Development of a Four-Channel Potentiostat for Amperometric Detection in Flow Injection Analysis

Abstract

A four-channel multipotentiostat has been developed for simultaneous voltammetric measurements with microelectrode arrays. To reduce the complexity of electrochemical cell, only one reference and one auxiliary electrode are used. The potential ranges of the four working electrodes may be independently controlled, but they are synchronously scanned by only one DAC. This is accomplished through a microcomputer interfaced with a PCL-711B data acquisition board, which allows the continuous monitoring of the currents and actual potentials of the working electrodes.

The system has been applied to the simultaneous determination of ascorbic and uric acids in synthetic samples. The measurements were carried out with gold microelectrodes modified by deposition of noble metals, which enhance the electrocatalysis and provide an anticipation and a better definition of the oxidation potentials. Recuperation of 98.2% and 97.8% for ascorbic and uric acids, respectively, was obtained by using amperometry.     

Thermodynamic Evaluation of the Phase Stability and Microstructural Characterization of a Cast B1914 Superalloy

The boron-carbon superalloys (BC alloys) were developed to reduce the carbon content of the alloys to less than 0.02 wt.% and increase the boron content to 0.1 wt.% in some Ni-based superalloys. In this study, we have used characterization techniques, such as DTA, XRD, SEM coupling, and thermodynamic calculation using Thermo-Calc software, to obtain information about the phase transformation reaction temperatures and the elemental compositions of the microstructural constituents encountered in the B1914 superalloy. The microstructure of the B1914 superalloy was composed of a gamma (γ) phase with a dendritic structure and gamma prime (γ′) phase with a cuboidal shape. Precipitates of γ′ and a lamellar eutectic, composed of γ/(Mo,Cr,Ni)₃B₂, were identified in the interdendritic region. The thermodynamic calculation results have shown to be a valuable tool for predicting the transformation temperature, such as liquidus, γ’ solvus, and incipient melting point. These transformations are important parameters used in casting simulation software for determining the heat treatment and welding repair conditions for parts made from this alloy.     

An approach to textile dye removal using sawdust from Aspidosperma polyneuron

The textile industry is responsible for discarding wastewater contaminated with dyes. The timber industry generates waste in the form of sawdust. The aim of the present study was to evaluate the adsorptive potential of sawdust obtained from the Aspidosperma polyneuron tree for the removal of the textile dye from wastewater. Sawdust was subjected to different pre-treatments (acid, alkaline and polyethyleneimine) in order to increase its adsorption capacity. Based on the results from the isotherms, treatment with polyethyleneimine (PEI) led to the greatest adsorption capacity and fits the Freundlich model, indicating cooperative adsorption. Other treatments with sawdust best fit the Langmuir model, but the untreated sawdust presented better results than the treated sawdust. These results were only surpassed by sawdust treated with PEI. A. polyneuron revealed good potential for use as an adsorbent to remove dyes, which is a novel result, since to date there is no study on its use as a sorbent material.     

Predicting odour emissions from wastewater treatment plants by means of odour emission factors

In this study, the results of odour concentration measurements on different wastewater treatment plants are presented and used in order to estimate the odour emission factors relevant to single odour sources. An odour emission factor is a representative value that relates the quantity of odour released to the atmosphere to a specific activity index, which in this case was the plant treatment capacity, resulting in an odour emission factor expressed in odour units per cubic metre of treated sewage. The results show that the major odour source of a wastewater treatment plant is represented by the primary sedimentation (with an OEF equal to 1.9 × 10⁵ ou_E m⁻³). In general, the highest OEFs are observed in correspondence of the first steps of the wastewater depuration cycle (OEF between 1.1 × 10⁴ ou_E m⁻³ and 1.9 × 10⁵ ou_E m⁻³) and tend to decrease along the depuration process (OEF between 7.4 × 10³ ou_E m⁻³ and 4.3 × 10⁴ ou_E m⁻³). In general, the OEFs calculated according to this approach represent a model for a rough prediction of odour emissions independently from the specific characteristics of the different plants.     

A Novel Function of the Triterpene Squalene in a Tritrophic System

Changes in apple leaf chemistry after infestation by leafminers and their effect on both host location and host habitat location of the generalist parasitoid Pholetesor bicolor were investigated. Chemical analysis of leaf solvent extracts from healthy and leafminer-damaged leaves revealed that herbivory increased the amount of the triterpene squalene (C₃₀H₅₀), whereas quantities of all other identified compounds were similar in both plant treatments. To assess the response of parasitoids to host location cues, contact bioassays were conducted with naïve females. Results showed that parasitoids performed a characteristic ovipositional probing more often on the mine-damaged than on the healthy leaf. This behavior was triggered by a hexane extract of the mine-damaged leaf, but not by a healthy leaf extract. A synthetic mixture of the compounds identified in the extract triggered a similar response. A mixture devoid of squalene was not active, whereas squalene alone elicited the probing behavior. To assess the use of the identified compounds in habitat location, Y-tube olfactometer experiments were conducted with naïve and experienced females. Results showed that squalene is not involved in habitat location and has no priming effect on P. bicolor. While other triterpenes are known to mediate habitat location of parasitoids, this is the first report in which a plant triterpene is shown to mediate host location of a parasitoid. The biological and ecological functions of squalene on all three trophic levels are discussed.     

Brazilian scientific production in science education

In the present study we analyzed the Brazilian scientific production in the area of science education. The study was structured on: data by research groups registered in Conselho Nacional de Desenvolvimento Científico e Tecnológico; analysis of the post-graduate strictu sensu programs; analysis of theses and dissertations linked to post-graduate programs; and papers in international databases. Our research was conducted strictly via world wide web, from December 2009 to September 2010. It was found that both number of research groups, researchers, post-graduate programs, thesis, dissertations and papers presented a marked increase, especially in the last decade (from 2000 onwards). The major research centers were found to be located in public universities from Brazilian southeast and south regions. However, it was observed a tendency of decentralization, due to a recent investment in new public universities in the other Brazilian regions. So, this study sought to present an overview of the scientific production about science education and we expect that this information can help to expand the vision about the development of this research area in Brazil.     

Experimental investigation and numerical modeling of carbonation process in reinforced concrete structures: Part I: Theoretical formulation

In this work, the mathematical-numerical model of carbonation process in reinforced concrete (RC) structures, which has been developed by the authors, is applied to different cases of study to take into account the probabilistic nature of durability assessment procedure even if within the framework of a rough and ready approach. In particular, the aim of this Part I of the work is to study how the variability of the parameters defining the differential equations in the model influence the assessment of the corrosion initiation time of RC structure. Comparison with experimental results and numerical simulations are undertaken in Part II of this work.     

Characterization of Crude Watermelon Seed Oil by Two Different Extractions Methods

The aim of this paper was to study the physical–chemical composition of the watermelon seed oil extracted by a mechanical process using an expeller and by a chemical process using hexane as the solvent. The watermelon seed oil had a high concentration of unsaturated fatty acids. The two primary sterols were stigmasterol and β-sitosterol, which corresponded to approximately 47 and 30% of the total phytosterols. The oil had a low tocopherol content (65.19 mg/kg for S and 73.19 mg/kg for E). Comparing the two extraction methods, extraction by expeller produced an oil of superior quality with respect to oxidative stability, carotenoids and Lovibond color. No significant differences were found between the two extraction methods with respect to the minor components of the oil considered as functional, such as phytosterols.