电动机械取心钻具反扭装置实验台设计及实验

Anti-torque device with high torque is one of the main parts of the electromechanical coring tools of armored cable type for sub-glacial bedrock drilling, the failure of this device will cause the drilling process ceasing, even will lead to the drill falling off and other drilling accidents. The experimental stand of anti-torque device for armored cable assembly is designed; the paper introduces in detail the design concept, design principle, main structure parameters and the preliminary experimental results. This experimental stand can test the anti-torque of the anti-torque device in any combination with ice of different temperature and borehole of different diameter, and can show the sliding down resistance. The preliminary experiments verify that the experimental stand works well, and it can provide an important basis for the better selection of anti-torque device type and optimal operation parameters.     

MoO2 Diffusion in Aluminosilicate Glass

A diffusion couple of an oxidized molybdenum disk and a glass cylinder was used to measure the solubiiity and effective binary diffusion coefficient of MoO₂ in a non-alkali aluminosilicate glass. At 1400°C, the solubility limit was 8.4 mol%; the value of the diffusion coefficient (4.1 × 10⁻¹⁶ m²/s) was significantly lower than that estimated from the Stokes-Einstein relation.     

Glass–Ceramic Composites with Strontium Hexaferrite Ultrafine Particles in the SrO–Fe2O3–B2O3–SiO2 System

Glass samples with nominal compositions SrFe₁₂O₁₉+(12− n )SrB₂O₄+nSrSiO₃, n =3, 6, 9 were prepared by rapid quenching of the melt. Processes of glass devitrification were studied. The samples were annealed at temperatures of 600–900°C, and the resulting glass–ceramics was characterized by XRD, SEM, EDX, and magnetic measurements. SrFe₁₂O₁₉ crystallizes above 700°C and forms nano- and submicron platelet particles with the aspect ratio depending on the thermal treatment conditions. The glass–ceramic samples annealed at 900°C show coercive force values in the range of 422–455 kA/m.     

Liquid salt cooled flexible conversion ratio fast reactor: Neutronic design

This paper presents the neutronic design of a liquid salt cooled fast reactor with flexible conversion ratio. The main objective of the design is to accommodate interchangeably within the same reactor core alternative transuranic actinides management strategies ranging from pure burning to self-sustainable breeding. Two, the most limiting, core design options with unity and zero conversion ratios are described. Ternary, NaCl-KCl-MgCl₂ salt was chosen as a coolant after a rigorous screening process, due to a combination of favourable neutronic and heat transport properties. Large positive coolant temperature reactivity coefficient was identified as the most significant design challenge. A wide range of strategies aiming at the reduction of the coolant temperature coefficient to assure self-controllability of the core in the most limiting unprotected accidents were explored. However, none of the strategies resulted in sufficient reduction of the coolant temperature coefficient without significantly compromising the core performance characteristics such as power density or cycle length. Therefore, reactivity control devices known as lithium thermal expansion modules were employed instead. This allowed achieving all the design goals for both zero and unity conversion ratio cores. The neutronic feasibility of both designs was demonstrated through calculation of reactivity control and fuel loading requirements, fluence limits, power peaking factors, and reactivity feedback coefficients.     

Cross-comparison of fast reactor concepts with various coolants

Four fast reactor concepts using lead (LFR), liquid salt, NaCl-KCl-MgCl₂ (LSFR), sodium (SFR), and supercritical CO₂ (GFR) coolants are compared. Since economy of scale and power conversion system compactness are the same by virtue of the consistent 2400 MWt rating and use of the S-CO₂ power conversion system, the achievable plant thermal efficiency, core power density and core specific powers become the dominant factors. The potential to achieve the highest efficiency among the four reactor concepts can be ranked from highest to lowest as follows: (1) GFR, (2) LFR and LSFR, and (3) SFR. Both the lead- and salt-cooled designs achieve about 30% higher power density than the gas-cooled reactor, but attain power density 3 times smaller than that of the sodium-cooled reactor. Fuel cycle costs are favored for the sodium reactor by virtue of its high specific power of 65 kW/kgHM compared to the lead, salt and gas reactor values of 45, 35, and 21 kW/kgHM, respectively. In terms of safety, all concepts can be designed to accommodate the unprotected limiting accidents through passive means in a self-controllable manner. However, it does not seem to be a preferable option for the GFR where the active or semi-passive approach will likely result in a more economic and reliable plant. Lead coolant with its superior neutronic characteristics and the smallest coolant temperature reactivity coefficient is easiest to design for self-controllability, while the LSFR requires special reactivity devices to overcome its large positive coolant temperature coefficient. The GFR required a special core design using BeO diluent and a supercritical CO₂ reflector to achieve negative coolant void worth—one of the conditions necessary for inherent shutdown following large LOCA. Protected accidents need to be given special attention in the LSFR and LFR due to the small margin to freezing of their coolants, and to a lesser extent in the SFR.     

UV‐Triggered Polydopamine Secondary Modification: Fast Deposition and Removal of Metal Nanoparticles

Since the first report in 2007, polydopamine (PDA) coating has shown great potential as a general and versatile method to create functional nanocoatings on arbitrary substrates. Slow kinetics and poor controllability of the coating and secondary modification processes, however, have limited the further development of this attractive method. In this work, it is demonstrated that UV irradiation at 365 nm significantly accelerates the process of secondary modification of a PDA‐coated surface. The kinetics of both thiol and amine modifications of PDA are increased 12‐fold via UV irradiation, while the kinetics of metal ion reduction at the PDA interface is increased more than 550 times. Moreover, it is demonstrated that irradiating a PDA/metal nanoparticle composite surface with UV light at 254 nm leads to dissolution of the deposited metal nanoparticles (MNPs). Finally, grayscale metallic patterns, dynamic deposition, and removal of MNPs on PDA surface are realized with the proposed method.     

Thermoelectric Effect Spectroscopy and Photoluminescence of High-Resistivity CdTe:In

Thermoelectric effect spectroscopy and photoluminescence techniques were used to study the defect levels in samples from three crystals of CdTe:In grown by the vertical gradient freeze method. The main goal of the investigation was to study defects, which strongly trap charge carriers or act as recombination centers in order to eliminate them from the technological process. The main difference among detecting and non-detecting samples was the absence of electron traps with a very high capture cross-section and energy 0.6 eV to 0.7 eV, which act as lifetime killers even at low concentrations. Recently published ab initio calculations show a complex of Te antisite and Cd vacancy within this energy range.     

0.18μm铜金属双重镶嵌工艺中空间成像套刻精度分析

由于空间成像套刻(Overlay)技术的预算随集成电路(IC)设计规范的紧缩而吃紧,因此,Overlay测量技术准确度的重要意义也随之提高。通过对后开发(AfterDevelopDI)阶段和后蚀刻(AfterEtchFI)阶段的Overlay测量结果进行比较,研究了0.18μm设计规范下的铜金属双重镶嵌工艺过程中的Overlay准确度。在确保对同一个晶圆进行后开发(DI)阶段和后蚀刻(FI)阶段测试的条件下,我们对成品晶圆的5个工艺层进行了比较。此外,还利用CD-SEM(线宽-扫描电子显微镜)测量了某个工艺层(PolyGate)上的芯片内Overlay,并与采用分割线方法的光学Overlay测量结果进行了比较。发现对芯片内overlay的校准存在着严重的局限性,即在应用CD-SEM时缺乏合适的结构进行Overlay测量。我们还将继续为大家提供定量的比较结果,同时也会向大家推荐组合的CD-SEM测量结构,使其能够被应用到今后的光刻设计中。