Mathematical model for the pultrusion of blocked PU–UP matrix composites

The thermokinetic behavior of blocked polyurethane (PU)–unsaturated polyester (UP)–based composites during the pultrusion of glass‐fiber‐reinforced composites was investigated utilizing a mathematical model that accounted for the heat transfer and heat generation during curing. The equations of continuity and energy balance, coupled with a kinetic expression for the curing system, were solved using a finite difference method to calculate the temperature profiles and conversion profiles in the thickness direction in a rectangular pultrusion die. A kinetic model, dP/dt = A exp(?E/RT)P^m(1 ? P)ⁿ, was proposed to describe the curing behavior of a blocked PU–UP resin. Kinetic parameters for the model were obtained from dynamic differential scanning calorimetry scans using a multiple regression technique, which was able to predict the effects of processing parameters on the pultrusion. The effects of processing parameters including pulling speed, die wall temperature, and die thickness on the performance of the pultrusion also were evaluated. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1996–2002, 2003     

Morphology and characterization of conductive films based on polyaniline‐coated polystyrene latexes

The polyaniline (PANI)‐coated polystyrene (PS) latexes were synthesized, and the electrically conductive films were prepared thereafter. The weight ratio of PANI was 5%. Thermal analysis of the latices was performed using DSC and TGA. In this study, the electrically conductive films were prepared above the PS glass transition temperature (T_g). During the film formation, the effects of the annealing temperature and atmosphere (air or N₂) on the film resistance were investigated. In addition, the film morphology was observed utilizing scanning electron microscopy. The film resistance decreased in the initial heating stage due to the increasing temperature and the compaction of film. Then the film resistance increased with further annealing due to the aging of PANI. Typically, the film resistance was about 6000 Ω/sq, and the conductivity was 0.3 S/cm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5406–5413, 2006     

Solvent fractionation of petroleum pitch for mesophase formation

Petroleum pitch (Ashland A240) has been subjected to thermal treatment and solvent fractionation to produce refined pitches to be evaluated as impregnants for C-C composites. The solvent fractions were obtained by sequential Soxhlet extraction with solvents such as hexane, benzene, and pyridine. Thermal treatment to 408 °C produced a mesophase pitch (≈50% mesophase); an appreciable portion of the mesophase was soluble in strong solvents. There were substantial differences in chemical composition and in pyrolysis behaviour of the fractions. As the depth of fraction increased, the pyrolysis yield and bloating increased, and the microstructure of the coke became finer until glassy microconstituents were formed in the deepest fractions.     

Synthesis and self-assembly of comb oligomers having rigid racemic or chiral binaphthyl macrocyclic pendant groups

In this article, we described the synthesis of comb oligomers having rigid racemic or chiral binaphthyl macrocyclic pendant groups via the free radical polymerization. Oligomers obtained were well characterized by MALDI-TOF-MS, ¹H NMR, FT-IR, UV, CD and SEC. These comb oligomers having macrocyclic pendant groups showed very good solubility in common organic solvents at room temperature. Furthermore, the oligomers could self-assemble into different morphologies by dropping their THF solutions of different concentrations on the surface of water. At a relatively low concentration, the oligomers self-aggregated into hollow spheres. When the concentration was increased, the aggregates changed into solid spheres. The morphologies of the hollow or solid spheres were observed by TEM and ESEM.     

Adsorption properties of a chelating resin containing hydroxy group and iminodiacetic acid for copper ions

A chelating resin, PSGI, was synthesized by the radical polymerization of GMA‐IDA, DVB, and styrene for the removal of Cu(II), Co(II), and Cd(II) from an aqueous solution. The characteristic functional groups and chemical composition of PSGI were analyzed by Fourier transform infrared spectroscopy and elemental analysis of C, H, and N. The equilibrium adsorption capacities of PSGI from their single‐metal ion solutions were 1.46 mmol/g for Cu(II), 1.02 mmol/g for Co(II), and 1.10 mmol/g for Cd(II). The adsorption isothermal of Cu(II) by PSGI followed the Langmuir isotherm. Increasing the concentration (0–0.1 M) of KCl in Cu(II) solution affected the adsorption behavior slightly. Within the pH range of 2–5.5, decreasing the pH of the Cu(II) solution did not produce remarkable changes in the equilibrium adsorption capacities. The adsorption capacities of PSGI for Cu(II) did not cause significant change during the repeated adsorption–desorption operations. The competitive adsorption tests verified that this resin had good adsorption selectivity for Cu(II) with the coexistence of Co(II) and Cd(II). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2123–2130, 2004     

Properties of modified polyacrylonitrile membranes prepared by copolymerization with hydrophilic monomers for water–ethanol mixture separation

A new kind of terpolymer membrane was employed to separate a permselective water–alcohol mixture. This membrane was prepared via the copolymerization of acrylonitrile, sodium salt styrene sulfonic acid (SStSA), and hydroxyethyl methacrylate in dimethylsulfoxide with azobisisobutyronitrile as an initiator. The reaction mechanism, resultant structure, and polymer composition were confirmed by IR and elemental analysis. The effects of the feed composition on the polymer composition, mechanical properties, thermal properties, and degree of swelling were investigated. It was found that water permeated through the membrane preferentially in a water/alcohol system. The flux increased with the increase of SStSA, but the separation factor decreased drastically with higher SStSA. For a 50 wt % water–ethanol mixture, a flux of 0.65 kg/m² h and a separation factor of 212 were obtained at 30°C when the membrane containing the highest SStSA content was used. The capacities of the metal ions absorbed by the membranes were investigated in the study. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 244–250, 2003     

Water‐assisted injection molding of thermoplastic materials: Effects of processing parameters

The objective of this study was to experimentally investigate the effects of various processing parameters on the water‐assisted injection molding of thermoplastic materials. Experiments were carried out on a lab‐developed water‐assisted injection molding system, which included a water pump, a water injection pin, a water tank equipped with a temperature regulator, and a control circuit. Two types of water injection pins designs were proposed to mold the parts. After molding, the lengths of water penetration in molded parts were measured. The effects of different processing parameters on the lengths of water penetration were determined. It was found that the shrinkage rate and the viscosity of the polymeric materials, and the void shapes of the hollowed cores mainly determined the water‐penetration lengths in molded products. In addition, a comparison has been made between the parts molded by water assisted injection molding and gas‐assisted injection molding. It was found that water‐assisted injection molded parts exhibit less uniform void sizes along the water channel. The cycle time for water‐assisted injection molded parts was shorter than that of conventional injection molded parts and gas‐assisted injection molded parts.     

Biodegradation of catechol by Pseudomonas fluorescens isolated from petroleum‐impacted soil

Bioremediation strategies have been applied to clean up petroleum hydrocarbon (PHC) impacted sites. Introducing PHC degrading microorganisms (bioaugmentation) and enhancing the in‐situ nutrients availability (biostimulation) are widely used strategies. These strategies can be combined to lead to a better bioremediation performance. In this work, Pseudomonas fluorescens was isolated from a PHC impacted site. Through a 2³ factorial design plan, the effect of various combinations of nitrate, sulphate, and phosphate ions on the PHC bioremediation performance by P. fluorescens was investigated using catechol, an essential metabolic intermediate of BTEX degradation, as the sole carbon source. The maximum specific catechol degradation rate was chosen as the response to evaluate the catechol bioremediation performance. The ANOVA results indicated that the presence of nitrate ions alone lowered the maximum specific catechol degradation rate, which can be explained by the accumulation of nitrites and ammonia during the denitrification process by P. fluorescens. It was noted that dosing sulphate ions alone did not affect the bioremediation performance, which indicates P. fluorescens can grow in a sulphur‐limited environment. In contrast, the presence of sulphate and nitrate ions together can lead to a higher specific catechol degradation rate. This may be caused by the presence of sulphate that can suppress the production of nitrites. The importance of phosphate ions on catechol biodegradation was investigated. The absence of phosphate led to incomplete biodegradation. Introducing phosphate ions can accelerate catechol degradation, which can be explained by the secretion of organic acids.     

A gas chromatography–mass spectrometry method for the detection of chlorpyrifos contamination in palm-based fatty acids

Chlorpyrifos is a Malaysian Pesticide Board-approved organophosphate insecticide, which may become concentrated during fractionation. The objective of this project was to develop and validate a method to detect and quantify chlorpyrifos in food-grade fatty acids ingredients, e.g. caprylic-capric acid mixture and oleic acid (OLA) used to synthesize triacylglyceride based food additives and in the cosmetic industry. A selective ion monitoring gas chromatography–mass spectrometry method with a matrix-matched calibration curve calibration was selected. The method involved the direct injection of chlorpyrifos spiked into the fatty acids matrix. The percentage recoveries at spiking levels of 0.5, 0.75, 2.5, and 4.0 μg g⁻¹ of chlorpyrifos in OLA and caprylic-capric acid ranged from 85.7%–101.1% to 97.2%–112%, respectively, with a relative standard deviation of within 11%. The intra-day and inter-day precision were deemed acceptable as indicated by an relative SD value of within 10%. A good linear relationship with a coefficient of correlation >0.99 for the matrix-matched calibration was achieved between 0.5 and 5 μg g⁻¹. The limit of detection and limit of quantification corresponded to 0.5 μg g⁻¹ for OLA and 0.55 μg g⁻¹ for caprylic-capric acid.     

微计算机图象法测示和控制焊接过程的探索

计算机图象法是计算机应用的新发展。本文对微计算机图象法在焊接领域中的应用作了一些探索。研究和配置了不同分辨力的图象输入接口(8BIT、4BIT、二化值),并进行了焊接图象处理、模式识别和反馈自动控制方面的研究。简介了采用微计算机图象法在焊接过程中面积和尺寸形状的测量、焊接温度场测定、焊缝X 光底片判断、焊缝对中等方面的研究工作,从而证明计算机图象法在焊接领域中具有广阔的前途.