Theoretical investigation to thermal equilibrium concentration of point defect through first-principles calculation

First-principles calculations based on density functional theory enable us to quantify the thermal equilibrium concentration of a point defect through calculating the formation energy of the defect. In order to know the formation energy, we need three parameters: the energy difference between defective and perfect systems, chemical potential of constitutive atoms and Fermi level. The energy difference is obtained from calculations based on “supercell method”. The energy of a supercell with a charged defect should be corrected by an appropriate way such as alignment of electrostatic potential. The chemical potential and Fermi level can be fixed from conditions of phase equilibrium and charge neutrality.     

Characteristics of porous polymer composite columns prepared by radiation cast-polymerization

Porous polymer composite columns having porous structure were prepared by radiation cast-polymerization of hydrophilic monomers at low temperature and their characteristics were studied. The porosity of the polymer increased with decreasing monomer concentration. The elution time of water in the polymer column increased with increasing monomer concentration and with decreasing irradiation temperature. The elution time was dependent on the degree of hydration of the polymer. The polymer with a degree of hydration of 0.2 to 0.4 gave the minimum elution time. The elution time decreased with the addition of porous inorganic substances.     

Transport of single cells using an actin bundle-myosin bionanomotor transport system

The potential of using actin bundles for the transport of liposomes and single cells across myosin-coated surfaces is investigated. Compared to that observed with filamentous actin, the liposome transport using actin bundles was more linear in nature and able to occur over longer distances. Bundles, but not filamentous actin, were capable of moving single cells. Cargo unloading from bundles was achieved by incubation with Triton X-100. These data suggest that actin bundling may improve the ability of the myosin motor system for nanotransport applications.     

Development of gap sensing system for narrow gap laser welding

Narrow gap welding with an oscillation laser beam is one of the effective processes for thick plate welding. To put this welding process into practical manufacturing, a groove-sensing system using image processing for narrow gap welding with an oscillation laser beam is used. This developed system uses still images of the weld zone taken by a coaxial CMOS camera. It can recognize the position of the groove wall by analysing the brightness distribution in the still image. It can then control the oscillation width and the laser-irradiated area by calculating the groove width and the groove centre position. Some narrow gap welding experiments were performed to evaluate the performance of the developed system. The results revealed that the developed system is effective for narrow gap welding with an oscillation laser beam. Using this system, the narrow gap groove can be welded even if the groove width has changed during the welding process.     

Performance of SOR methods on modern vector and scalar processors

The building-cube method (BCM) is a new generation algorithm for CFD simulations. The basic idea of BCM is to simplify the algorithm in all stages of flow computation to achieve large-scale simulations. Calculation of a pressure field using the Successive Over Relaxation (SOR) method consumes most of the total execution time required for BCM. In this paper, effective implementations on modern vector and scalar processors are investigated. NEC SX-9 and Intel Nehalem-EX are the latest vector and scalar processors. Those processors have much higher peak performances than their previous-generation processors. However, their memory bandwidth improvement cannot catch up with the performance improvement of processors. This is the so-called memory wall problem. In our paper, we discuss optimization techniques for implementation of the SOR method based on architectural characteristics of these modern processors, and evaluate their effects on the sustained performances of these processors for BCM.     

The Effect of Small Additions of Fe and Heavy Deformation on the Precipitation in an Al–1.1Mg–0.5Cu–0.3Si At. Pct Alloy

Metallurgical and Materials Transactions A - The effect of 0.03 and 0.08 at. pct Fe additions on the formation of secondary phases in an Al–1.1Mg–0.5Cu–0.3Si at. pct alloy was...     

Characteristics of dissimilar laser-brazed joints of isotropic graphite to WC–Co alloy

The effect of Ti serving as an activator in a eutectic Ag–Cu alloy filler metal in dissimilar laser-brazed joints of isotropic graphite and a WC–Co alloy on the joint strength and the interface structure of the joint is investigated in this study. To evaluate the joint characteristics, the Ti content in the filler metal was increased from 0 to 2.8 mass%. The laser brazing was carried out by irradiating a laser beam selectively on the WC–Co alloy plate in Ar atmosphere. The threshold content of Ti required to join isotropic graphite to WC–Co alloy was 0.4 mass%. The shear strength at the brazed joint increased rapidly with increasing Ti content up to 1.7 mass%, and a higher Ti content was found to be likely to saturate the shear strength to a constant value of about 14 MPa. The isotropic graphite blocks also fractured at this content. The concentration of Ti observed at the interface between isotropic graphite and the filler metal indicates the formation of an intermetallic layer of TiC.     

Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process

Multi-walled carbon nanotube (MWCNT)-reinforced copper (Cu) nanocomposite coatings were successfully deposited on aluminum (Al) substrate by a cold spraying process at a low pressure. The microstructure and the Raman spectrum of the low-pressure-cold-sprayed MWCNT–Cu nanocomposite coating showed that the MWCNTs maintained their tube structure in the Cu matrix, even though structural damage to the MWCNTs increased slightly. MWCNT–Cu nanocomposite-coated Al exhibits higher thermal diffusivity than pure-Cu-coated Al with a comparable hardness. The higher thermal diffusivity of the MWCNT–Cu coating could be explained by the dispersion of MWCNTs within the clean and closed CNT/Cu interfaces, which were achieved with the aid of compressive stress during the cold spraying.     

Mie scattering from sphere structures in polymer blends

Polymer blends of transparent poly(methyl methacrylate) and polystyrene become opaque due to light scattering at the boundaries of the two polymers. The polymer blend is light brown when it is illuminated by white light. The coloring depends on the spherical domain structures existing in the polymer blend. The coloring was analyzed by using the rigorous Mie theory. The Mie results were compared with the semiempirical results previously reported by the authors. The wavelength dependence of theoretical scattering efficiencies on radii of scattering spheres from 0.05 to 1.2 μm was obtained for polystyrene spheres in poly(methyl methacrylate) matrix, and vice versa. The scattering at the short wavelength region is stronger than at the long wavelength region. The scattering efficiencies become almost constant in the visible wavelength region for sufficiently large spheres.