Oscillation of a tilted circular pad on a droplet for the self-alignment process

The seesaw-oscillation of a small circular pad on a single droplet was studied both numerically and experimentally. The circular pad with a diameter of 2.0–3.8 mm onto a water or glycerol droplet with a volume of 1–10 μL, and a bottom substrate with a smaller diameter than that of the pad were used in the experiment. The pad was then tilted and then the tilting fixture was quickly removed. The pad alternately oscillated and then finally stabilized in a horizontal position. The numerical model considering the surface tension and the viscous force of the droplet was developed and calculated using the same configurations as those in the experiment. The experimental and numerical data showed good agreement not only in terms of the oscillating frequency and damping ratio but the transient motion of the circular pad and instantaneous droplet surface shape.     

Enhanced strain hardening in elongational viscosity for HDPE/crosslinked HDPE blend. I. Characteristics of crosslinked HDPE

Blending a crosslinked high‐density polyethylene (xHDPE) enhances melt strength and strain hardening behavior in elongational viscosity of high‐density polyethylene (HDPE) to a great degree. Gel fraction of xHDPE has a stronger effect on the strain hardening than sol fraction, although sol fraction also enhances the strain hardening to some degree. Further, the xHDPE crosslinked by peroxide in a compression mold exhibits more pronounced effect than xHDPE by radiation, which is attributed to the difference in the amount of the gel fraction. The xHDPE, which enhances the strain hardening, has sparse crosslink points in the network. Moreover, it was found from linear viscoelastic measurements, such as oscillatory modulus and relaxation modulus, that the xHDPE is characterized as a critical gel, which was also supported by the result of tensile testing. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 73–78, 2002     

Effect of molecular weight on molecular orientation and morphology of polypropylene sheets containing a β-nucleating agent

In this study, polypropylene (PP) films containing the β nucleating agent, N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide, were prepared using PP with three different molecular weights (low, medium, and high) by extrusion process with T-shaped die. The structure and morphology of the films were studied after stretching. It was found that a unique molecular orientation, in which both the c-axis and crystalline lamellae were oriented perpendicular to the flow direction, was formed in all undrawn film samples, irrespective of the molecular weights of the PP. In the PP sheets stretched in the machine direction, the low-molecular-weight sample containing the nucleating agent exhibited brittle properties owing to a lack of tie chains in the stretching direction. In contrast, cavitation was prominent in the medium (M-PP)- and high (H-PP)-molecular-weight samples. Notably, M-PP containing the nucleating agent, with a high degree of molecular orientation, promoted the formation of a large number of voids. In H-PP containing the nucleating agent, the presence of numerous tie chains inhibited cavitation, resulting in fewer voids. The experimental results demonstrated the influence of the molecular weight on the void structure, which will be useful in the field of microporous membranes.     

Effects of Some Light Alloying Elements on the Oxidation Behavior of Fe and Ni-Cr Based Alloys During Air Plasma Spraying

The oxidation behavior of iron binary powders with addition of Si (1, 4 wt.%) and B (1, 3 wt.%) and that of a Ni-Cr based alloy powder with Si (4.3 wt.%), B (3.0 wt.%), and C (0.8 wt.%) additions during atmosphere plasma spray (APS) have been investigated. Analysis of the chemical composition and phases of oxides in the captured in-flight particles and deposited coatings was carried out. The results show that the addition of Si and B to iron effectively reduced the oxygen contents in the coatings, especially during the in-flight period at higher particles temperature. Ni-Cr based alloy powder with Si, B, and C additions reduced the oxidation of the base alloys significantly. Preferential oxidation and subsequent vaporization of Si, B, and C from the surface of the sprayed particles are believed to play a major role in controlling oxidation in the APS process.     

The effects of air pollution and climatic factors on atmospheric corrosion of marble under field exposure

The atmospheric corrosion of marble was evaluated in terms of SO₂ concentration as air pollution and climatic factors such as rainfall, relative humidity, temperature and so on under the field exposure. Marble of calcite type (CaCO₃) was exposed to outdoor atmospheric environment with and without a rain shelter at four test sites in the southern part of Vietnam for 3-month, 1- and 2-year periods from July 2001 to September 2003. The thickness loss of marble was investigated gravimetrically. X-ray diffraction and X-ray fluorescent methods were applied to study corrosion products on marble. The corrosion product of marble was only gypsum (CaSO₄ · 2H₂O) and was washed out by rain under the unsheltered exposure condition. It was found that the most substantial factors influencing the corrosion of marble were rainfall, SO₂ concentration in the air and relative humidity. Based on the results obtained, we estimated the dose-response functions for the atmospheric corrosion of marble in the southern part of Vietnam.     

EXAFS Study on Structural Change of Charcoal-supported Ruthenium Catalysts during Lignin Gasification in Supercritical Water

Lignin gasification in supercritical water over charcoal supported ruthenium trivalent salts was studied using a batch reactor at 673 K. Ruthenium (III) nitrosyl nitrate on charcoal (Ru(NO)(NO₃)₃/C) was more active than ruthenium (III) chloride on charcoal (RuCl₃/C) for the gasification reaction. EXAFS analysis revealed that ruthenium metal particles were formed in both RuCl₃/C and Ru(NO)(NO₃)₃/C catalysts during the lignin gasification and that the size of ruthenium metal in Ru(NO)(NO₃)₃/C was smaller than that in RuCl₃/C. It was concluded that well-dispersed ruthenium metal particles were active for the lignin gasification in supercritical water.     

Enhancement of melt elasticity for poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) by addition of weak gel

Rheological properties in a molten state are studied extensively for poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate), PHB‐HV, with a small amount of crosslinked poly(epichlorohydrin), PECH, having low density of crosslink points. It is found that adding 2 wt % of xPECH greatly enhances the melt elasticity of PHB‐HV, one of the serious defects of microbial PHB, whereas it has no effect on the shear viscosity. As a result, viscoelastic nature, and thus processability, of PHB‐HV can be controlled by blending the crosslinked PECH. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of heating process on the formation of nanoparticles of elastin model polypeptide, (GVGVP)251, by gamma-ray crosslinking

Nanoparticles were prepared by the thermosensitive aggregation of the elastin model polypeptide, (GVGVP)₂₅₁, and gamma-ray crosslinking. Three different heating processes, “slow heating,” “fast heating,” and “heat shock,” were used for the aggregation of the peptide, followed by gamma-ray crosslinking. Only the “heat shock” process successfully yielded stable nanoparticles with diameters of less than ca. 150 nm and a narrow size distribution. Circular dichroism (CD) spectrometry showed that this polypeptide formed a type-II β-turn structure when the temperature was increased to above the cloudy point in the case of the “heat shock” process; suggesting that this structure might contribute to stable nanoparticle formation by gamma-rays. CD spectrometry also suggested that this structure would be affected during the formation of stable crosslinked particles.     

Chemical Synthesis of a Synthetic Analogue of the Sialic Acid‐Binding Lectin Siglec‐7

As a basis for the development of an artificial carbohydrate‐binding lectin, we chemically synthesized a domain of siglec‐7, a well‐characterized sialic‐acid‐binding lectin. The full polypeptide (127 amino acids) was constructed by sequential native chemical ligation (NCL) of five peptide segments. Because of poor cysteine availability for NCL, cysteine residues were introduced at suitable ligation sites; these cysteine residues were alkylated in order to mimic native glutamine or asparagine residues, or converted to an alanine residue by desulfurization after NCL. After folding the full‐length polypeptide, the sialic‐acid‐binding activity of the synthetic siglec‐7 was clearly demonstrated by STD NMR and ELISA experiments. We succeeded in the synthesis of siglec‐7 by installing three extra cysteine residues with side‐chain modifications and found that these modifications did not affect the binding activity.