Immunotherapy in Advanced Prostate Cancer—Light at the End of the Tunnel?

Immunotherapeutic treatment approaches are now an integral part of the treatment of many solid tumors. However, attempts to integrate immunotherapy into the treatment of prostate cancer have been disappointing so far. This is due to a highly immunosuppressive, “cold” tumor microenvironment, which is characterized, for example, by the absence of cytotoxic T cells, an increased number of myeloid-derived suppressor cells or regulatory T cells, a decreased number of tumor antigens, or a defect in antigen presentation. The consequence is a reduced efficacy of many established immunotherapeutic treatments such as checkpoint inhibitors. However, a growing understanding of the underlying mechanisms of tumor–immune system interactions raises hopes that immunotherapeutic strategies can be optimized in the future. The aim of this review is to provide an overview of the current status and future directions of immunotherapy development in prostate cancer. Background information on immune response and tumor microenvironment will help to better understand current therapeutic strategies under preclinical and clinical development.     

The effect of compatibilizers and organically modified nanoclay on the morphology and performance properties of poly(acrylonitrile–butadiene–styrene)/polypropylene blends

In this study, poly(acrylonitrile–butadiene–styrene)/polypropylene (ABS/PP) blends with various compositions were prepared by melt intercalation in a twin‐screw extruder. Modifications of the above blends were performed by using organically modified montmorillonite (OMMT, Cloisite 30B) reinforcement as well as two types of compatibilizers, namely polypropylene grafted with maleic anhydride (PP‐g‐MAH) and ABS grafted with maleic anhydride (ABS‐g‐MAH). Increasing the PP content in ABS matrix seems to increase the melt flow and thermal stability of their blends, whereas a deterioration of the tensile properties was recorded. On the other hand, the addition of ABS to PP promotes the formation of the β‐crystalline phase, which became maximum at 30 wt% ABS concentration, and increases the crystallization temperature (T_c) of PP. A tendency for increase of T_c was also recorded by incorporation of the above compatibilizers, whereas the glass transition temperature (T_g) of PP and SAN phase in ABS was reduced. Regarding the Young's modulus, the greatest improvement was observed in pure ABS/PP blends containing organically modified nanoclay. However, in reinforced pure PP, the use of compatibilizers is recommended in order to improve the elastic modulus. The addition of OMMT to noncompatibilized and compatibilized ABS/PP blends significantly improves their storage modulus. POLYM. ENG. SCI., 56:458–468, 2016. © 2016 Society of Plastics Engineers     

Regulatory Cell Populations in Relapsing-Remitting Multiple Sclerosis (RRMS) Patients: Effect of Disease Activity and Treatment Regimens

Multiple sclerosis (MS) is a demyelinating disease of the central nervous system (CNS) of autoimmune etiology that results from an imbalance between CNS-specific T effector cells and peripheral suppressive mechanisms mediated by regulatory cells (RC). In this research, we collected blood samples from 83 relapsing remitting MS (RRMS) patients and 45 healthy persons (HC), to assess the sizes of their RC populations, including CD4⁺CD25^highFoxp3⁺ (nTregs), CD3⁺CD4⁺HLA⁻G⁺, CD3⁺CD8⁺CD28⁻, CD3⁺CD56⁺, and CD56^bright cells, and how RC are affected by disease activity (acute phase or remission) and types of treatment (methylprednisolone, interferon, or natalizumab). In addition, we isolated peripheral blood mononuclear cells (PBMC) and cultured them with peptides mapping to myelin antigens, to determine RC responsiveness to autoantigens. The results showed decreased levels of nTregs in patients in the acute phase ± methylprednisolone and in remission + natalizumab, but HC levels in patients in remission or receiving interferon. Patients + interferon had the highest levels of CD3⁺CD4⁺HLA⁻G⁺ and CD3⁺CD8⁺CD28⁻ RC, and patients in the acute phase + methylprednisolone the lowest. Patients in remission had the highest levels of CD3⁺CD56⁺, and patients in remission + natalizumab the highest levels of CD56^bright cells. Only nTregs responded to autoantigens in culture, regardless of disease activity or treatment. The highest suppressive activity was exhibited by nTregs from patients in remission. In conclusion, in RRMS disease activity and type of treatment affect different RC populations. nTregs respond to myelin antigens, indicating that it is possible to restore immunological tolerance through nTreg induction.     

Predictive control of surface mean slope and roughness in a thin film deposition process

This work focuses on the development of a model predictive control algorithm to simultaneously regulate the surface slope and roughness of a thin film growth process to optimize thin film light reflectance and transmittance. Specifically, a thin film deposition process modeled on a one-dimensional triangular lattice that involves two microscopic processes: an adsorption process and a migration process, is considered. Kinetic Monte Carlo (kMC) methods are used to simulate the thin film deposition process. To characterize the surface morphology and to evaluate the light trapping efficiency of the thin film, surface roughness and surface slope are introduced as the root mean squares of the surface height profile and surface slope profile. An Edwards–Wilkinson (EW)-type equation is used to describe the dynamics of the surface height profile and predict the evolution of the root-mean-square (RMS) roughness and RMS slope. A model predictive control algorithm is then developed on the basis of the EW equation model to regulate the RMS slope and the RMS roughness at desired levels by optimizing the substrate temperature at each sampling time. The model parameters of the EW equation are estimated from simulation data through least-square methods. Closed-loop simulation results demonstrate the effectiveness of the proposed model predictive control algorithm in successfully regulating the RMS slope and the RMS roughness at desired levels that optimize thin film light reflectance and transmittance.     

Anonymity and everlasting privacy in electronic voting

International Journal of Information Security - Everlasting privacy protects cryptographic voting systems against the weakening of intractability assumptions on which they may be based. We find...     

Efficient searchable symmetric encryption supporting range queries

International Journal of Information Security - The demand for cloud storage services continuously increases putting at risk the privacy of the outsourced data. Data encryption is the obvious...     

SRv6-based Time-Sensitive Networks (TSN) with low-overhead rerouting

Time-Sensitive Networks (TSN) aims at providing a solid underpinning for the support of application connectivity demands across a wide spectrum of use cases and operational environments, such as industrial automation and automotive networks. However, handling network updates in TSN entails additional challenges, stemming from the need to perform both flow rerouting and TSN schedule reconfiguration. To address this issue, we propose a software-defined network (SDN)-based approach for low-overhead TSN network updates, exploiting segment routing over IPv6 (SRv6) for path control. To this end, we introduce the concept of TSN subgraphs in order to quickly reschedule the flows traversing the problematic area and propose a TSN-aware routing heuristic to minimize the convergence time. We further describe the control plane implementation and its integration into Mininet, which empowers us to conduct a wide range of performance tests. Our evaluation results indicate that our approach yields faster recovery and reduces significantly the number of required reconfigurations upon failures, at the expense of a small SRv6 encoding/decoding overhead.     

Study of the dyeing properties of saffron and ultrafiltrated saffron powders,as colourants for natural and synthetic fibres

There is a noticeable growing interest in the use of natural dyes in contemporary textile dyeing, motivated by the requirements imposed, in favour of environmental prosperity. The use of natural dyes reduces significantly both the energy requirements and the environmental impact of the process. In the present work natural and synthetic fibres were dyed with the dyestuff isolated from Crocus sativus L., after aqueous extraction of the dried stigmas of the plant. Additionally, part of the powder was purified by using ultrafiltration technology. The saffron extract and the ultrafiltrated saffron retentate were used to dye cotton, wool, nylon and polyester, in various depths of shade and temperatures. Both saffron and ultrafiltrated saffron successfully dyed not only the natural substrates, but also the synthetic ones, while higher dyeing temperatures produced level dyeing with all substrates used. Ultrafiltrated saffron powder produced brighter and much stronger dyeing to the original saffron powder, due to the elimination of extraction by-products. Isothermal adsorptions for both colourants were performed on all substrates in order to investigate their adsorption mechanism. It was found that saffron and ultrafiltrated saffron follow a Freundlich-type adsorption isotherm on cotton, wool and nylon which is a typical mechanism for a planar-directed dye of big molecular weight. Nernst-type adsorption was found to occur on polyester which again is typical for the adsorption of disperse dyes on polyester. Thus, saffron can be claimed as a universal dye, able to successfully dye natural and synthetic substrates.