夹层式结构在金刚石钻头上的应用

采用冷压成型夹层和加灰(过渡层)热压烧结法制备了一种夹层结构金刚石钻头.经与普通金刚石钻头进行对比试验发现,夹层结构钻头速度和使用寿命比普通钻头有了明显的提高,其原因是由于钻头工作时岩脊的体积破碎作用.这样初步找到了一种既能提高金刚石钻头钻进速度,又能增加金刚石钻头寿命的制造方法.     

甲基丙烯酸缩水甘油酯的合成

在季铵盐催化作用下 ,甲基丙烯酸与环氧氯丙烷反应生成甲基丙烯酸缩水甘油酯。实验结果表明 ,二步法可获得较高的产率     

流动注射分析法对复合肥中五氧化二磷的分析

在复合肥的生产过程中，用流动注射分析测定磷矿，磷石膏，磷酸中的五氧化二磷，该方法制样简单，分析速度快，结果准确。     

蛋白质化学修饰的研究进展

蛋白质分子具有极其复杂的结构层次，用化学修饰的方法研究蛋白质分子的结构与功能的关系一直是生物化学和分子生物学领域的热点。人们研究出许多小分子化学修饰剂并进行了多种类型的化学修饰。综述了蛋白质化学修饰领域的研究现状与水平，同时强调蛋白质的化学修饰是生化药物研究开发的重要手段之一。     

Transformation of Crystal Phase of Micron-sized Rutile TiO2 and Investigation on its Sonocatalytic Activity

The partial transformation of crystal phase of micron-sized TiO₂ powder from rutile to anatase was realized utilizing microwave irradiation in hydrogen peroxide solution. Afterwards, the ultrasound of low power was used as an irradiation source to induce the transition crystal TiO₂ powder to perform the sonocatalytic activity through the degradation of azo fuchsine in aqueous solution. The results show that the sonocatalytic activity of the transition crystal TiO₂ powder is obviously higher than that of pure micron-sized rutile and anatase TiO₂ powders. The degradation ratio of azo fuchsine in the presence of the transition crystal TiO₂ powder attains nearly 80% within 80 min ultrasonic irradiation.     

低温共烧陶瓷技术及其应用

低温共烧陶瓷(low temperature co-fired ceramic,LTCC)技术是实现电子元件小型化、片式化的一种理想的封装技术,已成为电子元件集成的主要工艺方式,引起了人们的广泛关注。本文详细叙述了LTCC技术的特点、LTCC材料体系、国内外发展现状以及LTCC技术在电子元件集成中的应用。认为利用LTCC技术来实现电源、有源和无源器件的一体化将是今后信息功能陶瓷发展的一个重要方向。我国应该抓住LTCC技术所面临的前所未有的发展机遇,大力开发具有自主知识产权的LTCC技术,整体提升我国在电子集成领域的技术水平和国际竞争力。     

铝电解电容器用新型宽温高压工作电解液

采用异癸二酸铵为主溶质,乙二醇和γ-丁内酯为复合溶剂,制备新型宽温(-40~105℃)、高压(400 V)铝电解电容器工作电解液,并检测了该电解液和用该电解液生产的电解电容器的性能。测试结果表明,该工作电解液25℃时电导率达到1.6 mS/cm,闪火电压为480 V,-40℃下未见晶体析出;CD 110/400 V铝电解电容器试样的漏电流≤10μA,损耗0.03,容量变化率只有-3%。经过105℃高温贮存250 h后各项电气性能不仅优于国家标准,而且能达到严格的企业标准。     

聚氯乙烯中杂质粒子的产生原因及解决措施

通过分析聚氯乙烯树脂中杂质粒子产生的主要原因，提出了在采购、保管、生产、清理、分析等环节的解决措施。     

Effect of catalysts in the quality of syngas and by-products obtained by co-gasification of coal and wastes. 1. Tars and nitrogen compounds abatement

The aim of this work is to analyse the possibility of using co-gasification technology to process coal mixed with wastes to take profit of its energy content and at the same time to minimize the environmental impact associated with the use of wastes and to diminish the costs of flue gas treatment. The addition to coal of different types of materials, like: pine based waste, petcoke and polyethylene (PE), was not found to give rise to any operational problems, regarding both the feeding system and gasification process and led to higher energy conversions, however, the gas presented higher tars and hydrocarbons content. Several catalysts were tested, such as, dolomite, olivine, nickel and magnesium oxides, zinc oxides and cobalt and molybdenum oxides. Catalyst action was analysed in tars release and also in ammonia compounds reduction. The presence of catalysts allowed increasing hydrogen release, whilst there was a decrease in hydrocarbons and tars contents. A nickel-magnesium oxide was the catalyst that led to the highest reduction in hydrocarbons and tars. This catalyst also led to the lowest NH₃ content in the fuel gas produced, due to the catalyst efficiency in NH₃ destruction.     

New approach for the preparation of nanoporous polyorganosilicate low‐k films

The distribution of pores and the mechanical properties of materials are the key factors in preparing satisfactory low‐k films. In the present study, a kind of silsesquioxane‐polyethylene glycol (SSQ‐PEG) was synthesized and used as a template to make the distribution of pores more even in the low‐k films. The crosslinking density of films could be adjusted by the sol‐gel of tetramethoxysilane/dimethoxydimethylsilane with various proportions. The porosity of films could also be adjusted with different proportions of pendant PEG chains introduced. A dielectric constant as low as 2.1 had been achieved for nanoporous polyorganosilicate films with good tenacity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1238–1243, 2007