Oxygen permeation of various archetypes of oxygen membranes based on BSCF

Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3‐δ tubes, capillaries, capillary modules, and asymmetric membranes were prepared and tested for oxygen permeation in a dead‐end vacuum operation mode at temperatures up to 850^°C. The capillary module was built up by reactive air brazing using seven capillaries and a supply tube. Two machined discs were used as an end cap and as a connector plate. The oxygen permeation behaves according to Wagner at small driving forces, but significant negative deviations were observed for asymmetric membranes and single capillaries at higher ones. This is caused by pressure drops at the vacuum side for single capillaries. The highest oxygen flux was revealed for the capillary module with 175.5 mL(STP)/min at a low‐vacuum pressure of 0.042 bar at 850^°C, but the asymmetric membrane showing a little bit higher flux at moderate vacuum pressures above 0.07 bar. © 2012 American Institute of Chemical Engineers AIChE J, 58: 3195–3202, 2012     

Dependency solving: A separate concern in component evolution management

Maintenance of component-based software platforms often has to face rapid evolution of software components. Component dependencies, conflicts, and package managers with dependency solving capabilities are the key ingredients of prevalent software maintenance technologies that have been proposed to keep software installations synchronized with evolving component repositories. We review state-of-the-art package managers and their ability to keep up with evolution at the current growth rate of popular component-based platforms, and conclude that their dependency solving abilities are not up to the task.We show that the complexity of the underlying upgrade planning problem is NP-complete even for seemingly simple component models, and argue that the principal source of complexity lies in multiple available versions of components. We then discuss the need of expressive languages for user preferences, which makes the problem even more challenging.We propose to establish dependency solving as a separate concern from other upgrade aspects, and present CUDF as a formalism to describe upgrade scenarios. By analyzing the result of an international dependency solving competition, we provide evidence that the proposed approach is viable.     

A new colorimetric assay for antioxidant capacity and photostability

The antioxidant capacity of cysteine, glutathione, N‐acetylcysteine, and ascorbic acid to reduce Methylene Blue to colourless Leucomethylene Blue was analysed. Interestingly, transient exposure of Leucomethylene Blue to sunlight resulted in a reversible oxidation reaction and thus, provided a fast, easy, and simple quantitative assay to determine antioxidant capacity and photostability of biologically relevant antioxidants.     

Identification and Structure–Activity Relationship Studies of Small‐Molecule Inhibitors of the Methyllysine Reader Protein Spindlin1

The methyllysine reader protein Spindlin1 has been implicated in the tumorigenesis of several types of cancer and may be an attractive novel therapeutic target. Small‐molecule inhibitors of Spindlin1 should be valuable as chemical probes as well as potential new therapeutics. We applied an iterative virtual screening campaign, encompassing structure‐ and ligand‐based approaches, to identify potential Spindlin1 inhibitors from databases of commercially available compounds. Our in silico studies coupled with in vitro testing were successful in identifying novel Spindlin1 inhibitors. Several 4‐aminoquinazoline and quinazolinethione derivatives were among the active hit compounds, which indicated that these scaffolds represent promising lead structures for the development of Spindlin1 inhibitors. Subsequent lead optimization studies were hence carried out, and numerous derivatives of both lead scaffolds were synthesized. This resulted in the discovery of novel inhibitors of Spindlin1 and helped explore the structure–activity relationships of these inhibitor series.     

Imide‐containing ladder polyphenylsilsesquioxanes with high thermal stability and thermoplastic properties

This work reports for the first time the synthesis of ladder polyphenylsilsesquioxanes containing imide building blocks as parts of the main parallel chains. The ladder structure of the synthesized polymers was documented by means of small angle X‐ray scattering (SAXS) measurements. The obtained ladder polymers exhibit stability with respect to decomposition up to temperatures as high as 460°C; additionally, they have melting points far below their decomposition temperatures, which make them interesting candidate materials for thermoplastic processing. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40085.     

Blended Learning – ein innovatives Weiterbildungskonzept für die Technische Chemie

The ever‐increasing and ever‐changing challenges of the job market require professionals to constantly attend extra occupational education programs. Professionals furthermore express their desire for a compatibility of family and work. Therefore, a general concept for extended vocational training in the field of natural science and technology was developed based on blended learning. As an example, the concept was implemented and tested on the basis of the extended vocational training course “tc‐compact^BL” in Chemical Technology.     

在机床研发中基于职能单位的产品开发理论与实践

通过调查得知,包括虚拟现实技术在机床制造中应用可能性的应用方法、策略和工具在产品开发中的现状.对调查结果进行了讨论,考虑到研究理论的可移植性和对企业内部实战的依赖性.讨论的结果为基础研究领域的命题"基于职能单位的产品开发"提供结论.     

Polysilazane derived micro/nano Si3N4/SiC composites

The pyrolised polysilazanes poly(hydridomethyl)silazane NCP 200 and poly(urea)silazane CERASET derived Si–C–N amorphous powders were used for preparation of micro/nano Si₃N₄/SiC composites by hot pressing. Y₂O₃–Al₂O₃ and Y₂O₃–Yb₂O₃ were used, as sintering aids. The resulting ceramic composites of all compositions were dense and polycrystalline with fine microstructure of average grain size <1 μm of both Si₃N₄ and SiC phases. The fine SiC nano-inclusions were identified within the Si₃N₄ micrograins. Phase composition of both composites consist of , β modifications of Si₃N₄ and SiC. High weight loss was observed during the hot pressing cycle, 12 and 19 wt.% for NCP 200 and CERASET precursors, respectively. The fracture toughness of both nanocomposites (NCP 2000 and CERASET derived) was not different. Indentation method measured values are from 5 to 6 MPa m^1/2, with respect to the sintering additive system. Fracture toughness is slightly sensitive to the SiC content of the nanocomposite. Hardness increases with the content of SiC in the nanocomposite. The highest hardness was achieved for pyrolysed CERASET precursor with 2 wt.% Y₂O₃ and 6 wt.% Yb₂O₃, HV 23 GPa. This is a consequence of the highest SiC content as well as the chemical composition of additives.