Synthesis of copolymers of tert‐butyl vinyl ether with maleic and citraconic anhydrides

In the present study, the effects of charge‐transfer complex formation and intramolecular fragmentation (side‐chain lactonization) in radical copolymerization of tert‐butyl vinyl ether (t‐BVE) with anhydrides of maleic (MA) and citraconic (CA) acids and the structure–thermal behavior relationships of the resulting copolymers were examined using the ¹H‐NMR, FTIR, DSC, and TGA analysis methods. It was shown that copolymerization under the chosen conditions proceeded through intramolecular fragmentation with the formation of γ‐lactone units. Side‐chain fragmentation of t‐BVE–MA and t‐BVE–CA copolymers also was confirmed by TGA and DSC analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2455–2463, 2006 2006     

Thermal characterization of n‐alkyl maleate‐styrene‐allyl propionate terpolymers

Thermal characterization of maleic anhydride‐styrene‐allyl propionate (MA‐St‐AP) terpolymer and its ester derivatives named as n‐alkyl maleate and shown as nPr MA‐St‐AP, nBu MA‐St‐AP, nPn MA‐St‐AP, and nBz MA‐St‐AP was carried out. The thermal characterization was performed using thermal analysis techniques such as TGA, DTA, DSC, and TMA. Different results were observed between the original terpolymer and its ester derivatives. Thermal stabilities of the terpolymer and its ester derivatives were compared by using various measurements plotted as TGA, DTA, DSC, and TMA curves. The increase in the alcohols' carbon numbers added to the original terpolymer results in ester derivatives with different thermal stability behavior. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 600–604, 2007     

Synergic influence of a surfactant and ultrasonication on the preparation of soluble,conducting polydiphenylamine/silica‐nanoparticle composites

Conducting polydiphenylamine was used to encapsulate silica nanoparticles through the oxidative polymerization of diphenylamine in the presence of ultrasonic irradiation. The polymerization was performed in the presence of sodium lauryl sulfate as a surfactant. Experiments performed in the absence of ultrasound clearly demonstrated that the application of ultrasonication played multiple roles in the preparation of a composite of polydiphenylamine with silica nanoparticles. Ultrasonication dispersed the silica nanoparticles, converted sodium lauryl sulfate to lauryl alcohol, and augmented the dispersion of the silica‐nanoparticle/polydiphenylamine composite in an organic medium. Silica‐nanoparticle/polydiphenylamine composites were also prepared in the absence of ultrasound and/or sodium lauryl sulfate. The silica‐nanoparticle/polydiphenylamine composites were characterized with Fourier trans form infrared spectroscopy, ultraviolet–visible/near‐infrared spectroscopy, and thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3912–3918, 2006     

Electrodeposition of smooth and adherent film of polypyrrole on lead electrode

Electropolymerization of pyrrole on lead substrate electrode was studied. Due to electrochemical activity of Pb in acidic media, this process is only possible at basic pHs. For this purpose, electropolymerization process was performed in an aqueous solution of Na₂SO₄ with pH 12. Potentiodynamic cycling shows the Pb oxidation at the first cycles. In subsequent cycles, polypyrrole film grows on the oxidized lead substrate. Of course, as the passive film is highly porous, a composite of polypyrrole/PbSO₄ is formed in the first layers. However, subsequent cycling leads to the formation of pure polypyrrole film. According to this structure and strong connection of the polymer film to the substrate surface via this composite layer, the polypyrrole film deposited on the lead surface has enhanced mechanical stability. AFM measurements showed peculiar smoothness of both composite and lateral polypyrrole films. This synthesis approach is of particular interest for the preparation of highly stable polymer films and fabrication of supercapacitors with a polymer/PbSO₄ conductive structure.     

尿素嵌入法制备纤维素氨基甲酸酯的研究

探讨了尿素嵌入法制备纤维素氨基甲酸酯(CC)的生产工艺。指出:选用聚合度为450~625、α-纤维素含量大于90/的纤维素浆粕,用14/~16/的氢氧化钠溶液,于40~50℃条件下活化处理30~40min后,与尿素以1∶2~3的比例混合,在137℃的二甲苯体系中反应2~3h,便可得到含氮量为2.4/~3.5/的纤维素氨基甲酸酯产物。该产物在氢氧化钠溶液中可形成良好的稳定溶液,过滤性好,可直接用于纺丝。     

Investigation of the effects of fatty acids on the compressive strength of the concrete and the grindability of the cement

In cement industry, a great energy consumption has been observed during grinding of clinker. To reduce this consumption, some waste products have been used as grinding aids.In this investigation, the effects of sunflower oil (SO), oleic acid (OA), stearic acid (SA), myristic acid (MA) and lauric acid (LA) on the fineness and strength of the cement have been examined. These aids were added into clinker in certain ratios based on the cement clinker weight and the grinding has been done for a definite time at the same condition.All of the fatty acids used increased the fineness as compared with the cement without the grinding additives. SO and OA decreased the strength significantly, LA decreased it to a lesser extent and SA increased it definitely according to the common cement. But MA did not alter the strength of the cement as much as SA. In addition, the covering of the balls influences the grinding of cement clinker unfavourably.     

Lignan contents in sesame seeds and products

Sesame seed (Sesamum indicum L.) is a rich source of furofuran lignans with a wide range of potential biological activities. The major lignans in sesame seeds are the oil‐soluble sesamin and sesamolin, as well as glucosides of sesaminol and sesamolinol that reside in the defatted sesame flour. Upon refining of sesame oil, acid‐catalyzed transformation of sesamin to episesamin and of sesamolin to epimeric sesaminols takes place, making the profile of refined sesame oils different from that of virgin oils. In this study, the total lignan content of 14 sesame seeds ranged between 405 and 1178 mg/100 g and the total lignan content in 14 different products, including tahini, ranged between 11 and 763 mg/100 g. The content of sesamin and sesamolin in ten commercial virgin and roasted sesame oils was in the range of 444–1601 mg/100 g oil. In five refined sesame oils, sesamin ranged between 118 and 401 mg/100 g seed, episesamin between 12 and 206 mg/100 g seed, and the total contents of sesaminol epimers between 5 and 35 mg/100 g seed, and no sesamolin was found. Thus, there is a great variation in the types and amounts of lignans in sesame seeds, seed products and oils. This knowledge is important for nutritionists working on resolving the connection between diet and health. Since the consumption of sesame seed products is increasing steadily in Europe and USA, it is important to include sesame seed lignans in databases and studies pertinent to the nutritional significance of antioxidants and phytoestrogens. It is also important to differentiate between virgin, roasted and refined sesame oils.     

氢气压缩机机封冷却水循环利用改造

针对18万t/a离子膜烧碱装置中氢气处理系统的氢气压缩机机封水压力不稳定等问题,对工艺进行了改造,改造后的生产工艺安全、稳定,每年可节约电费14.26万元,节约水费3.8万元。     

Hydrogen production from used lubricating oils

Used lubricating oils (lube oils) are generated throughout the year and collected in central locations in many communities. Disposing lube oil in an improper manner contaminates environment to a great degree. Used lube oil can be valuable as a re-refined lubricant or as an energy source. Lube oil is a complex mixture of aliphatic and polycyclic hydrocarbons formulated to withstand high service temperatures in internal combustion engines. Both synthetic and mineral oils contain a high concentration of hydrogen (about 13–14 wt%). At the Florida Solar Energy Center, we have developed a process that converts lube oils to hydrogen and other valuable low molecular weight hydrocarbons. The lube oil reformation experiments were carried out using several commercially available dehydrogenation catalysts at a range of reactor temperatures and pressures, residence times and steam to carbon ratios. In this paper, the data obtained to date and the results are presented and discussed.     

Ellipsoidal neighbourhood outlier factor for distributed anomaly detection in resource constrained networks

Anomaly detection in resource constrained wireless networks is an important challenge for tasks such as intrusion detection, quality assurance and event monitoring applications. The challenge is to detect these interesting events or anomalies in a timely manner, while minimising energy consumption in the network. We propose a distributed anomaly detection architecture, which uses multiple hyperellipsoidal clusters to model the data at each sensor node, and identify global and local anomalies in the network. In particular, a novel anomaly scoring method is proposed to provide a score for each hyperellipsoidal model, based on how remote the ellipsoid is relative to their neighbours. We demonstrate using several synthetic and real datasets that our proposed scheme achieves a higher detection performance with a significant reduction in communication overhead in the network compared to centralised and existing schemes.