On the performance of heterogeneous MANETs

Recent decades have witnessed the birth of major applications of wireless communication technology, further supported by the increasing capabilities of portable devices, low cost and ubiquitous presence. Despite radio technology diversity, a great deal of existing research focuses on a single and isolated wireless technology at a time, where homogeneous elements are identified by IP addresses. This work presents a heterogeneous technology routing (HTR) Framework, targeted towards scenarios where the heterogeneity of devices and networking technologies is present. Our contribution is many fold. It consists of a framework, which encompasses a process for bootstrapping networks, a routing protocol capable of dealing with multiple network interfaces, and a tuning with multipath extensions. We evaluate the performance of the bootstrap, routing and multipath mechanisms by way of simulation and an actual testbed implementation. The multipath evaluation simulates HTR networks with WiMAX, 3GPP LTE and Wi-Fi support. Results show that our proposal can effectively improve the data delivery ratio for ad-hoc networks and that it reduces the end-to-end delay without major impact on network energy consumption. As part of HTR tuning, we investigate next the impacts of tuning the HELLO refresh interval timer on route convergence and its subsequent energy consumption reduction during this phase. We also compare our tuned HTR with the widely used optimized link state routing protocol. Results show that varying the HELLO refresh interval can improve the convergence time and reduce the energy consumption without major impact on network behavior. Our proposal also includes a new distributed address allocation algorithm, namely, the dynamic node configuration protocol (DNCP). This paper conducts a comparative analysis between the Prime, Prophet and the DNCP schemes using static and dynamic topologies in terms of network setup time, energy consumption and control message overhead. Results show that the DNCP had a lower battery power consumption and less control message overhead while it slightly suffers with regard to setup.

     

Problem of stress and strain concentration in the entry and exit planes in the drawing process

The paper discusses the problem of stress and strain concentration in the entry and exit planes during the drawing process. Earlier investigations carried out by Pierlin, Pawelski and Armstroff as well as Chen and Kobayashi's finite element analysis are reviewed. Authors’ calculations based on the rigid-plastic finite element approach are compared with experimental and theoretical results published by Pawelski and Armstroff. Solution for rigid-plastic material behaviour confirmed the die pressure increase in the entry and exit zones questioning Pierlin's suggestion that the elastic strains are responsible for pressure concentrations. Analysis of the strain rate distribution led to the presumption that pressure increase is due to the strain rate concentrations in the areas close to the entry and exit zones.     

Determination of optimal cream formulation from long-term stability investigation using a surface response modelling

The aim of this work was to apply an experimental design to formulate a stable depilatory cream at ambient temperature. A preliminary study was performed to optimize the most accurate operating parameters, which are then used for the determination of the rheological properties. Long-term stability of the emulsion formulations was investigated to obtain the optimal region of each factor. An experimental design using response surface modelling was then applied and emulsion stability was estimated by introducing new characteristic parameters correlated with the experimental results. An optimal region characterized with high stability was found and further explored to verify the effectiveness and tolerance of depilation. As part of the optimized process, the main effects of the formulation ingredients were also investigated.     

Numerical assessment of tunnel collapse: a case study of a tunnel at the East–West Algerian highway

Bulletin of Engineering Geology and the Environment - Construction of long tunnels in difficult sites is associated with various risks. Such risks are usually resulted on one hand from the lack of...     

Optimal maintenance plan for two-level assembly system and risk study of machine failure

This paper deals with the optimisation of two-levels assembly system planning. This system is composed of a single machine, inventories at levels 1 and 2 for stock keeping components to assembly and final assembled product. It assumed that the machine processes all assembly operations and is subject to random failure. A mathematical model is developed to incorporate a supply planning for two-level assembly systems under stochastic lead times and breakdowns machine. A preventive maintenance plan is carried out to reduce the frequency of the corrective maintenance actions. This work has double goals. The first one is to find the optimal order release dates for the different components at level 2 and the optimal preventive maintenance plan. The second one is to quantify the risk due to machine failures which have an impact on the lead-time of the finished product. To consider the maintenance actions, preventive maintenance actions are perfectly performed to restore the machine to state “as good as new”, minimal repair is considered at failure. The model minimises the total cost, which is the sum of inventory holding cost for components at levels 1 and 2, backlogging and inventory holding cost for the finished products and maintenance costs. To illustrate the effectiveness of the proposed model, different meta-heuristics are applied; the genetic algorithm shows the most suited to our analytical model, the optimal release date founded by this algorithm allows finding the optimal preventive maintenance plan. The obtained optimal maintenance planning is used in the risk assessment in order to find the threshold repair period that avoids lost profit.     

Study of Magnetic Entropy Change in Nd<Subscript>0.67</Subscript>Ba<Subscript>0.33</Subscript>Mn<Subscript>0.98</Subscript>Fe<Subscript>0.02</Subscript>O<Subscript>3</Subscript> by Means of Theoretical Models

Magnetic entropy change (?ΔS _M ) of Nd_0.67 Ba_0.33Mn_0.98Fe_0.02O₃ perovskite have been analyzed by means of theoretical models. An excellent agreement has been found between the (ΔS_M) values estimated by Landau theory and those obtained using the classical Maxwell relation. In order to estimate the spontaneous magnetization M _{s pont}(T), we used the mean-field theory to analyses the (ΔS_M) vs. M ² data. The obtained M _{s pont}(T) values are in good agreement with those found from the classical extrapolation from the Arrott plots(H/M vs. M ²), confirming that the magnetic entropy is a valid approach to estimate the spontaneous magnetization in our system. At a relatively low magnetic field, a phenomenological model has been used to estimate the values of the magnetic entropy change. The results are in good agreement with those obtained from the experimental data using Maxwell relation.     

Ligand‐Free Synthesis of Aluminum‐Doped Zinc Oxide Nanocrystals and their Use as Optical Spacers in Color‐Tuned Highly Efficient Organic Solar Cells

The color of polymer solar cells using an opaque electrode is given by the reflected light, which depends on the composition and thickness of each layer of the device. Metal‐oxide‐based optical spacers are intensively studied in polymer solar cells aiming to optimize the light absorption. However, the low conductivity of materials such as ZnO and TiO₂ limits the thickness of such optical spacers to tenths of nanometers. A novel synthesis route of cluster‐free Al‐doped ZnO (AZO) nanocrystals (NCs) is presented for solution processing of highly conductive layers without the need of temperature annealing, including thick optical spacers on top of polymer blends. The processing of 80 nm thick optical spacers based on AZO nanocrystal solutions on top of 200 nm thick polymer blend layer is demonstrated leading to improved photocurrent density of 17% compared to solar cells using standard active layers of 90 nm in combination with thin ZnO‐based optical spacers. These AZO NCs also open new opportunities for the processing of high‐efficiency color tuned solar cells. For the first time, it is shown that applying solution‐processed thick optical spacer with polymer blends of different thicknesses can process solar cells of similar efficiency over 7% but of different colors.     

Perturbation analysis for continuous and discrete flow models: a study of the delivery time impact on the optimal buffer level

In this paper, a manufacturing system composed of a single-product machine, a buffer and a stochastic demand is considered. Two models are presented: continuous and discrete flow models including constant delivery times, machine failures and random demands. The objective is to determine the value of the optimal buffer level, for a hedging point policy which minimises the total average cost function. The cost function is the sum of inventory, transportation and lost sales costs. Infinitesimal perturbation analysis is used for optimisation of the failure-prone manufacturing system. The trajectories of buffer level are studied for the continuous and discrete cases and the infinitesimal perturbation analysis estimators are evaluated. These estimators are shown to be unbiased and then they are implemented in an optimisation algorithm which determines the optimal buffer level in the presence of constant delivery time. Numerical results are presented for continuous and discrete flow models and then compared in order to evaluate the application of the infinitesimal perturbation analysis on the discrete flow model.     

Bacteriological effects of functionalized cotton dressings

This study aims to achieve effects of improved hydrophilicity and microorganism inhibition, which are rarely simultaneously present in wound dressings. Cotton gauzes were modified using the grafting of a polymer-based β-cyclodextrin. After optimizing the grafting conditions, the untreated and modified cellulosic samples were principally characterized using FT-IR spectroscopy, TGA/DTA analysis, in vitro drug release, and wettability measurements. In light of desired characteristics of wound dressings, the effectiveness of procedures was evaluated. It was found that contact angles for cotton gauzes decreased after functionalization, which means that hydrophilicity was proven to become excellent. A successful Methylene Blue complexation was confirmed through measure of the dyebath exhaustion using UV-spectrophotometry. Then, during Methylen Blue release test, we reported an initial burst release of active ingredient over 7?h, followed by zero-order release. The treatment effect on antimicrobial activity was investigated by growth inhibition, which was proven against Staphylococcus aureus and Escherichia coli.