氧化锆增韧陶瓷的相变及相变增韧

本文阐述了氧化锆增韧陶瓷（ＺＴＣ）的相变增韧机理，并探讨了热处理工艺对ＺＴＣ的相变及显微组织的影响规律。     

石油树脂加氢工艺的研究——Ⅰ。芳烃石油树脂加氢

报道了加氢过程中反应压力、反应温度、反应空速及原料浓度对加氢效果的影响。通过采用自制的S105溶剂和选定的催化剂使原料树脂浓度达到50％(w),并得到软化点大于90℃,色相(赛波特)30~#及溴价小于2gBr_2/100g的水白色加氢石油树脂。     

电脉冲快速退火对铁基非晶合金性能的影响

采用大电流交流脉冲对非晶Ｆｅ７８Ｂ１３Ｓｉ９合金进行了去应力退火。初步探讨了电脉冲加热对加热速率和该合金内应力释放、退火脆化以及最终软磁性影响的基本规律。结果表明：电脉冲加热可以得到远高于常规退火的加热速率，选择合适工艺参数可使非晶合金内应力释放９０％，软磁性（Ｈ＿ｃ和Ｂ＿ｓ）达常规退火后的９５％以上，与此同时使合金的延性（断裂应变ε＿ｆ）维持在０．９以上，从而有望实现非晶合金磁性与延性的合理配合。     

高梯度加速管的束流传输

对不同能量、不同质量数、不同初始条件的入射束和有无空间电荷效应的离子束流在高梯度加速管中的传输进行了计算，并讨论了一些影响加速管聚焦作用的主要因素，计算结果与实际情况相符。     

THE ANALYSIS OF THE SEPARATED LAYERS ALGORITHM BY DOMAIN DECOMPOSITION METHOD

From the principle of of the Domain Decomposition Method (DDM), we analyse the 2nd-order linear elliptic partial differential problems and link the Separated-Layers Algorithm (SLA) with DDM. The mathematical properties of SLA and numerical example are presented to obtain satisfactory computation results. For general linear differential ones, also are the structure of SLA and its characteristics discussed.     

Effects of oxide additives on sheet resistance of W thick-film conductor

A multilayer AIN-W cofired body has been developed using the pressless sintering technique. Effects of additives, such as Y₂O₃, CaO, La₂O₃, MgO, Al₂O₃ and SiO₂, on the sheet resistance of W conductor were studied. The sheet resistance of the W conductor increases with increasing additives in the W paste. However, the oxides can be divided into two groups. The effect of the first group on sheet resistance is different from that of the second group.     

连铸板坯的鼓肚变形与应力分析

以粘弹性薄板为模型，应用材料流变学理论及弹性薄板理论，分析计算了连铸板坯在钢水静压力与不均匀温度场作用下所发生的鼓肚变形与应力。计算结果与宝钢板坯连铸机的设计公式所得结果相吻合。此外，还得出了铸坯对夹辊的作用力。     

Microstructure and fracture toughness of nickel particle toughened alumina matrix composites

Al₂O₃-Ni composite materials have been made by a hot pressing technique. Two composite microstructures, i.e. a dispersive distribution of nickel particles and a network distribution of nickel particles in an alumina matrix, have been produced. The fracture toughness of the composite materials has been measured by a double cantilever beam method. Both composites are tougher than the virgin alumina matrix. The fracture toughness of the composite with a network microstructure is much higher and has a more desirable R-curve behaviour than the composite with a microstructure of dispersed particles. For the particulate dispersion microstructure, the main limitation to toughening is the lack of plastic deformation of the ductile nickel due to the pull out of nickel particles, indicating weak bonding at the Al₂O₃/Ni interface. For the network microstructure composite, the gauge length of the ductile phase is much larger, allowing the ductile nickel to stretch to failure between the crack faces. A large extent of nickel plastic deformation has been observed, and the weak bonding at the Al₂O₃/Ni interface can promote partial debonding and contribute further to toughening.