智能打壳装置

在一台HAL 2 3 0电解槽上安装了 5个带有节能系统 (EnergySavingSystem)的汽缸和一个可用于快速测试寿命的“虚拟”ESS汽缸。测试的目的是使用ESS系统在正常操作中估计空气节省量和证明包括ESS系统在内的打壳装置的预期寿命周期能达到 8年。测试表明ESS系统的预期寿命超过 8年 ,与传统系统相比 ,可节省 5 9%的空气。如果全部使用该系统 ,可节省 65 %的能量。     

Defect classification using a new feature for pulsed eddy current sensors

The objective of this study is to identify defects such as surface cracks, subsurface defects and metal losses using feature based pulsed eddy current sensors. A new feature, termed as the rising point, related to the propagation time of electromagnetic waves in metallic targets is proposed for defect classification. Experimental studies of the validation, robustness of the new feature of rising time are reported. In addition to other features, defects can be detected and quantified robustly and lift-off can also be derived from the rising time. Conclusion and further work are derived on the basis of the findings.     

On the role of hydrophilicity and hydrophobicity in aqueous heterophase polymerization

This paper reports on experimental results of aqueous heterophase polymerizations with monomers of quite different solubility in water ranging from the water-soluble 2-hydroxyethyl methacrylate to lauryl methacrylate with solubility in water of only about 10⁻⁴ mM. A calorimetric study revealed the strong influence of both the hydrophilicity of the monomer and the stirrer speed on the rate of polymerization in the absence of surfactants. In order to obtain maximum latex yield and high efficiency (which is a measure considering colloidal properties, polymerization recipe, and polymerization parameters) the initiator-surfactant combination must be properly chosen in dependence on the hydrophilicity of the monomer. Results are presented for sodium alkyl sulfates or disodium-N-stearoyl-l-glutamate as surfactant and potassium peroxodisulfate, or poly(ethylene glycol)-azo- compounds, or 2,2′-azobis(N-2′-methylpropanoyl-2-amino-alkyl-1)-sulfonates as initiators.     

Squaring down of general MIMO systems to invertible uniform rank systems via pre- and/or post-compensators

Pre- and/or post-compensators are designed to square down a general MIMO system to a uniform rank system, the structure of which is almost similar to a SISO system. The method of squaring down either does not change the finite zero structure of the given MIMO system or simply adds additional finite zeros in the left half s-plane. The significance of such a squaring down lies in the simplicity of the structure of a uniform rank system lending itself for easy analysis and control design.     

Single mask fabrication process for movable MEMS devices

The current work reports on the realization of movable micromachining devices using self-aligned single-mask fabrication process. Only dry etching process utilizing inductively coupled plasma reactive ion etching was used to release 3D micro structures from single crystal silicon substrate. No wet etching process is required to release the structures as is the case with silicon on insulator (SOI) wafers. Also the developed process does not require an SOI substrate and accordingly dispensing with the application of a wet etching step, thus yielding uniform structures without stiction. The optimized process was applied to realize thermally actuated microgrippers. The article presents the development of the fabrication process and demonstrates the operation of the fabricated device. The optimized process provides an avenue for low cost fabrication of movable micromachining devices without the use of complicated wet etching steps typically associated with SOI substrates.     

Towards a distributed multi-agent framework for shared resources scheduling

Nowadays, manufacturers have to share some of their resources with partners due to the competitive economic environment. The management of the availability periods of shared resources causes a problem because it is achieved by the scheduling systems, which assume a local environment where all resources are on the same site. Therefore, distributed scheduling with shared resources is an important research topic. In this communication, we introduce the architecture and behaviour of DSCEP framework (Distributed, Supervisor, Customer, Environment, and Producer) under shared resources situation with disturbances. We are using a simple example of manufacturing system to illustrate the ability of DSCEP framework to solve the shared resources scheduling problem in complex systems.     

Silhouette-based human action recognition using SAX-Shapes

Human action recognition is an important problem in Computer Vision. Although most of the existing solutions provide good accuracy results, the methods are often overly complex and computationally expensive, hindering practical applications. In this regard, we introduce the combination of time-series representation for the silhouette and Symbolic Aggregate approXimation (SAX), which we refer to as SAX-Shapes, to address the problem of human action recognition. Given an action sequence, the extracted silhouettes of an actor from every frame are transformed into time series. Each of these time series is then efficiently converted into the symbolic vector: SAX. The set of all these SAX vectors (SAX-Shape) represents the action. We propose a rotation invariant distance function to be used by a random forest algorithm to perform the human action recognition. Requiring only silhouettes of actors, the proposed method is validated on two public datasets. It has an accuracy comparable to the related works and it performs well even in varying rotation.     

Polymer waste recycling over “used” catalysts

Catalytic degradation of high-density polyethylene (HDPE) was carried out under nitrogen using a laboratory fluidised bed reactor operating at 360 °C with catalyst to polymer feed ratio of 2:1 and at 450 °C with catalyst to polymer feed ratio of 6:1 under atmospheric pressure. The catalysts used in this study were ZSM-5, US-Y, ASA, fresh FCC (fluid catalytic cracking) commercial catalyst (Cat-A) and equilibrium FCC catalysts with different levels of metal poisoning were studied. The initial results for polymer degradation at 360 °C (catalyst to polymer ratio of 2:1) in a fluidised bed reactor in terms of the yield of volatile hydrocarbon products were: model catalysts>commercial FCC catalyst>E-Cats. However, when the process conditions more closely resembled to FCC conditions, the fresh commercial FCC catalyst was more favourable in terms of the yield of volatile hydrocarbon products. The degradation of HDPE over E-Cats although reduced was similar to ASA in product selectivity and yield, and the level of metal contamination did not affect the product stream generated. A simple economic evaluation of polymer recycling process is reported showing that a catalytic system based on E-Cats appears comparable in costs to a commercial thermal cracking plant.     

O3/H2O2 Treatment of Methyl-terf-Butyl Ether in Contaminated Waters: Effect of Background COD on the O3-Dose

The destruction of methyl-tert-butyl ether (MTBE) in contaminated waters by O₃/H₂0₂ process was studied and the influence background COD, alkalinity, and hydrogen peroxide and MTBE concentrations on process treatment efficiency and ozone dosage was investigated. The treatment efficiency was evaluated by an Efficiency Index, which is based on electrical energy requirement for ozone production. It was found that the treatment efficiency decreases linearly with increasing concentrations of MTBE at constant background COD and with background COD at constant MTBE concentration. A simplified kinetic scheme was presented to account for these observations.     

The Shape Boltzmann Machine: A Strong Model of Object Shape

A good model of object shape is essential in applications such as segmentation, detection, inpainting and graphics. For example, when performing segmentation, local constraints on the shapes can help where object boundaries are noisy or unclear, and global constraints can resolve ambiguities where background clutter looks similar to parts of the objects. In general, the stronger the model of shape, the more performance is improved. In this paper, we use a type of deep Boltzmann machine (Salakhutdinov and Hinton, International Conference on Artificial Intelligence and Statistics, 2009) that we call a Shape Boltzmann Machine (SBM) for the task of modeling foreground/background (binary) and parts-based (categorical) shape images. We show that the SBM characterizes a strong model of shape, in that samples from the model look realistic and it can generalize to generate samples that differ from training examples. We find that the SBM learns distributions that are qualitatively and quantitatively better than existing models for this task.