一种派生式与创成式相结合的CAPP系统

本文结合为某机械厂开发的实用计算机辅助工艺设计系统(JJCAPP),论述了一种兼有派生式和创成式特点的综合式工艺自动设计方法.     

宣钢近北庄铁矿露采边坡稳定的结构分析

以宣钢近北庄铁矿露采边坡稳定性研究为例，说细说明了岩体结构分析方法的应用。     

钨铜合金药型罩及其性能

钨铜合金药型罩的应用可以提高射流对均质钢靶的侵彻能力.这一提高得益于射流密度的提高以及断裂时间的延长. 本文对钨铜合金射流及其断裂形态通过X光照像进行了研究.它的旋转效应及其炸高特性也进行了实验研究. 钨铜合金药型罩的威力实验在φ30 mm的破甲弹上进行.在相同装药条件下与紫铜罩相比,威力提高20～30%.     

2,3,4- or 2,3,5-trisubstituted furans: catalyst-controlled highly regioselective ring-opening cycloisomerization reaction of cyclopropenyl ketones

2,3,4- or 2,3,5-trisubstituted furans were highly regioselectively formed from the cycloisomerization reaction of the same starting cyclopropenes 1 via the subtle choice of the transition metal halides. Under the catalysis of 5 mol % PdCl2(CH3CN)2, 2,3,5-trisubstituted furans 2 were given in 50-88% yields with 95-99% regioselectivities, while 2,3,4-trisubstituted furans 3 were formed in 78-96% yields with 99% regioselectivities under the catalysis of 5 mol % CuI.     

Hydrothermal Synthesis of Acicular Lead Titanate Fine Powders

A pure, acicular lead titanate (PbTiO₃) fine powder with a white color has been prepared by hydrothermal synthesis. It is a new phase of PbTiO₃ with I 4 symmetry, cell parameters of a = 12.358 Å and b = 14.541 Å, and a density of 6.80 g.cm⁻³. The influences of pH (12.5 to 14.4), Pb/Ti ratio (1.0 to 1.6) in the feedstock, reaction temperature (130° to 230°C), time (0.25 to 4 h), starting materials, and additives on the formation of acicular PbTiO₃ under hydrothermal conditions have been investigated. The acicular PbTiO₃ with I 4 symmetry, referred to as the PX phase, can be converted to the perovskite-type (PE phase) of PbTiO₃ at about 605°C while its acicular morphology is essentially unchanged. The preferable conditions for preparing pure acicular PX-phase PbTiO₃ are that the pH is 13.0 to 14.0, Pb/Ti ratio is >1.3, reaction temperature is 170° to 200°C, time is 0.5 to 1.0 h, titanium butoxide (Ti[O(CH₂)₃CH₃]₄) is the starting material, and poly(vinyl alcohol) is an additive. The acicular grain of the PX phase is usually less than 100 nm in diameter and more than 1000 nm in length.     

自发参量下转换光场的实验研究进展综述

自发参量下转换(spontaneous parametric down-conversion,SPDC)光场是基于单色泵浦光子流和量子真空噪声对非线性晶体的综合作用而产生的,它固有的量子起源决定了在非经典光场研究中的重要地位和作用.对SPDC光场的相干特性和它在绝对测量光电探测器量子效率中的应用进行了深入而细致的研究和探讨.     

Analytical determination of intrinsic permeability of synthetic nonwoven filter fabrics

In this paper an analytical method for determining the permeability of nonwoven filter fabrics is presented. The derived formula shows that the intrinsic permeability, fully characterizing the porous medium, depends on fabric porosity, n, fibre diameter, d, and a shape factor determined experimentally.     

HYQ-965-Ⅲ解堵剂的研制及现场应用

针对涠洲11-4油田W11-4D-A1井返吐油基泥浆堵塞油管问题,以渗透剂、乳化剂、分散剂、互溶剂为原料,制备了HYQ-965-Ⅲ解堵剂.考察了不同配方解堵剂中原料间的配伍性和溶垢效果,研究了最佳配方:渗透剂Ⅰ20%、乳化剂Ⅰ10%、分散剂10%、互溶剂10%、海水50%.将该解堵剂在W11-4D-A1井进行应用,从现场使用情况看,HYQ-965-Ⅲ对油基泥浆、原油具有很好的分散能力,成功解除了油管堵塞,达到预期设计要求.     

氮气氛下LTCC基板Cu共烧金属化研究

从PMMA型LTCC素坯膜的制备和PMMA的排胶机理两方面，研究了LTCC基板Cu共烧金属化。结果表明，采用PMMA作为粘结剂的流延浆料具有剪切变稀行为，所得的流延坯膜微观组织均匀，叠压后坯体内部无分层现象。热失重、差热和傅立叶红外光谱联用分析结果表明高纯N2气氛中PMMA以解聚机理热解，热解后释放的主要产物为丙烯酸甲酯。在高纯N2气氛中LTCC与Cu共烧后Cu金属化膜平整、致密，连通良好。经测试，基板表面Cu导体方阻小于5mΩ/□。