DARYN-a distributed decision-making algorithm for railway networks:modeling and simulation

The state of the art in scheduling “point-to-point” trains in a railway network utilizes the principles of centralized decision-making. The major difficulty of this approach is that the execution time and the memory requirements increase nonlinearly as the system grows in size. The present paper introduces a new approach, “DARYN”, wherein the overall decision process is analyzed and distributed onto every natural entity of the system. In DARYN, the decision process for every train is executed by an on-board processor that negotiates, dynamically and progressively, for temporary ownership of the tracks with the respective station controlling the tracks, through explicit processor to processor communication primitives. This processor then computes its own route utilizing the results of its negotiation, its knowledge of the track layout of the entire system, and its evaluation of the cost function. Every station's decision process is also executed by a dedicated processor that, in addition, maintains absolute control over a given set of tracks and participates in the negotiation with the trains. Presently, DARYN utilizes a simple cost function. However, if one chooses to increase the complexity of the cost function, DARYN's advantage over the traditional approach increases due to its enormous available computational power. Given that the current microprocessors such as MC68030, MC88000, Intel 486, and Intel 860 are powerful yet relatively inexpensive, a network of concurrently executing processors may offer superior price-performance quotient over a single high performance computer     

PSoC-based embedded design and quartz tuning fork for low-temperature measurement system design

This article describes a commercial quartz tuning fork (QTF), 8 mm in height by 3 mm in diameter, holding a two-terminal electronic component with a nominal frequency of 32.768 kHz and 12.5 pF typical load capacitance packed in a vacuum-sealed metal container, which has been used as a sensor for low-temperature measurement with good sensitivity, repeatability, and reliability. An embedded readout design with the support of a programmable system on-chip (PSoC) and virtual instrument control program, which uses a personal computer as an input/output device, provides online data acquisition of the QTF frequency data, which will in turn provide the measurement of the low-temperature bath in which the QTF is immersed. The embedded PSoC readout captures the varying frequency signals from the QTF as a response to the measurement temperature, processes it, and sends the frequency value to a personal computer, where LabVIEW, a graphical language ("G" language), displays the data in a graphical format. The QTFs for low temperature (300 K to 77 K) are well studied, whereas a sensor using a PSoC embedded design as a readout is a novel design implementation.     

Eddy current probe sensitivity as a function of coil construction parameters

We report the results of the first phase of a study designed to quantify the relationship between eddy current coil construction and the performance of these coils used in nondestructive evaluation (NDE) inspections. The ferrite core coils wound for this study are small but typical of the sizes commonly used in commercially manufactured eddy current probes. Coil diameters range from 1 mm to 7 mm with lengths from 0.5 mm to 4 mm. Seven parameters were studied and included ferrite diameter, ferrite permeability, coil aspect ratio, number of turns, distance of the windings from the inspection end of the ferrite, wire gauge, and length of the ferrite beyond the end of the windings. Additionally, the coil set was designed to provide some indication of the repeatability of identical constructions, what we have called winding inhomogeneity. The coils were incorporated into surface probes for scanning defects in flat plate specimens. The measure of sensitivity was the change of probe impedance (Z) as the probe was scanned from an unflawed area to the flawed area of the test specimen. Measurements were also made of the component of Z perpendicular to the liftoff vector.The data reported here were produced from a set of 27 probes scanned over a single defect. The defect was an electrical-discharge-machined (EDM) notch in a 19 mm thick 7075-T6 aluminum alloy specimen. The part-circular EDM notch was 9 mm long and 3 mm deep and 0.1 mm wide.Analysis of the data shows that the number of turns, the winding distance, the coil aspect ratio, and the backside ferrite length all affect the coil sensitivity. Winding inhomogeneity is significant for coils having many winding layers and can be considerably larger than the contribution made by variations in some of the construction factors. Wire gauge, ferrite diameter, and permeability showed no significant effects on our measure of sensitivity in this study.     

Short‐beam three‐point bend test study in syntactic foam. Part III: Effects of interface modification on strength and fractographic features

Syntactic foam slabs having uncoated microballoons and paraffin oil surface‐treated microballoons were fabricated and tested for short‐beam three‐point bend test. The work points to the role of paraffin oil coating first weakening the interface between the microballoons and the matrix and hence lowering the efficiency of load transfer from matrix to the fillers (i.e., microballoons). This led to an overall decrement of 71% in the experimentally measured strength value compared to the deduced value for uncoated microballoons' specimens. The large strengths for uncoated microballoons specimens can be traced to the presence of the curvilinear marks in the matrix that, incidentally, are absent in the case of paraffin oil coated specimens. These observations are revealed distinctly in the microscopy of test‐failed specimens. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 687–693, 2005     

State of the academic field of IS in India

The field of information systems (IS) remains ill-defined, facing problems of recognition and identity crisis. Several papers and debates have been dedicated on this topic for over three decades. The focus of these debates have largely centered on the state of the IS field in Americas and Europe and with a limited study conducted in the Asia–Pacific context. This study attempts to assess the field in the Indian context and highlight the challenges and issues faced by IS faculties in India. Based on literature survey of the seminal papers in the field, we identified the salient topics of interest to IS researchers: identity of the IS field; diversity of the field; research approaches, methods and rigor; reference disciplines; journals and conferences; and IS course and curriculum. A two-phase study was carried out to explore the interest generated by the IS field in India. In the first phase, secondary data review of leading business schools in India was carried out to understand their focus on IS as an academic discipline. In the second phase, we conducted interviews of IS researchers from the premium business schools in India. In our study, we analyze the research focus of IS faculties in B-schools in India, analyze the composition of the faculty pool and the nature of research work undertaken by them. Our study points at the restricted focus of IS researchers in India around a few narrow areas, with a significant breadth of topics not being explored for research. We found the identity struggle of the field to be prominent, which was further compounded by the limited number of active, IS researchers. The growing importance of qualitative techniques in IS research, the challenges of developing a sound base in multiple reference disciplines and the need for making IS course interesting for business school students were some of the other significant observations. Our study also highlighted the paradox of the success of the IT industry in India leading to reduced enrollment of IS courses in B-Schools. We conclude by providing recommendations to B-school deans and directors.     

Preparation of high-purity antimony by electrodeposition

Detailed studies were carried out on the electrowinning of antimony from SbCl₃–HCl–H₂SO₄ and SbCl₃–HCl baths using a graphite anode and a tantalum cathode, the anode being enclosed in a cylindrical glass compartment provided with a sintered disc. Disintegration of the graphite anode increased with increase in anode current density and duration of electrolysis. Analysis of gas evolved at the anode indicated that the presence of sulphuric acid increased the production of CO₂. The anodic disintegration was reduced to a negligibly low value by circulation of 6m HCl through the anode compartment. Optimum conditions were determined for electrowinning of antimony from a SbCl₃–HCl bath. The tantalum content in the metal was 0.1–0.2 p.p.m.     

High-Temperature Structural Phase Transition in Ca0.7Ti0.7La0.3Al0.3O3: Investigation by Synchrotron X-Ray Diffraction

Mixed-oxide prepared Ca_0.7Ti_0.7La_0.3Al_0.3O₃ (CTLA) ceramics (≈96% dense), grain size 6–7 μm, with dielectric properties (at 4 GHz) of ɛ_r≈46, Q × f ≈38 000 GHz, and τ_f+13 ppm/°C, were studied at 25°–1300°C using synchrotron X-ray powder diffraction. At room temperature, CTLA exhibits a distorted orthorhombic structure, with two tilt systems: a =5.40383 (4) Å, b =5.41106 (6) Å, and c =7.64114 (7) Å with space group Pbnm . At 1050°±25°C, there is a transition from orthorhombic ( Pbnm ) to tetragonal ( I 4/ mcm ), with a simpler tilt arrangement. The lattice parameters at 1100°C were: a =5.44285 (4) Å and c =7.68913 (8) Å.     

Self-assembly of C60 containing poly(methyl methacrylate) in ethyl acetate/decalin mixtures solvent

[60]Fullerene (C₆₀) was mono-substituted with well-defined poly(methyl methacrylate) (PMMA-b-C₆₀) using the atom transfer radical polymerization (ATRP) technique. The self-assembly behaviors of PMMA-b-C₆₀ in ethyl acetate (EA) and decalin mixtures were studied using laser light scattering (LLS) and transmission electron microscopy (TEM). Homogeneous solutions of PMMA-b-C₆₀ can be obtained in the solvent mixtures containing more than 40 wt% EA, where the molar ratio of decalin to EA is close to 1. For each solvent mixture, unimers coexist with micelles and large aggregates. The sizes of PMMA-b-C₆₀ micelles and aggregates are independent of polymer concentration, confirming that they are produced via the closed association mechanism. For the various solvent mixtures, the weight-averaged molecular weights, M_w of the PMMA-b-C₆₀ aggregates range from 4.1×10⁷ to 12.5×10⁷ g/mol. The hydrodynamic radii of the large aggregate, R_h, vary from 90 to 136 nm, while the z-averaged radii of gyration, R_g, range from 210 to 311 nm. The R_g/R_h value for each solvent mixture is ∼2.3, which is independent of decalin contents in the mixed solvents. The morphological study using the transmission electron microscope suggests that the large aggregates are composed of porous large compound micelles (LCM) in solution.