Banana peel: an effective biosorbent for aflatoxins

This work reports the application of banana peel as a novel bioadsorbent for in vitro removal of five mycotoxins (aflatoxins (AFB1, AFB2, AFG1, AFG2) and ochratoxin A). The effect of operational parameters including initial pH, adsorbent dose, contact time and temperature were studied in batch adsorption experiments. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and point of zero charge (pH_pzc) analysis were used to characterise the adsorbent material. Aflatoxins’ adsorption equilibrium was achieved in 15 min, with highest adsorption at alkaline pH (6–8), while ochratoxin has not shown any significant adsorption due to surface charge repulsion. The experimental equilibrium data were tested by Langmuir, Freundlich and Hill isotherms. The Langmuir isotherm was found to be the best fitted model for aflatoxins, and the maximum monolayer coverage (Q₀) was determined to be 8.4, 9.5, 0.4 and 1.1 ng mg^?1 for AFB1, AFB2, AFG1 and AFG2 respectively. Thermodynamic parameters including changes in free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) were determined for the four aflatoxins. Free energy change and enthalpy change demonstrated that the adsorption process was exothermic and spontaneous. Adsorption and desorption study at different pH further demonstrated that the sorption of toxins was strong enough to sustain pH changes that would be experienced in the gastrointestinal tract. This study suggests that biosorption of aflatoxins by dried banana peel may be an effective low-cost decontamination method for incorporation in animal feed diets.     

Investigation of Dissipation,Adsorption, Degradation,and Leaching of Triazophos Pesticide in Various Soils

This study concerns the investigation of dissipation, adsorption, and degradation of triazophos in different soils from Pakistan. These processes help in the disappearance of pesticide from the environment. Gas chromatography was used for dissipation and adsorption analysis while for degradation study mass spectrometer was used in addition of gas chromatography (GC-MS). The dissipation rate of triazophos in three different soils was 90% over 30 days with average half-life of 9.059 days. From dissipation study it was inferred that rate is variable in each soil due to climatic changes, soil nature and soil-pesticide interactions. Adsorption experiment has revealed that the adsorption of this pesticide to soil follows the pseudo first order kinetic model with rate constant value of 0.479/h and Freundlich isotherm with adsorption capacity of 1.832 mol/g. Degradation study has displayed two major metabolites, one is phosphorothioic acid, S-[2-[(1-cyano-1-methylethyl) amino]-2-oxoethyl] O,O-diethyl ester at retention time of 9.136 and the other is sulfotep at 14.304 min. The leaching potential of triazophos was also calculated from its half-life and organic carbon content present in soil which was 1.688 representing it as non leacher pesticide.     

Estimation of Desired Motion Intention and compliance control for upper limb assist exoskeleton

International Journal of Control, Automation and Systems - In this paper, we have addressed two issues for upper limb assist exoskeleton. 1) Estimation of Desired Motion Intention (DMI); 2) Robust...     

Oil palm bunch ripeness classification using fluorescence technique

Oil palm is Malaysia’s major agriculture product and it covers approximately 5 million hectares of Malaysia’s land. Limited land resources have been an important factor that motivated the need to increase oil extraction rate (OER). OER of oil palm fresh fruit bunches (FFB) depends highly on their maturity stage. The ripe oil palm FFB will produce high OER while the under ripe and over ripe oil palm FFB will produce less oil. Thus, this paper presents a method of classification between oil palm FFB into ripe, under-ripe and over-ripe categories. This research was done at an oil palm plantation in peninsular Malaysia. A total of two-hundred and ten oil palm FFB that consist of seventy bunches for each category of under-ripe, ripe and over-ripe had been used. Each bunch was scanned ten times randomly with a hand-held multi-parameter fluorescence sensor called Multiplex®3. The parameter measured was the Blue-to-Red Fluorescence Ratio (BRR_FRF) obtained from blue-green (447 nm) and far-red (685 nm) emission signal by using ultraviolet (UV) light emitting diode as excitation light source. The novel contribution of this research is to prove that the oil palm FFB maturity can be determined using the Blue-to-Red Fluorescence ratio index. This is based to our finding of a significant difference among the three categories of ripeness based on the parameter. Classification and Regression Tree (C&RT) method was proposed in this paper. Hundred-fifty samples were used to develop the model by trained it using C&RT method and the remaining sixty samples for the test component. By using the C&RT method, the results show the best accuracy of overall testing classification is 90%. This research will be useful for future development of non-destructive, automatic and real time oil palm FFB grading system.     

Asymptotic stability, ℓ2 gain,boundness analysis,and control synthesis for switched systems: a switching frequency approach

In this paper, several concepts of switching frequency are introduced to analyze the properties and performance of switched systems in infinite as well as finite‐time intervals. The observation is very motivating that different system properties and performances depend on different switching frequencies. Sufficient conditions ensuring asymptotic stability, ?₂ gain performance, and state boundness are derived on the basis of the notions of switching frequency, respectively. Then, on the basis of the analysis results, the control synthesis problems are addressed. LMI‐based design algorithms are proposed to meet different control synthesis requirements. Numerical design examples are provided to demonstrate our results. Copyright © 2011 John Wiley & Sons, Ltd.     

Analysis of optimized signal processing algorithms for smart antenna system

By the exponential increase in cellular communication area, the user demands and with their side problems also tend to increase. Several techniques such as cell splitting, frequency reuse, diversity and so on have already been applied to overcome these problems. In all these procedures, smart antenna is one of the best techniques used to boost capacities, enlarge bandwidth, raise the SIR ratios, minimize the effects of fading and improve MIMO communications. An ordinary antenna array which can turn up into a smart antenna array is due to the signal processing algorithms, which consists of angle of arrival (AOA) estimations and Beamforming. In this paper, I will discuss and analyse about the MUSIC algorithm for AOA estimation and least mean squares algorithm for Beamforming.     

Photocatalytic conversion of CO2 into methanol using graphitic carbon nitride under solar,UV laser and broadband radiations

Photocatalytic conversion of carbon dioxide into methanol using highly efficient g‐C₃N₄, in conjunction with three different radiations (solar radiation, broad‐band ultraviolet (UV)–visible lamp, and laser beam) is presented. The optical, structural, and morphological properties of the synthesized g‐C₃N₄ were studied using advanced analytical techniques like Fourier transform infrared spectroscopy, UV–visible spectrometer, X‐ray diffraction, high‐resolution transmission electron microscopy, high‐angle annular dark field, and X‐ray photoelectron spectroscopy. The relative merits of the three sources of radiation in the presence of g‐C₃N₄ were studied in terms of key figures of merit of the photocatalytic process, namely, methanol production yield and quantum yield. As expected, after 40 min of irradiation, 355‐nm laser (40 mJ/pulse, 10 Hz) with g‐C₃N₄ rendered the best methanol production yield (510 μmol g ^{? 1} h ^{? 1}), followed by solar radiation (130 μmol g ^{? 1} h ^{? 1}), and UV broadband lamp. This indicates that the photon flux and the spectral properties of incident light are the key factors for the enhancement of methanol production yield. Although the methanol production yield with 355‐nm laser radiation is quite impressive because of the inherent high photon flux and the monochromatic nature of laser, the methanol yield of 130 μmol g ^{? 1} h ^{? 1} with natural sunlight is quite an important result, as it can be used for the development of large‐scale solar fuel generation facilities by harnessing the naturally abundant solar radiation. Copyright © 2017 John Wiley & Sons, Ltd.     

Solid lipid nanoparticles of anticancer drug andrographolide: formulation,in vitro and in vivo studies

Diterpenoidal anti-cancer drug andrographolide (AD) was encapsulated into solid lipid nanoparticle (SLN) because of poor aqueous solubility and high lipophilicity. AD-SLNs were prepared by solvent injection method and characterized for droplet size, surface morphology, zeta potential, etc. In vitro drug release was carried out by dialysis-membrane method. A pharmacokinetic study was performed by UPLC/Q-TOF-MS method to determine the maximum plasma concentration (C_max), area under the curve (AUC), etc. There was an improvement in C_max and AUC of AD-SLNs when compared with AD, thereby enhancing the bioavailability of AD. The t_max was increased than that of AD suspension, indicating the sustained release pattern of AD-SLNs. The antitumor activity was carried out on Balb/c mice showing better results with AD-SLNs as compared to AD. Thus, the AD-loaded SLNs would be useful for delivering poorly water-soluble AD with enhanced bioavailability and improved antitumor activity.