of this technology is that because it does not use heat, sensory, and nutritional attributes of the product remain virtually unaffected, thus yielding products with better quality than those processed traditional methods. HHP have the ability to inactivate microorganisms as well as enzymes responsible for shortening the life of a product. In addition to lengthening the shelf-life of food products, HHP can modify functional properties of components such as proteins, which in turn can lead to the development of new products. Equipment for large-scale production of HHP processed products are commercially available nowadays. Guacamole, sliced ham, oysters, and fruit juices are some of the products currently available on the market. HHP technology is one of the most promising nonthermal processes.     

2007年湘潭夏季高温干旱成因分析

通过对湘潭市2007年夏季气温、降水及大气环流背景等资料的统计分析, 得出造成湘潭市2007年高温干旱的原因:(1)气温明显偏高和降水异常偏少;(2)西太平洋副热带高压偏强偏西;(3)冷空气活动少制约着冷暖气流的交换;(4)台风和地形的作用也有一定影响.     

An experimental study on micro-EDM in low-resistivity deionized water using short voltage pulses

Deionized water has been used as dielectric fluid for micro-electrical discharge machining (micro-EDM) because it gives higher material removal rate and lower tool wear than hydrocarbon oil. Moreover, it is a relatively low-cost and eco-friendly substance. Therefore, deionized water tends to be more favorable for micro-EDM. However, it causes weak electrochemical reaction during micro-EDM due to its slight conductivity. This leads to the unanticipated additional material removal from the workpiece which affects the machining shape and quality. The study in this paper aims to suppress the electrochemical reaction in die-sinking micro-EDM using deionized water by employing short voltage pulse. Experiments were carried out to fabricate micro-holes using the developed nanosecond pulse circuit. Different pulse parameters were applied to identify the main factor affecting the electrochemical reaction rate. Machining gap was found to be thinner and workpiece surface adjacent to the rim of micro-holes were found to be free of defects caused by material dissolution when pulse duration reached a critical value. Moreover, the influence of pulse parameters on material removal rate and machined shape was also investigated. Besides, energy-dispersive X-ray spectroscopy analysis showed that the machined surface using deionized water was less affected from material migration during micro-EDM process in comparison to hydrocarbon oil.     

复合酶解法优化黄精多糖提取工艺

采用复合酶解法优化黄精多糖提取工艺,苯酚-浓硫酸显色法测定黄精多糖质量浓度,以黄精多糖提取率为指标,对复合酶种类和配比进行筛选后,在单因素试验基础上,考察酶解温度、pH、料液比、加酶量对提取率的影响,并通过正交试验进行优化。结果表明,复合酶提取优于单酶提取和普通水提。酶用量配比为纤维素酶:木瓜蛋白酶=3∶7。酶解最佳条件为:pH值5.0,酶解温度50℃,料液比(g/mL)1∶20,加酶量1.5 g/dL,即纤维素酶0.45 g/dL,木瓜蛋白酶1.05 g/dL,酶解2 h后,沸水浸提2 h。在此工艺条件下,黄精多糖提取率可达21.55%,是普通水提法得率的2.75倍,比单酶水解高出12.06%。     

Yttrium incorporation in Cr2AlC: On the metastable phase formation and decomposition of (Cr,Y)2AlC MAX phase thin films

Herein we report on the synthesis of a metastable (Cr,Y)₂AlC MAX phase solid solution by co-sputtering from a composite Cr–Al–C and elemental Y target, at room temperature, followed by annealing. However, direct high-temperature synthesis resulted in multiphase films, as evidenced by X-ray diffraction analyses, room-temperature depositions, followed by annealing to 760°C led to the formation of phase pure (Cr,Y)₂AlC by diffusion. Higher annealing temperatures caused a decomposition of the metastable phase into Cr₂AlC, Y₅Al₃, and Cr-carbides. In contrast to pure Cr₂AlC, the Y-containing phase crystallizes directly in the MAX phase structure instead of first forming a disordered solid solution. Furthermore, the crystallization temperature was shown to be Y-content dependent and was increased by ∼200°C for 5 at.% Y compared to Cr₂AlC. Calculations predicting the metastable phase formation of (Cr,Y)₂AlC and its decomposition are in excellent agreement with the experimental findings.     

RAFT-derived polymer-drug conjugates: poly(hydroxypropyl methacrylamide) (HPMA)-7-ethyl-10-hydroxycamptothecin (SN-38) conjugates

A series of well‐defined polymer–drug conjugates were prepared in order to modify the physical properties of a known cytotoxic drug, 7‐ethyl‐10‐hydroxycamptothecin (SN‐38), the active metabolite of irinotecan (CPT‐11). Reversible addition–fragmentation chain transfer (RAFT) polymerisation was used to covalently and site‐specifically append a defined N‐(2‐hydroxypropyl)methacrylamide (HPMA) polymer to SN‐38 using a graft‐from process. These poly‐HPMA–SN‐38 conjugates displayed excellent aqueous solubility and stability, whilst retaining the cytotoxic activity of the parent SN‐38. In vitro co‐culture assays containing both cancer and noncancer cell lines demonstrated the specificity of RAFT‐derived poly‐HPMA–SN‐38 conjugates for cancerous cells. The concept of post‐optimisation modification of small‐molecule drugs through a graft‐from polymer conjugation method is introduced.     

Structural and optical properties of ZnS thin films deposited by RF magnetron sputtering

Zinc sulfide [ZnS] thin films were deposited on glass substrates using radio frequency magnetron sputtering. The substrate temperature was varied in the range of 100°C to 400°C. The structural and optical properties of ZnS thin films were characterized with X-ray diffraction [XRD], field emission scanning electron microscopy [FESEM], energy dispersive analysis of X-rays and UV-visible transmission spectra. The XRD analyses indicate that ZnS films have zinc blende structures with (111) preferential orientation, whereas the diffraction patterns sharpen with the increase in substrate temperatures. The FESEM data also reveal that the films have nano-size grains with a grain size of approximately 69 nm. The films grown at 350°C exhibit a relatively high transmittance of 80% in the visible region, with an energy band gap of 3.79 eV. These results show that ZnS films are suitable for use as the buffer layer of the Cu(In, Ga)Se₂ solar cells.     

Freestanding fiber mats of zeolitic imidazolate framework 7 via one‐step,scalable electrospinning

We demonstrated the fabrication of freestanding zeolitic imidazolate framework 7 (ZIF‐7) nanofiber (NF) mats by means of one‐step, scalable electrospinning. The formation of ZIF‐7 nanoparticles embedded in polymer fibers was unambiguously pinpointed via X‐ray diffraction, transmission electron microscopy, and adsorption studies. The NF mats exhibited excellent characteristics, with an average diameter of 245 nm, in the adsorption and desorption of carbon dioxide (CO₂); this makes them attractive candidates for gas separation and other selective filtration applications. This excellent property of the ZIF‐7 mats was explained by the gate‐opening phenomenon of ZIF‐7, which yielded a stepwise increase in the overall CO₂ uptake capacity. The mechanical strength of the NF mats was also obtained via large‐strain uniaxial tensile deformation, which enabled preliminary assessment of the mat's suitability for textiles and membranes in targeting separation and filtration applications with large‐area permeability. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43788.     

Formation and Accumulation of Intragranular Pores in the Hydrothermally Synthesized Barium Titanate Nanoparticles

As highly integrated circuits are demanded for high‐performance electric devices, small sizes of barium titanate (BaTiO₃) as a dielectric material are desirable for the application of multilayer ceramic capacitors. Since the small sizes of the particles degrade the dielectric property, especially below a certain critical size, understanding the probable cause is significant for the high‐performance capacitors. Here, we have demonstrated nanosized BaTiO₃ with average size below 30 nm and a uniform size distribution. High‐resolution transmission electron microscopy (TEM) shows that the as‐synthesized BaTiO₃ contains intragranular pores. We have analyzed the correlation between the intragranular pores inside nanoparticles and their phase ratio of cubic and tetragonal. We have found that the presence of the intragranular pores affects low tetragonality of BaTiO₃ particles, and the intragranular pores are generated by the accumulation of hydroxyl groups during hydrothermal reaction. Formation and accumulation of intragranular pores have been investigated by ex‐situ synchrotron X‐ray diffraction and TEM analysis, suggesting the phase evolution model of nanosized BaTiO₃.