The use of generalised models to explain the behaviour of ohmic contacts to n-type GaAs

The use of two generalised carrier transport models to account for the N_D⁻¹ dependence of the specific contact resistance (ρ_c) of metal-semiconductor Ohmic contacts to n-type GaAs is proposed. Both models include the effects of thermionic emission and diffusion across the high-low barrier junction a priori. Calculations of ρ_c, and comparison with experimental data, show conclusively that thermionic emission is the dominant transport mechanism across the barrier. It is stressed that these models do not rely on prior choices of either of the transport processes. These conclusions are arrived at a posteriori.     

Investigation of iron oxide reduction by TEM

An “environmental cell” located in a high voltage transmission electron microscope has been used to study the reduction of single crystal iron oxides by hydrogen and hydrogen-argon mixtures. The cell enables a direct observation of the solid during reaction, thus permitting the nucleation and growth of solid reaction products to be observed. Hematite was reduced at temperatures in the range 387 to 610°C with gas pressures up to 5.3 kP. Reduction with pure hydrogen was considerably faster than when argon was present. Lath magnetite which rapidly transforms to porous magnetite and thence (more slowly) to porous iron was observed. The reduction of magnetite and of wustite single crystals was observed in the temperature range 300 to 514°C using both hydrogen and hydrogen-argon mixtures at gas pressures up to 6.6 kP. Incubation periods were found for magnetite reduction; during these periods faceted pits formed in the oxide. Iron formed in the early stages was epitaxial with the host magnetite; at later stages the epitaxy was lost and fissures frequently formed in the metal. The morphology of the iron differed between the gas mixtures. Disproportionation accompanied the reduction of wustite, producing intermediate polycrystalline magnetite despite reducing conditions. The disproportionation appeared to be promoted by the reduction reaction. For both oxides, reduction in the hydrogen-argon mixture was slower than in pure hydrogen.     

Application of a Neuroelectric Model to Electrocutaneous Sensory Sensitivity: Parameter Variation Study

A previous publication discussed results from a neuro-electric model for analyzing excitation of myelinated nerve by external electrical stimuli. The studied model is an adaptation of the one developed by McNeal. The present paper examines how membrane and geometric parameter variations affect electrical sensitivity calculated with the model.     

Efficacy of morantel tartrate in a sustained release bolus on the control of subclinical gastrointestinal parasitism in first-year grazing dairy replacements

Thirty-four heifers (24 Holstein, 8 Ayrshire, 2 Jersey) and 12 Holstein steer calves were grouped into 23 blocks of 2 animals each according to breed, sex, and body weight. Animals in each block were randomly assigned to control or treated groups. The treated group received an anthelmintic bolus containing morantel tartrate before they were permitted access to pasture. A 2.6 ha pasture was divided in half with a double fence; the resulting two pastures had separate feed and water troughs. Steer calves were slaughtered upon termination of the trial to ascertain gastrointestinal parasite burdens. Two worm-free tracer calves were placed on each pasture every 2 mo and slaughtered after 4 wk of grazing to determine parasite infectivity of pastures. Herbage samples were obtained monthly and analyzed for infective larvae. The trial was conducted for 141 d during the grazing season. Treatment resulted in 90% reduction in infective larvae on pasture, 74% reduction in fecal worm-eggs, 91% reduction in adult worm burdens, and a trend toward reduced worm burdens in tracer calves by 52%. An overall average daily gain of .68 and .88 kg was obtained for control and treated animals. Reproductive data for the heifers remaining in the herd from the trial showed that treatment resulted in 44 less days to first breeding.     

The Determination of the Level of Bicarbonate, Carbonate, or Carbon Dioxide in Aqueous Solutions

A rapid and convenient method for the measurement of bicarbonate, carbonate, or carbon dioxide in water was developed using fourier transform infrared spectroscopy (FTIR). Bicarbonate and carbonate are converted to carbon dioxide by lowering the pH of the solution, then the absorbance of the dissolved carbon dioxide at 2345 wavenumbers is measured using a liquid sample cell. If the measurement of dissolved carbon dioxide is the objective, the pH is not adjusted, and the carbon dioxide in the free form can be measured without interference from low levels of carbonates. The method is linear from 10.48 ppm to a minimum of 366.8 ppm carbon dioxide (r squared = 0.9996). The coefficient of variation at 10.48 ppm (LOD 3 signal/noise), 52.4 ppm, and 262 ppm is 45.6, 4.0, and 3.9, respectively. The average percent recovery at 10.48 ppm, 52.4 ppm, and 262 ppm is 74.5, 104.2, and 104.0, respectively.     

Effects of fluoropolymer addition to an epoxy on scratch depth and recovery

Samples were prepared by addition of a fluorinated poly(aryl ether ketone) (12F-PEK) to a commercial epoxy resin and curing at either 24 °C or 70 °C. The concentrations of fluoropolymer in the samples were 0, 5, 10, 20, 30, 40, and 50%. Phase inversion facilitates the formation of more and more smooth surfaces for scratch testing with increasing fluoropolymer concentration. A progressively increasing load from 0.03 N to 12 N was administered with a diamond tip to the surfaces of the samples; depths were determined within ±7.5 nm. The original scratch depth is a function of the fluoropolymer concentration. Scratch recovery (healing) reaches values up to 95%. Plots of the residual depth versus concentration of the fluoropolymer at 4, 6, 8, and 10 N reveal minima for all forces and both temperatures. Addition of only 5% or 10% 12F-PEK improves the scratch recovery significantly. The results are explained by changes of material morphology with the fluoropolymer concentration. Electronic Publication     

Significance of serum beta-hCG as a tumor marker for stomach carcinoma

We performed BAEP study to evaluate acoustic nerve involvement in 102 patients affected by peripheral neuropathies of different etiology, predominantly hereditary and inflammatory acquired neuropathies. Prolonged latency of early waves, indicative of slowing in VIII nerve conduction, was found in a high percentage of cases. Abnormalities were far more frequent (44% vs 14%) and severe in patients with demyelinating rather than axonal neuropathy. Among demyelinating neuropathy, the most severe latency delay was found in Hereditary Motor and Sensory Neuropathy type III. The pattern of acoustic nerve involvement differed slightly between Hereditary Motor and Sensory Neuropathy type I and acquired inflammatory demyelinating polyradiculoneuropathy, perhaps reflecting different pathogenetic mechanisms and different sites of VIII nerve demyelination.     

Volatile constituents of palm wine and palm sap

Palm wine and pasteurised palm sap volatiles were collected, concentrated on a Tenax GC and analysed by gas chromatography and gas chromatography-mass spectrometry. Eighty-two components were identified: 47 esters, 9 alcohols, 5 acids, 6 carbonyls, 2 acetals, 4 terpenes and 9 hydrocarbons. These had all been found previously in conventional wines. Odour evaluation of the separated palm wine components as they eluted suggested that no one compound is responsible for the characteristic palm wine odour. The acetates of higher alcohols and the ethyl esters of straight-chain aliphatic C₆-C₁₀ acids seemed to be important and may play a big role in imparting the fruity nuances of characteristic palm wine odour. Their association with alcohols seemed also to be necessary for the expression of typical palm wine odour. The qualitative difference between palm sap aroma and palm wine aroma appeared to be due mainly to the presence of these esters and alcohols in palm wine and their apparent absence from palm sap, as well as to the presence of some low-boiling esters and alcohols in palm sap and their apparent absence from palm wine.     

A new ‘tailor-made’ methodology for the mechanical behaviour analysis of rubber-like materials: I. Kinematics measurements using a digital speckle extensometry

This paper is the first part of a work devoted to the setting-up of a methodology for the mechanical behaviour characterization of rubber-like materials, using a digital speckle extensometer. We present here the experimental approach, specific to large strain measurements. The proposed method is based on in-plane kinematics measurements using an optical extensometer. The whole two-dimensional field of in-plane displacements is obtained by a digital image processing. We discuss then the correlation calculations and how to achieve the optimal subset matching. Next, we specify how to derive the principal stretch ratios, and the accuracy on these components, issued from a subsequent numerical calibration.Finally, we present experimental data dealing with a carbon black, filled natural rubber, issued from uniaxial traction tests, pure shear tests, and tensile tests performed on double-edge notched tensile specimens.