Temperature-Invariant Scaling for Compressible Turbulent Boundary Layers with Wall Heat Transfer

In a recent paper by Zhang et al. in 2012, a Mach number-invariant scaling was proposed to account for the effect of variation of free-stream Mach number in supersonic turbulent boundary layers. The present work focuses on the effect of variation of wall temperature with strong heating and cooling at the wall. Direct numerical simulation is used to study scaling and turbulence structure of a spatially evolving Mach 2 supersonic boundary layer at a friction Reynolds number of 500. A new scaling law is proposed to account for temperature-dependent fluid-property variations. This universal scaling appears superior to the existing models with the novelty that it applies not only for the mean-velocity profile but also extends to the turbulent transport, production, and dissipation terms in the budget of the turbulent kinetic energy.     

3D seismic and formation micro-imager (FMI) integrated study to delineate depositional pattern of Abu Madi (Upper Miocene) clastic reservoir rocks in El-Wastani gas field,onshore Nile Delta,Egypt

Ten wells (EW-4, EW-5, EW-6, EW-7, EW-8, EW-9, EW-10, EW-12, EW-13 and EW-15) were interpreted using the composite well logs, data of core analysis, gamma-ray logs, formation micro-imager logs (FMI), and 3D seismic data in SEGY format to understand the stratigraphy of the onshore, Nile Delta, Egypt.The amplitude analysis of 3-D seismic horizon slice of Lower Abu Madi rock unit together with the lithostratigraphic correlation through the study area depending on the gamma-ray log “HSGR” (left to right increasing), and the identification of type of bed geometry, nature of bed contacts, type of the sedimentary structures and the dominant formative paleocurrents by using some available borehole micro-resistivity images (FMI) and core photos. All of these techniques are used together to define the different depositional facies and depositional environment of the Messinian clastics (Lower Abu Madi rock unit), which is considered to be the main reservoir in the El-Wastani gas field, onshore Nile Delta, Egypt.The present study of depositional pattern of the Upper Miocene clastics reservoir (Lower Abu Madi rock unit) revealed that it is represented by high sinuous meandering channels or paleo-valley and three types of fluvial facies were defined; channel fill, channel margin, and floodplain basin.     

Recycling of glass in synthesis of MCM-48 mesoporous silica as catalyst support for Ni<Subscript>2</Subscript>O<Subscript>3</Subscript> photocatalyst for Congo red dye removal

Glass was successfully recycled in the synthesis of mesoporous silica MCM-48 which was used as catalyst support for nickel oxide photocatalyst. The resulted products were evaluated using X-ray diffraction, scanning electron microscope and UV–Vis spectrophotometer. The precipitated nickel oxide is of Ni₂O₃ form and loading of it onto MCM-48 resulted in a reduction in the band gap energy from about 3.66 eV to about 2.4 eV. The role of MCM-48 as catalyst support for Ni₂O₃ in enhancing the adsorption capacity and photocatalytic properties of nickel oxide was evaluated through series of equilibrium studies and photocatalytic degradation of Congo red dye under visible light. Using of glass-based MCM-48 as catalyst support for Ni₂O₃ showed enhancing the adsorption capacity by 31.3 and 14.8% higher than the adsorption capacity of Ni₂O₃ and MCM-48, respectively. Also, the photocatalytic degradation percentage increased by about 67.3% relative to the Ni₂O₃ degradation percentage. The nature of MCM-48/Ni₂O₃ adsorption mechanism is chemisorption and occurs in multilayer form throughout the heterogeneous surface of the composite. The using of MCM-48 as support for Ni₂O₃ photocatalyst enhanced the adsorption capacity through increasing the total surface area. The loading process resulted in fixing of the Ni₂O₃ particles throughout the porous structure which producing more exposed active photocatalyst sites and active adsorption sites for the incident photons as well as preventing the nickel oxide particles from agglomeration. Based on the obtained results, supporting of Ni₂O₃ particles onto MCM-48 is promising active centers for the degradation of Congo red dye molecules.     

Audio watermarking based on synergy between Lucas regular sequence and Fast Fourier Transform

Multimedia Tools and Applications - The growth of digital technology over the recent years has led to increased sending and saving of electronic media. Taking advantage of digital works without...     

Vibrational investigation of the spinning bi-dimensional functionally graded (2-FGM) micro plate subjected to thermal load in thermal environment

Microsystem Technologies - This article presented a numerical method for discovering the free vibration of a spinning bi-dimensional functionally graded materials (FGM) micro circular plate exposed...     

Three-phase four-wire shunt active power filter based on the SOGI filter and Lyapunov function for DC bus control

The three-phase four-wire shunt active power filter (SAPF) was developed to suppress the harmonic currents generated by nonlinear loads, and for the compensation of unbalanced nonlinear load currents, reactive power, and the harmonic neutral current. In this work, we consider instantaneous reactive power theory (PQ theory) for reference current identification based on the following two algorithms: the classic low-pass filter (LPF) and the second-order generalized integrator (SOGI) filter. Furthermore, since an important process in SAPF control is the regulation of the DC bus voltage at the capacitor, a new controller based on the Lyapunov function is also proposed. A complete simulation of the resultant active filtering system confirms its validity, which uses the SOGI filter to extract the reference currents from the distorted line currents, compared with the traditional PQ theory based on LPF. In addition, the simulation performed also demonstrates the superiority of the proposed approach, for DC bus voltage control based on the Lyapunov function, compared with the traditional proportional-integral (PI) controller. Both novel approaches contribute towards an improvement in the overall performance of the system, which consists of a small rise and settling time, a very low or nonexistent overshoot, and the minimization of the total harmonic distortion (THD).     

Performance enhancement of a direct absorption solar collector using copper oxide porous foam and nanofluid

The current research proposes the idea of using water-saturated metal oxide foams and water-based nanofluids as solar absorber in the direct absorption solar collectors (DASCs). Specifically, the novel solar collector design utilizes copper oxide (CuO) porous foam and nanoparticle with high optical properties and is expected to have enhanced thermal performance than the conventional collectors utilizing pure water. The finite volume technique is used to solve the governing equations of flow and heat transfer in the radiative participating media. Also, to establish the reliability and accuracy of numerical solutions, the obtained results are compared with the corresponding numerical and experimental data. The computations are carried out for different nanoparticle volume fractions, foam pore sizes, working fluid mass flow rates, and both porous layer thicknesses and positions (inserted at the lower or upper wall of the collector). It is found that the efficiency of DASC partially/fully filled with metal oxide foam is maximized when the collector is completely filled with it. Compared with the water flow, the numerical results show that the collector efficiency using CuO nanofluid and metal oxide foam is improved by up to 26.8% and 23.8%, respectively. Moreover, considering the second law of thermodynamics, the use of CuO nanofluids in the DASC seems to be more effective than the use of CuO porous foam.     

A fuzzy irregular cellular automata-based method for the vertex colouring problem

ABSTRACT

Vertex colouring is among the most important problems in graph theory which has been widely applied across different real-world problems. In vertex colouring problem (VCP), the goal is to assign a distinct colour to each vertex of the graph in such a way that no two adjacent vertices have the same colour. This paper presents a fuzzy irregular cellular automaton (FICA) for finding a near-optimal solution for the VCP. FICA is an extension fuzzy cellular automaton (FCA) in which the cells of the automaton can be arranged in an irregular structure. The aim of the proposed method is to reap the benefits of both FCA and irregular cellular automata while minimising their drawbacks. To evaluate the proposed method, various computer simulations have been conducted on a variety of graphs. The results suggest that the proposed method is able to achieve better results in terms of the minimum number of required colours and the execution time of the algorithm, compared to other peer algorithms.     

Technoeconomic study for the optimization of turbine size and wind farm layouts

A technoeconomic analysis and optimization of wind turbine size and layout are performed using WAsP software. A case study of a 100‐MW wind farm located in Egypt is considered. Wind atlas for Egypt was used as the input data of the WAsP software. Two turbine models of powers 52 and 80 MW are considered for this project. The wind turbine size and distributions are selected based on the technoeconomic optimization, namely minimum wake effect, maximum annual energy production (AEP) rate, optimum cash flow, and payback period. The future worth method is adopted in economic comparison between the two alternatives, and the cash flow diagram provided the payback period and future worth after the lifetime of the plant. The results showed that (1) the AEP dramatically decreases for a wind farm area less than 15 km²; (2) the turbine spacing, spacing‐to‐diameter ratio, and the setback distances decrease and the wind turbine density and wake losses increase with decreasing the wind turbines size; (3) the total net AEP using G52 is lower than that of using G80 by about 16%; (4) the technoeconomic analysis recommended using G80 as it has higher profit than those of G52 by about $20 million.