A comparative study of SiAlON ceramics

Two different varieties of Si₃N₄ powders were used to prepare SiAlON ceramics. 100% β-Si₃N₄ was used from refractory grade powders (B1) and another purer 98% α-Si₃N₄ (50A) powder was used to prepare the SiAlON samples. Since SiC + SiAlON composites reportedly perform better, batches were prepared with 15% SiC addition to the refractory powders (B1) and 17.5% SiC was added to the other SiAlON composition (50A). The samples were gas pressure sintered at 1840 °C and at 22 bar with 1 h dwelling time. Thereby, we could achieve 97–98% theoretical density. The hardness was recorded 14–17 GPa while fracture toughness varied from 4.3 to 5 MPa m^1/2. Fretting experiments showed initial running-in period of 300 cycles for all the tribo-couples. After which, the steady state coefficient of frictions (COF) were achieved. Steel ball of 10 mm diameter, fretting against 50A composition, showed 0.6 average steady state COF while the same composition while fretting against alumina ball of the same diameter, showed 0.57 average steady state COF. Results have been compared with SiAlON composition derived from refractory powder (B1) and found that the 50A composition performs better under identical test conditions. Moreover, cytocompatibility study also suggests that the investigated 50A composition can be used as substrate to support cell adhesion and proliferation of L929 mouse fibroblast cell lines whereas B1 composition derived from refractory powders are toxic in nature.     

A participatory process for the design of housing for a First Nations Community

First Nation (Indigenous) on-reserve housing in Canada is in crisis due to severe shortages, high reported instances of mould contamination, overcrowding and structural deficiencies. The Kitamaat reserve of the Haisla First Nation provides one example. The intent of the study reported here was to engage with the Haisla to develop a culturally appropriate, environmentally responsive and energy-efficient housing type that the Haisla could implement in the future. This work was undertaken by Marceau-Evans-Johnson Architects in collaboration with researchers at the University of Victoria. In this article, the circumstances leading to the present housing crisis are reviewed, the consultative design process with the Haisla and its outcomes are described, and the concept design solution which was co-developed for future housing is presented.     

Implementation of Hydraulic Modelling for Water-Loss Reduction Through Pressure Management

This study was conducted in the Konyaalti Water Distribution Network in Antalya, Turkey. The study area was divided into 18 district metered areas (DMAs) for better management of water losses. Water levels in reservoirs, flow rates, and water pressures were monitored on-line by the SCADA data system. A hydraulic model was calibrated and verified for each DMA using data provided by SCADA. The model results revealed that a number of DMAs exhibited high pressures, greater than 3.5 bars, and high minimum night flow (MNF) throughout the year. Also, the Infrastructure Leakage Index (ILI) for the study area was greater than 20, indicating high water losses. As a result of these findings, a pressure reducing valve (PRV) was installed at DMA No. 2 as an example and set at 3.0 bars resulting in considerable reduction in water losses. The optimum pressure level for setting the PRV was chosen using the hydraulic model. The same model was used to predict water savings due to pressure reduction. The predicted water savings were verified using long periods of flow rates and water pressure profiles. The predicted and measured water savings showed good agreement. The study concluded that hydraulic modelling is essential for applying appropriate pressure management strategies.     

Tribological Behavior of TiAlN,AlTiN, and AlCrN Coatings at Boundary Lubricating Condition

In this study, ~?3.5 µm thick multilayer titanium alumina nitride (TiAlN), alumina titanium nitride (AlTiN), and alumina chromium nitride (AlCrN) coatings were deposited on the H13 steel surface by cathodic arc physical vapor deposition (CAPVD) method. The tribological performance of the coatings was evaluated by a tribometer at boundary lubrication condition. Then, coating surfaces were observed by optical microscope, optical profilometer, and atomic force microscope to evaluate the morphological changes, wear volumes, and tribofilm thickness. Also, scanning electron microscopy (energy dispersive X-ray) and X-ray photoelectron spectrometry analyses were applied to coating surfaces for the tribochemical evolution of the tribofilm. Results showed that AlCrN coating performed the best tribological behavior at boundary lubricated condition, when compared to TiAlN and AlTiN coatings and it can be used as a wear resistant cam tappet coating in internal combustion engines.     

Modeling Alcohol Dehydrogenase Catalysis in Deep Eutectic Solvent/Water Mixtures

The use of oxidoreductases (EC1) in non-conventional reaction media has been increasingly explored. In particular, deep eutectic solvents (DESs) have emerged as a novel class of solvents. Herein, an in-depth study of bioreduction with an alcohol dehydrogenase (ADH) in the DES glyceline is presented. The activity and stability of ADH in mixtures of glyceline/water with varying water contents were measured. Furthermore, the thermodynamic water activity and viscosity of mixtures of glyceline/water have been determined. For a better understanding of the observations, molecular dynamics simulations were performed to quantify the molecular flexibility, hydration layer, and intraprotein hydrogen bonds of ADH. The behavior of the enzyme in DESs follows the classic dependence of water activity (a_W) in non-conventional media. At low a_W values (<0.2), ADH does not show any activity; at higher a_W values, the activity was still lower than that in pure water due to the high viscosities of the DES. These findings could be further explained by increased enzyme flexibility with increasing water content.     

Use of Eddy Current Conductivity and Hardness Testing to Evaluate Heat Damage in Aluminum Alloys

Aluminum alloys are heat treated to provide optimal material properties for use in a variety of applications. However, when exposed to abnormally high temperatures, an evaluation must be performed to determine if the aluminum component has been compromised. Nondestructive evaluation of aluminum alloys, by means of electrical conductivity and hardness tests, can assist in determining the condition of the part. These techniques require experience and engineering judgment to properly interpret the data produced in order to determine whether a part needs to be replaced. This article will elaborate on issues with these nondestructive techniques to help diagnose the condition of aluminum alloys exposed to high temperatures.     

The Gut Microbiota: A Potential Gateway to Improved Health Outcomes in Breast Cancer Treatment and Survivorship

Breast cancer is the most frequently diagnosed cancer in women worldwide. The disease and its treatments exert profound effects on an individual’s physical and mental health. There are many factors that impact an individual’s risk of developing breast cancer, their response to treatments, and their risk of recurrence. The community of microorganisms inhabiting the gastrointestinal tract, the gut microbiota, affects human health through metabolic, neural, and endocrine signaling, and immune activity. It is through these mechanisms that the gut microbiota appears to influence breast cancer risk, response to treatment, and recurrence. A disrupted gut microbiota or state of ‘dysbiosis’ can contribute to a biological environment associated with higher risk for cancer development as well as contribute to negative treatment side-effects. Many cancer treatments have been shown to shift the gut microbiota toward dysbiosis; however, the microbiota can also be positively manipulated through diet, prebiotic and probiotic supplementation, and exercise. The objective of this review is to provide an overview of the current understanding of the relationship between the gut microbiota and breast cancer and to highlight potential strategies for modulation of the gut microbiota that could lead to improved clinical outcomes and overall health in this population.     

Design and Characterization of a New pVII Combinatorial Phage Display Peptide Library for Protease Substrate Mining Using Factor VII Activating Protease (FSAP) as Model

We describe a novel, easy and efficient combinatorial phage display peptide substrate-mining method to map the substrate specificity of proteases. The peptide library is displayed on the pVII capsid of the M13 bacteriophage, which renders pIII necessary for infectivity and efficient retrieval, in an unmodified state. As capture module, the 3XFLAG was chosen due to its very high binding efficiency to anti-FLAG mAbs and its independency of any post-translational modification. This library was tested with Factor-VII activating protease (WT-FSAP) and its single-nucleotide polymorphism variant Marburg-I (MI)-FSAP. The WT-FSAP results confirmed the previously reported Arg/Lys centered FSAP cleavage site consensus as dominant, as well as reinforcing MI-FSAP as a loss-of-function mutant. Surprisingly, rare substrate clones devoid of basic amino acids were also identified. Indeed one of these peptides was cleaved as free peptide, thus suggesting a broader range of WT-FSAP substrates than previously anticipated.