Ethylene-propylene copolymers by a supported Ziegler-Natta catalyst based on TiCl4/MgCl2

Ethylene-propylene copolymers have been prepared by using Ziegler-Natta catalysts based on TiCl₄, MgCl₂, PCl₃ and (n-Bu)₃PO₄. The catalysts TiCl₄/MgCl₂/PCl₃ and TiCl₄/MgCl₂/(n-Bu)₃PO₄ were prepared by reacting TiCl₄ with pretreated MgCl₂. The support was prepared by ball milling of MgCl₂ with varied amounts of PCl₃ or (n-Bu)₃PO₄. The addition of PCl₃ has remarkably increased the MgCl₂ surface area in comparison with (n-Bu)₃PO₄. The effects of PCl₃ and (n-Bu)₃PO₄ on ethylene homopolymerization, ethylene-propylene copolymerization and on copolymer properties were evaluated. The catalyst system containing PCl₃ permitted to synthesize propylene-ethylene copolymers with up to 75% (w/w) of propylene and provided control of copolymer crystallinity. The reduction of the copolymer molecular weight distribution suggested that PCl₃ acted as an internal donor, poisoning some active catalytic sites. Received: 2 April 1997/Revised: 6 June 1997/Accepted: 18 June 1997     

Study of the thermomechanical and electrical properties of conducting composites containing natural rubber and carbon black

This work describes the preparation and characterization of composite materials obtained by the combination of natural rubber (NR) and carbon black (CB) in different percentages, aiming to improve their mechanical properties, processability, and electrical conductivity, aiming future applications as transducer in pressure sensors. The composites NR/CB were characterized through optical microscopy (OM), DC conductivity, thermal analysis using differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMA), thermogravimetry (TGA), and stress–strain test. The electrical conductivity varied between 10^?9 and 10 S m^?1, depending on the percentage of CB in the composite. Furthermore, a linear (and reversible) dependence of the conductivity on the applied pressure between 0 and 1.6 MPa was observed for the sample with containing 80 wt % of NR and 20% of CB. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Nickel Activation for Hydrogenolysis Reaction on USY Zeolite

The effects of the SAR (14 and 38) and of the methodology of introduction of nickel (wetness impregnation and ion exchange) on catalyst activation were investigated in Ni/USY model catalysts submitted to two activation treatments: reduction (A) and reduction/calcination/reduction, successively (B). the catalysts prepared by wetness impregnation, a marked increase in the catalytic activity after treatment B was observed. On the basis of the catalyst efficiency toward ethane hydrogenolysis, the lower SAR catalyst presents a threefold higher activity. On the contrary, the catalysts prepared by ion exchange, as well as a model catalyst prepared by wetness impregnation over a USY exhaustively exchanged with nickel ions, do not present measurable increasing of the catalytic activity under the same activation conditions. Monitoring the catalyst activation by EXAFS indicates the formation of nickel clusters in the impregnated catalysts after activation treatment B, which should be responsible for the high catalytic activity. However, TEM images reveal a bimodal particle size distribution, with large (ca. 20 nm) and small nickel particles. Temperature-programmed reduction performed under the same conditions of catalyst activation suggests that only the small nickel particles are activated under the experimental conditions adopted in this work.     

Dielectric behavior of PVDF/POMA blends that have a low doped POMA content

The real (ε′) and imaginary (ε″) components of the complex permittivity of blends of PVDF [poly(vinylidene fluoride)] with POMA [poly(o‐methoxyaniline)] doped with toluenosulfonic acid (TSA) containing 1, 2.5, and 5 wt % POMA–TSA were determined in the frequency interval between 10² and 3 × 10⁶ Hz and in the temperature range from ?120 up to 120°C. It was observed that the values of ε′ and ε″ had a greater increase with the POMA–TSA content and with a temperature in the region of frequencies below 10 kHz. This effect decreased with frequency and it was attributed to interfacial polarization. This polarization was caused by the blend heterogeneity, formed by conductive POMA–TSA agglomerates dispersed in an insulating matrix of PVDF. The equation of Maxwell–Garnett, modified by Cohen, was used to evaluate the permittivity and conductivity behavior of POMA–TSA in the blends. A strong decrease was observed in POMA–TSA conductivity in the blend, which was bigger the lower the POMA–TSA content in the blend. This decrease could have been caused either by the POMA dedoping during the blend preparation process or by its dispersion into the insulating matrix. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 752–758, 2003     

Modification of porous copolymers network based on acrylonitrile

Summary The preparation of a chelating ion-exchange network based on acrylonitrile was carried out by chemical modification with hydroxylamine. The beads of resin were synthesized by aqueous suspension copolymerization of acrylonitrile (AN), styrene (STY) and divinylbenzene (DVB). The influence of diluent used in the suspension polymerization on the structure of the resulting copolymers was evaluated. The diluents employed were heptane (HEP), toluene (TOL) and anisole (ANI). It was found that the AN incorporation into copolymer structure was dependent on the diluent used. Conversion of nitrile groups into the amidoxime was conducted by treatment with hydroxylamine under alkaline solution. The resins were characterized by apparent density, surface area, average pore diameter, elemental analysis (CHN), FTIR and optical microscopy. Based on the results obtained, it was possible to control the porosity by diluent employed in the synthesis and to modify chemically a resin containing nitrile groups by hydroxylamine reaction. Received: 6 October 2001/Revised version: 2 April 2002/ Accepted: 11 April 2002     

The effect of H2 treatment on the activity of activated carbon for the oxidation of organic contaminants in water and the H2O2 decomposition

In this work, hydrogen peroxide reactions, i.e. H₂O₂ decomposition and oxidation of organics in aqueous medium, were studied in the presence of activated carbon. It was observed that the carbon pre-treatment with H₂ at 300, 500, 700 and 800 °C resulted in an increase in activity for both reactions. The carbons were characterized by BET nitrogen adsorption, thermogravimetric analyses (TG), temperature programmed reduction (TPR), electron paramagnetic resonance (EPR), iodometric titration and determination of the acid/basic sites. TPR experiments showed that activated carbon reacts with H₂ at temperatures higher than 400 °C. The treatment produces a slight increase in the surface area. EPR analyses indicate the absence of unpaired electrons in the carbon. Iodometric titrations and TG analyses suggested that the treatment with H₂ generates reduction sites in the carbon structure, with concentration of approximately 0.33, 0.53, 0.59, 0.65 and 0.60 mmol/g for carbons treated at 25, 300, 500, 700 and 800 °C, respectively. It was also observed the appearance of basic sites which might be related to the reduction sites. It is proposed that these reducing sites in the carbon can activate H₂O₂ to generate HO^* radicals which can lead to two competitive reactions, i.e. the hydrogen peroxide decomposition or the oxidation of organics in water.     

A mixed helix--beta-sheet model of the transmembrane region of the nicotinic acetylcholine receptor

We have modelled the transmembrane region of the 7 nicotinicacetylcholine receptor as a mixed -helical/ß-sheetstructure. The model was mainly based on the crystal structureof a pore-forming toxin, heat-labile enterotoxin. This is apentameric protein having a central pore or channel composedof five -helices, one from each of the 5 B subunits that formthis pentamer. The remainder of this structure is ß-sheet,loops and a short -helix, not included in the model. The modeluses this channel as a template to build the transmembrane region,from M1 to the middle of M3. The remainder of M3 and M4 werebuilt de novo as -helices. Great consideration was given tolabelling data available for the transmembrane region. In generalterms, the shape of the model agrees very well with that obtainedindependently by electron microscopic analysis and the secondarystructure predicted by the model is in accord with that estimatedindependently by Fourier transform infrared spectroscopy. TheM2 helical region of the model is only slightly kinked, contraryto what is inferred from electron microscopic analysis, buthas the same overall shape and form. On the membrane face ofthe model, the presence of deep pockets may provide the structuralbasis for the distinction between annular and non-annular lipidbinding sites. Also, the transmembrane region is clearly asymmetricin the direction perpendicular to the membrane, and this mayhave strong influence on the surrounding lipid composition ofeach leaflet of the cytoplasmic membrane.     

Synthesis, characterization and crystal structure of a novel thiocyanate–ruthenium(II) complex

The cis-[Ru(dppb)(Me-bipy)(NCS)₂], dppb = 1,4-bis (diphenylphosphino)butane, Me-bipy = 4,4′-dimethyl-2,2′-bipyridine, and NCS = thiocyanate, was synthesized and characterized by spectroscopic and electrochemical techniques and its structure was determined by crystal X-ray analysis. The crystal structure reveals that the coordination geometry around the Ru(II) center is distorted octahedron where two molecules of thiocyanate are bonded to the ruthenium through nitrogen atom in cis orientation. The half-wave formal potential value E_1/2 = 0.8 V (versus Ag/AgCl) observed is considerable higher than that for the cis-[RuCl₂(dppb)(Me-bipy)] complex, E_1/2 = 0.6 V (versus Ag/AgCl), well illustrating the strong π-acceptor effect the NCS ligand toward the backbonding interaction with the Ru(II) metal center. The MLCT absorption bands of the thiocyanate complex present a higher molar absorptivity (about 12%) compared with the cis-[RuCl₂(dppb)(Me-bipy)] complex, in the same experimental conditions. These properties make the complex potentially promising for the photosensitization process.     

Rheological and morphological properties of high‐density polyethylene and poly(ethylene–octene) blends

The rheological and morphological properties of blends based on high‐density polyethylene (HDPE) and a commercial ethylene–octene copolymer (EOC) produced by metallocene technology were investigated. The rheological properties were evaluated in steady and dynamic shear experiments at 190°C in shear rates ranging from 90 s^?1 to 1500 s^?1 and frequency range between 10^?1 rad/s and 10² rad/s, respectively. These blends presented a high level of homogeneity in the molten state and rheological behavior was generally intermediate to those of the pure components. Scanning electron microscopy (SEM) showed that the blends exhibit dispersed morphologies with EOC domains distributed homogeneously and with particle size inferior to 2 μm. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2240–2246, 2002