Leave-one-out cross-validation-based model selection for multi-input multi-output support vector machine

As an effective approach for multi-input multi-output regression estimation problems, a multi-dimensional support vector regression (SVR), named M-SVR, is generally capable of obtaining better predictions than applying a conventional support vector machine (SVM) independently for each output dimension. However, although there are many generalization error bounds for conventional SVMs, all of them cannot be directly applied to M-SVR. In this paper, a new leave-one-out (LOO) error estimate for M-SVR is derived firstly through a virtual LOO cross-validation procedure. This LOO error estimate can be straightway calculated once a training process ended with less computational complexity than traditional LOO method. Based on this LOO estimate, a new model selection methods for M-SVR based on multi-objective optimization strategy is further proposed in this paper. Experiments on toy noisy function regression and practical engineering data set, that is, dynamic load identification on cylinder vibration system, are both conducted, demonstrating comparable results of the proposed method in terms of generalization performance and computational cost.     

Enhanced Photocatalytic Hydrogen Evolution Over CaTi1−x Zr x O3 Composites Synthesized by Polymerized Complex Method

The solid solution of CaTi_1−x Zr _x O₃ (x = 0–0.15) was successfully synthesized by the polymerized complex (PC) method. This study has exhibited the advantage of the PC method to prepare a highly active CaTiO₃ compared with the conventional solid-state reaction (SSR) method. More importantly, further improvement in phase purity and large surface area was achieved by the doping of Zr⁴⁺, leading to remarkable enhancement of photocatalytic activities compared to pure CaTiO₃. The quantum yield for H₂ evolution over the most active photocatalyst, Pt (1.0 wt%)/CaTi_0.93Zr_0.07O₃, was 1.91% and 13.3% in photoreactions from pure water and aqueous ethanol solution, respectively for 0.1 g photocatalyst, which was about 3.3 and 2.5 times compared to that of PC-derived CaTiO₃.     

MFE环氧乙烯基酯树脂固化性能的研究

本文对MFE环氧乙烯基酯(含MFE型和AFE型二种型号)树脂的固化性能(凝胶时间、放热峰和固化收缩率)作了报道并进行讨论。     

半圆电极对测量壁面处的湍流速度梯度脉动

壁面处湍流速度梯度脉动的测量对于深入了解壁面附近湍流的结构和传热、传质是很重要的.本文叙述了电化学法测量的原理,介绍了用一半圆电极对同时测量壁面上二维湍流速度梯度脉动的方法和测量结果.在直径0.194m的充分发展圆管湍流中,用碘和碘化钾溶液作为流动介质,半圆电极对直径为5×10~-4m,测得壁面处轴向和周向速度梯度的湍流脉动强度分别为0.3—0.33和0.11—0.12.     

焙烧硫酸铁铵催化合成季戊四醇双缩苯甲醛

以硫酸铁铵经600℃高温焙烧制得一类新型固体酸催化剂，该催化剂在合成季戊四醇双缩苯甲醛中具有较高的催化活性，其优化条件是：苯甲醛与季戊四醇物质的量比为2．0：1，催化剂用量为5％(以醇的质量为准)，回流温度83℃，反应时间2．5h，在此优化条件下，反应产率为87％。且催化剂容易制备，可连续使用。     

Preparation of Whisker β-Spodumene Glass–Ceramics

β-spodumene glass–ceramics with a whisker-like microstructure were prepared from the following materials (in wt%): 64.5 SiO₂, 18.0 Al₂O₃, 4.2 Li₂O, 4 ZrO₂, and 8 MgF₂. Scanning electron microscope (SEM) analysis showed that phase separation in the base glass leads to the formation of a primary crystal phase of MgF₂ that promotes the formation of spherical β-spodumene. Whisker spodumene crystals surrounded by spherical crystals are observed at 720°C after 1 h, and the whisker crystals grow at the cost of spherical crystals with increasing temperature and time. The flexural strengths of the glass–ceramics reach a maximum of 228 MPa after heat treatment at 850°C for 1 h.     

Adaptive recurrent neural network control of uncertain constrained nonholonomic mobile manipulators

In this article, motion/force control problem of a class of constrained mobile manipulators with unknown dynamics is considered. The system is subject to both holonomic and nonholonomic constraints. An adaptive recurrent neural network controller is proposed to deal with the unmodelled system dynamics. The proposed control strategy guarantees that the system motion asymptotically converges to the desired manifold while the constraint force remains bounded. In addition, an adaptive method is proposed to identify the contact surface. Simulation studies are carried out to verify the validation of the proposed approach.     

紫砂壶的装饰工艺

紫砂壶是我国灿烂艺术宝库中的一枝奇葩，除了紫砂材质的特异外，其装饰工艺也是有别于其它陶瓷的，是紫砂从艺的先辈们经长期摸索、总结的一整套非常严谨科学的制陶装饰工艺，随着时代在进步，装饰工艺也出现了发展与创新。     

缩合型室温硫化硅橡胶耐热性的研究进展

从硅橡胶的分子结构分析了其耐热性优于普通橡胶的原因及热老化机理，并比较了几种硫化体系的缩合型室温硫化硅橡胶的耐热性，着重介绍了国内外提高室温硫化硅橡胶耐热性的方法和研究进展。