A model for the porosity dependence of Young's modulus in brittle solids based on crack opening displacement

A crack opening displacement concept has been introduced to model the porosity dependence of Young's modulus in polycrystalline and single phase solids. In developing the theoretical model, it is assumed that each cylindrical cavity possesses radial cracks and spherical pores possess annular flaws. When an external stress is applied on such a solid, its elastic response is shown to be governed by the pore size, the width of an annular flaw, the number of pores (or pore volume fraction) and the flaw to pore size ratio. The validity of the present approach is tested against a number of experimental data.[/p]     

Application of iterative dynamic programming to optimal control of a distiltation column

Iterative Dynamic Programming (IDP) is proven to be a useful technique for solving constrained dynamic optimisation problems. A high purity binary distillation column model has been chosen to investigate some of the IDP properties as well as its applicability. The investigated problems cover transitions from one steady state to another with the minimization of a quadratic cost function with associated terminal constraints.     

Preparation of hydrophobic poly(isobutylene) star polymers with hydrophilic poly(propylene imine) dendritic cores

Summary Poly(propylene imine) dendrimers with amino chain ends have been used for the preparation of hydrophobic star polymers with hydrophilic dendritic cores. The unsaturated end groups of polyisobutylene (PIB) were transformed into reactive anhydride end groups by an “ene” reaction with maleic anhydride, and the resulting functionalized PIB was then reacted with dendrimers to afford dendrimer-PIB star copolymers. Received: 20 May 1999/Accepted: 17 June 1999     

Synchrotron X-ray microdiffraction reveals rotational plastic deformation mechanisms in polycrystalline thin films

Understanding the mechanical response of polycrystalline materials on the mesoscopic scale remains a challenge as it is largely determined by grain-to-grain interactions and the discrete underlying microstructure. We conducted in situ synchrotron Laue microdiffraction experiments to map local strain tensors and orientations over polycrystalline thin gold films for different applied biaxial strain states. The experimental results demonstrate stress relaxation to be accompanied by cooperative transport of dislocation density leading to rotational plastic deformation heterogeneities. We propose a disclination model of closed dislocation walls and consider the geometry of transformations corresponding to a Burgers circuit enclosing the multipole disclination configuration. The observed stress-driven rotational deformation of the grain is shown to be described by the change in rotational closure failure associated with a Burgers circuit around the multipole disclination configuration. This concept is further advanced in a non-Euclidian geometry to demonstrate that the observed microrotation is captured by higher-order gradients in a micropolar continuum theory.     

捷克共和国的小水电工程

1捷克共和国发展水电潜能的自然条件 捷克共和国并没有建设水电站理想的自然条件。捷克的许多河流既没有所需的河川坡度，也没有充足的水量。因此，捷克共和国的水电在包括火电和核电的总发电量中的比例，是相当低的。最近由于2002年的洪水造成Vltava河的所谓Vltava梯级电站上的水电站的损坏，这一比例更加小了。     

SAR型模数转换器在电机控制电流测量中的应用

在电机控制系统中,设计者可通过周密分析获得理想的性能,即使开始看上去某些元件不合适.对于来自电流传感器的±5 V输出信号,则需要使用双电源(±12 V)的模数(A/D)转换器,TI公司推出的ADS7864型A/D转换器拥有同样效能,并给出了相关闭环电流互感器的应用.     

Averaging analysis of periodically forced fluid networks

For a lumped parameter model of a flow network driven by a periodic generator, we apply averaging to find an approximate solution and analyze its stability. The approximate solution has three parts: mean flow due to the resistive effects of branches, a time-periodic part due to “inductive” effects, and a mean flow average correction due to the interaction of nonlinear and time varying effects. We present an example that may explain the scenario leading to venous diseases. It is shown that the widening of a branch in a venous network leads to an increase in the AC flow and a decrease in the DC flow through that branch, thus increasing the stress on venous valves, and consequently leading to a further increase in the effective width of the vein.     

Influence of Annealing on the Properties of Explosively Welded Titanium Grade 1—AW7075 Aluminum Alloy Bimetals

Explosive welding of titanium Grade 1 to AW7075 aluminum alloy arranged in parallel setup was performed. The annealing of produced bimetals at the temperatures of 450, 500 and 550 °C for times ranging from 20 to 100 h was carried out after explosive welding. The produced bimetal was characteristic by its wavy interface typical for that bonding process. Increase in the microhardness at the interface was recorded due to work hardening. Delamination of titanium Grade 1 flyer sheet was firstly observed when annealing temperature of 500 °C for 40 h was carried out. Annealing at 550 °C also resulted in delamination of upper sheet. The intermetallic compound (IMC) layer was observed at the interface after annealing of bimetals. The higher the annealing temperature and time, the higher the thickness of continuous IMC layer. The maximum measured thickness of IMC layer averaged 13 µm. Energy dispersive x-ray spectroscopy (EDS) and x-ray diffraction (XRD) analyses revealed that the interface layer is consisted of Al₁₈Ti₂Mg₃ IMC. Microhardness at the interface increased dramatically up to 439 HV0.1 after annealing of bimetal due to the presence of above-mentioned IMC.     

Novel design approach for the creation of 3D geometrical model of personalized bone scaffold

Bone scaffolds provide a structural support for tissue development. Existing bone scaffolds are mainly characterized by complex porous designs whose shortcomings are a low level of permeability for growing tissue, and a difficult design customization. Scaffolds with nucleuses (rods or lattices) as basic elements should improve bone regeneration and enable higher design flexibility. In this paper, we present two new methods for building 3D geometrical models of personalized scaffolds, which are based on method of anatomical features. Methods are demonstrated in the case of scaffold for the mandible bone. This approach greatly reduces the designer effort and time, while enabling easy personalization of scaffolds’ shape and geometry.