Insoluble Vascular Amyloid Deposits Trigger Disruption of the Neurovascular Unit in Alzheimer’s Disease Brains

Alzheimer’s disease (AD) is a neurodegenerative disease, characterized histopathologically by intra-neuronal tau-related lesions and by the accumulation of amyloid β-peptide (Aβ) in the brain parenchyma and around cerebral blood vessels. According to the vascular hypothesis of AD, an alteration in the neurovascular unit (NVU) could lead to Aβ vascular accumulation and promote neuronal dysfunction, accelerating neurodegeneration and dementia. To date, the effects of insoluble vascular Aβ deposits on the NVU and the blood–brain barrier (BBB) are unknown. In this study, we analyze different Aβ species and their association with the cells that make up the NVU. We evaluated post-mortem AD brain tissue. Multiple immunofluorescence assays were performed against different species of Aβ and the main elements that constitute the NVU. Our results showed that there are insoluble vascular deposits of both full-length and truncated Aβ species. Besides, insoluble aggregates are associated with a decrease in the phenotype of the cellular components that constitute the NVU and with BBB disruption. This approach could help identify new therapeutic targets against key molecules and receptors in the NVU that can prevent the accumulation of vascular fibrillar Aβ in AD.     

Molecular Mechanisms of the Deregulation of Muscle Contraction Induced by the R90P Mutation in Tpm3.12 and the Weakening of This Effect by BDM and W7

Point mutations in the genes encoding the skeletal muscle isoforms of tropomyosin can cause a range of muscle diseases. The amino acid substitution of Arg for Pro residue in the 90th position (R90P) in γ-tropomyosin (Tpm3.12) is associated with congenital fiber type disproportion and muscle weakness. The molecular mechanisms underlying muscle dysfunction in this disease remain unclear. Here, we observed that this mutation causes an abnormally high Ca²⁺-sensitivity of myofilaments in vitro and in muscle fibers. To determine the critical conformational changes that myosin, actin, and tropomyosin undergo during the ATPase cycle and the alterations in these changes caused by R90P replacement in Tpm3.12, we used polarized fluorimetry. It was shown that the R90P mutation inhibits the ability of tropomyosin to shift towards the outer domains of actin, which is accompanied by the almost complete depression of troponin’s ability to switch actin monomers off and to reduce the amount of the myosin heads weakly bound to F-actin at a low Ca²⁺. These changes in the behavior of tropomyosin and the troponin–tropomyosin complex, as well as in the balance of strongly and weakly bound myosin heads in the ATPase cycle may underlie the occurrence of both abnormally high Ca²⁺-sensitivity and muscle weakness. BDM, an inhibitor of myosin ATPase activity, and W7, a troponin C antagonist, restore the ability of tropomyosin for Ca²⁺-dependent movement and the ability of the troponin–tropomyosin complex to switch actin monomers off, demonstrating a weakening of the damaging effect of the R90P mutation on muscle contractility.     

Adsorption of dissolved organics from industrial effluents on to activated carbon

Industrial effluents usually include multicomponent organic solutes. The optimum pH for adsorption of a specific industrial effluent on activated carbon should be determined experimentally because, in general, more than one mechanism is involved. A series of experiments was conducted to establish the influence of the initial hydrogen ion concentration on carbon adsorption of organic solutes. For these studies, powdered activated carbon was used, and the water systems studied included both single component pure organic compounds as well as multicomponent organic wastes. Results indicate that the pH effect upon the effectiveness of carbon adsorption mainly depends upon the nature of the adsorbed substance. In general, the degree of ionisation is the controlling factor for adsorption of ionic organic solutes on activated carbon. Adsorption reaches a maximum at the point of least ionisation of the adsorbate. As the organic compounds become more complex (i.e. longer hydrocarbon chains, higher molecular weights, increased branching), the electrical adsorption forces between activated carbon and ionic organic solutes will govern. Anionic surfactants meet with decreased electronegative repulsive forces at low pH levels, which increase the effectiveness of carbon adsorption. However, the adsorption of a cationic surfactant is increased by an increase in the electronegative carbon surface at high pH levels. When ionic organic solutes become much more complex, like a polymer, the effects of both ionisation and electrical adsorption forces become less important. Instead, the adsorption rate will be controlled by the extent of hydrolysis caused by the pH adjustment. For non-ionic organic solutes, chemical reaction(s) between the adsorbate and the added chemical (acid or base) for pH adjustment is an important controlling factor. Again, hydrolysis is responsible for the breakdown of larger size molecules to smaller sizes. Then an increase in adsorption rate with decreasing molecular weight of adsorbate is expected.     

A STUDY ON THE PERFORMANCE OF THE CATALYTIC POROUS-WALL THREE-PHASE REACTOR

A theoretical investigation of a catalytic porous-wall reactor in which gaseous and liquid reactants approach each other from opposite sides of the catalyst is undertaken. Equations for the annular liquid-channel are coupled with those for the catalytic wall and solved numerically and analytically using a simplified model. For the model reaction under study, the main design and operation parameters which affect reactor performance are the Thiele modulus, Peclet number, width of the liquid channel and the inlet concentration of the reactant in the liquid phase.

The effect of reactor configuration is peculiar to the cylindrical geometry because the thickness and relative location of the catalytic wall as well as the selection of the liquid and gas channels can influence the reactor performance. Thin-walled catalyst tubes have larger effectiveness factors and as the tube radius approaches that of the reactor, conversion in the reactor increases especially when the liquid is saturated with the gaseous reactant. Concentration of the liquid reactant in the feed has a significant effect if the reactant is depleted at some point inside the catalyst wall. Since the reaction zone width can be adjusted by changing the feed composition, this might have important implications with respect to selectivity.     

Adhesion Mechanisms of Polyurethanes to Glass Surfaces I. Structure-Property Relationships in Polyurethanes and Their Effects on Adhesion to Glass

Polyurethanes were prepared from toluene diisocyanate (TDI), 1-4-butane diol (BDO) and polycaprolactone-based triols with varying molecular weights. Among each molecular weight triol-based urethane, hard segment content was varied from 20% to 70%. Differential scanning calorimetry, tensile testing, and Iosipescu shear testing were done on all the various urethanes prepared. Thermal characterization data revealed the dependence of phase separation on hard segment content as well as on the triol molecular weight. Tensile data and Iosipescu shear data further confirmed the observations made from the DSC data. The data further indicated that phase separation can greatly improve the modulus of cross-linked segmented urethanes. Adhesion of these urethanes to glass surface was evaluated using soda-lime float glass plate. Urethane samples were cast on the air side of the glass plates and adhesion was measured in shear mode. Adhesion data indicated that in addition to hard segment content, modulus, cross-link density, and molecular weight of the triols, phase separation seems to be a major factor in controlling adhesion. Surfaces of the failed adhesion samples were also analyzed and the failure mode was found to be cohesive, in varying degree, with the different urethane systems.     

Some aspects of the analysis of coal by X-ray fluorescence spectroscopy

Bituminous coal samples from 84 distinct sources were analysed by conventional British Standards (BS) methods for phosphorus, sulphur, chlorine, ash and the ash-forming elements (calcium, silicon, aluminium, iron, sodium, magnesium, potassium, titanium and manganese). In most cases four determinations were made per element per source. Samples were crushed to ?212 μm (72 BS mesh) and pressed into aluminium cups at 20 t in^?2 (309 MPa) without binder or backing. Two pellets from each sample were analysed by wave-length dispersive X-ray fluorescence techniques, using a spectrometer equipped with a rhodium rube; the X-ray count took 60 s. The X-ray results were calibrated against the conventional results using multiple regression. The accuracy obtained was comparable with routine ‘wet chemical’ techniques. The X-ray technique is suitable for the routine determination of large numbers of samples.     

Inactivation of Giardia muris Using Ozone and Ozone-Hydrogen Peroxide

The disinfection effects of the ozone molecule alone and that of ozone decomposition products when inactivating Giardia muris cysts were investigated at bench-scale using two different ozone demand-free laboratory buffer systems. The first water was a 0.05 M phosphate buffer with hydrogen peroxide added at a 10:1 weight ratio. The second water was a 0.05 M phosphate – 0.01 M bicarbonate buffer which quickly scavenged radical species from ozone decomposition. The C3H/HeN mouse model was used to assess the infectivity of ozone treated cysts.

The phosphate-bicarbonate buffer system had significantly greater (P ≤ 0.05) inactivation of G. muris cysts than that observed in the phosphate buffer – peroxide system where ozone was completely decomposed in less than 120 s. Consequently, the design of ozone disinfection processes should maintain ozone residual for disinfection prior to the addition of hydrogen peroxide for the oxidation of other compounds.     

Study of stability of high‐temperature polyimides using TG/MS technique

The oxidative stability of the carbon fiber‐reinforced composite of polyimide was examined, in real time, using the evolved gas analysis techniques. Off‐gas degradation products suggested the onset temperature for chain scissions to be fairly low at about 190–220°C. Based on the off‐gas products present and the trend of their release, the composite degradation mechanism appeared to be similar between 190 and 371°C, thereby marking 371°C to be the highest accelerated aging temperature for its long‐term lifetime prediction. Beyond 371°C, different degradation mechanisms would apply. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1219–1227, 2002     

An Optimization Approach for Assessing the Reliability of Rainwater Harvesting

This study was aimed at developing an optimization approach to rainwater harvesting (RWH) considering three (3) water consumption scenarios (WCS). These scenarios which include basic water need (BWN), pour flush (PF) and full plumbing connection (FPC) corresponding to 50 litres per capita per day (lpcd), 75(lpcd) and 150(lpcd) respectively were simulated for different categories of buildings. Reliability of supply was determined by first obtaining composite surplus/deficit of rainwater followed by optimizing the redistribution of surplus rainwater harvested to deficient buildings. Results showed that when total annual rainfall intercepted by roof exceeded total demand, 100% reliability of water supply was guaranteed. Reliability was found to be a linear function of storage. When reliability of supply is possible, the optimized storage bears an inverse exponential relationship to the roof plan area per capita. The relationship between surplus/deficit and roof plan area per capita follows a one-phase decay pattern. An optimal redistribution of surplus water from self-sufficient buildings to deficient ones gave an improvement in supply reliability from 64 to 87% for basic water need, 47 to 58% for pour flush and 28 to 29% for full plumbing connection.