Behavior Of Glyoxal During Granular Activated Carbon Treatment

Glyoxal, which was the strong mutagen formed by ozonation of humic substances, was treated with granular activated carbon (GAC) and the behavior of glyoxal was investigated. Glyoxal itself was adsorbed well on GAC at pH 5–7. But, glyoxal increased by GAC treatment of ozonated humic substances when the ozone dose was insufficient to decolorize the humic substances. The precursors of glyoxal may be among other ozonated products which may be changed to glyoxal on GAC.     

Thermal stability of lamellar structure of PST crystal and lamellar boundary design for creep resistant TiAl alloy

The stability of lamellar structure is crucial for the creep resistance of TiAl alloys, but degradation of the lamellar structure is unavoidable at high temperatures. The degradation of the lamellar structure in PST crystals of Ti-48mol.%Al was studied during high temperature exposure (annealing and creep testing) to examine how to make a stable lamellar structure with high creep deformation resistance. Since the six orientation variants of γ lamellae are nucleated independently of the adjoining lamellae, pseudo twin and 120° rotational fault boundaries are most frequently observed at the initial stage of lamellar formation. The preferential removal of high energy (pseudo twin and 120° rotational fault) boundaries during the evolution of lamellar structure results in the highly probable appearance of a true twin boundary at a later stage of lamellar evolution. The coarsening of lamellar spacing and the spheroidization of the lamellae are the major degradation events occurring during creep deformation, and the migration of the lamellar boundaries brings both of them about. The lamellar structures of TiAl alloy contain four types of lamellar boundaries. The stability of the four types of boundaries decreases in the following order: γ/α₂ > true twin > pseudo twin > or=120° rotational fault boundaries. The γ/α₂ boundary has the highest stability (lowest mobility), and the high density of γ/α₂ boundaries is proposed to make a stable lamellar structure with good creep resistance. A material having the high density of γ/α₂ boundaries was produced through the heat treatment of a PST crystal in the α+γ two-phase regime. The excellent creep properties of the material were proven through creep tests of hard oriented PST crystals made of the material. This article is based on a presentation made in the 2002 Korea-US symposium on the “Phase Transformations of Nano-Materials,” organized as a special program of the 2002 Annual Meeting of the Korean Institute of Metals and Materials, held at Yonsei University, Seoul, Korea on October 25–26, 2002.     

Analysis of right ventricular function during bypass of the left side of the heart by afterload alterations in both normal and failing hearts

This study investigated the mechanism of right ventricular failure during bypass of the left side of the heart by precisely assessing right ventricular function with use of a conductance catheter. Bypass of the left side of the heart was established with a centrifugal pump in 10 mongrel dogs weighing 11 to 19 kg. Right ventricular function during left heart bypass was evaluated by two parameters that were both derived from measurement of relative change in right ventricular volume by the conductance catheter technique. One parameter was the right ventricular end-systolic pressure-volume relationship as a load-independent index, and the other was the peak right ventricular pressure-right ventricular stroke volume relationship as a "force-velocity relationship." These parameters were measured in both normal and failing hearts while afterload was increased by bilateral intrapulmonary balloon inflation. Moreover, changes in these relationships were observed by varying assist ratios of left heart bypass from 0% to 100%. Failing heart models were induced by normothermic aortic clamping for 20 minutes. The right ventricular end-systolic pressure-volume relationship in normal hearts did not change, irrespective of the assist ratio of left heart bypass, whereas that in failing hearts decreased from 4.25 +/- 1.41 mm Hg/ml without bypass of the left side of the heart to 3.53 +/- 1.30 mm Hg/ml after 100% assist of left heart bypass (p < 0.05). In the peak right ventricular pressure-right ventricular stroke volume relationship, right ventricular stroke volume was almost constant in normal hearts when afterload was increased regardless of the assist ratio of left heart bypass. Moreover, right ventricular stroke volume was maintained at a higher level during bypass of the left side of the heart compared with that without left heart bypass. However, that slope of the relationship in failing hearts was inversely linear and became significantly steeper after 100% assist of bypass of the left side of the heart compared with that without left heart bypass (-0.131 +/- 0.042 versus -0.051 +/- 0.038, p < 0.005). Therefore ++these two slopes of the relationship intersected at a point that was considered the critical point of afterload during bypass of the left side of the heart. In other words, right ventricular stroke volume was decreased by 100% left heart bypass above the critical point of afterload. In conclusion, this study demonstrates not only that bypass of the left side of the heart results in an increase in right ventricular stroke volume in both normal and failing hearts at the physiologic range of afterload, but also that right ventricular function against higher afterload is impaired by 100% assist of bypass of the left side of the heart in failing hearts.     

Experimental measurement on tangential momentum accommodation coefficient in a single microtube

The tangential momentum accommodation coefficient (TMAC) was investigated experimentally from the mass flow rate through a single microtube under the slip flow and the early part of the transition regime. The measurements were carried out by the constant-volume method under the mean Knudsen number smaller than 0.3, which is based on the mean pressure of the inlet and the outlet of the microtube, to apply the second-order slip boundary condition. To measure TMACs on various materials, quite large microtube was employed, which require the reduction in leakage. TMAC was obtained from the slip coefficient determined by the relation of the mass flow rate to the mean Knudsen number. The obtained mass flow rate was well explained by the theoretical equation. TMACs of deactivated-fused silica with argon, nitrogen, and oxygen were measured, showing the tangential momentum was not accommodated completely to the surface, and the values showed good agreement with previous studies. From the comparison between microtubes with different inner diameter, it is showed that TMAC is determined mainly by gas species and surface material.     

ORBIT: A parallel computing model of Prolog

This paper proposes a parallel processing model of the Prolog language. The model modifies Or-parallelism by introducing the “process bundle” as a candidate for simultaneous execution. The Process bundle is a subset of backtrack points stacked in depth-first execution. The process bundle includes one or more backtrack points, so it provides a longer process life cycle than the Or-parallel process. A process bundle is dispatched when an idle processor requests a job from an executing processor. The executing processor dispatches a message containing the full environment by which the idle processor can execute the process without any communication with other processors.     

破伤风毒素的提纯及形成离子通道的特性

应用硫酸铵分段沉淀和 Ultrogei AcA_(34)凝胶过滤对破伤风毒进行了提纯,并对形成的离子通道在中毒作用中的功能进行了讨论。提纯的毒素与抗粗制毒素血清形成一条沉淀线,于聚丙烯酰胺凝胶电泳中形成单一的蛋白带,分子量为15万,等电点为5.95,毒力为1～3×10~4MLD/μg 蛋白。给小鼠注射低剂量毒素引起迟发性强直性痉挛;注射高剂量毒素引起快速的类肉毒毒素的松弛性麻痹,直至死亡。应用 Patch clamp 技术,破伤风毒素于人工磷脂膜上形成离子通道。只有当膜两侧存有 pH 梯度时毒素才形成离子通道,因此是 pH 依赖的。通道的电导系数为9 PS。     

Highly accurate SNR measurement using the covariance of two SEM images with the identical view

Quality of an SEM image is strongly influenced by the extent of noise. As a well-known method in the field of SEM, the covariance is applied to measure the signal-to-noise ratio (SNR). This method has potential ability for highly accurate measurement of the SNR, which is hardly known until now. If the precautions discussed in this article are adopted, that method can demonstrate its real ability. These precautions are strongly related to "proper acquisition of two images with the identical view," "alignment of an aperture diaphragm," "reduction of charging phenomena," "elimination of particular noises," and "accurate focusing," As necessary, characteristics in SEM signal and noise are investigated from a few standpoints. When using the maximum performance of this measurement, SNR of many SEM images obtained in a variety of the SEM operating conditions and specimens can be measured accurately.     

Giant neurofibroma of the occipital scalp associated with lambda defect-case report (author's transl)

Calvarial bone defect associated with a hugh neurofibroma in the region of the lambdoid suture was reported in a 42-year-old man with v. Recklinghausen's neurofibromatosis. An enlarging occipital tumor was first noted at age 4 similar to or approximately 5, and an operation was performed at age 12. Lambda defect was noted at that time, but the operative diagnosis was, apparently, "meningocele". Available literature was reviewed, and the significance of calvarial bone defect in the region of the lambdoid suture as a manifestation of v. Recklinghausen's disease was stressed. Lambda defect witn no sclerosing margin, particularly if associated with hypoplasia of the ipsilateral mastoid cells, has been known to represent the primary nature of the bone defect due to mesodermal dysplasia. In the present case, plain radiographs of the skull revealed abnormal sclerotic change around the bone defect. It is suggested that such an osteoblastic change may well indicate the secondary nature of the bone defect due to the presence of overlying neurogenic tumor.     

Hot-water treatment of sol–gel derived SiO2–TiO2 microparticles and application to electrophoretic deposition for thick films

SiO₂–TiO₂ spherical microparticles of about 0.7 μm in diameter were prepared by the sol–gel method. Anatase nanocrystals were formed in the microparticles and their specific surface area was increased after a hot-water treatment at 90 °C. From the changes in the concentration of I₂ photocatalytically generated from KI aqueous solution, the activity of the SiO₂–TiO₂ microparticles was found to increase with increasing the hot-water treatment time. Particulate, thick films were electrophoretically deposited on indium tin oxide (ITO)-coated glass substrates using the anatase nanocrystal-precipitated SiO₂–TiO₂ microparticles. The thickness of the electrophoretically deposited particulate film increased to be approximately 10 μm with an increase in applied voltage. The resultant thick film showed a high photocatalytic activity.