Enhanced renal toxicity by inorganic mercury in metallothionein-null mice

To elucidate a protective role of metallothionein (MT) in the manifestation of inorganic mercury toxicity, we studied the susceptibility of MT-null mice to the renal toxicity of mercuric chloride. Because the MT-null (J) mice are a genetic background of 129/Sv strain, the 129/Sv mice were used as wild-type controls. Nine-week-old male MT-null (J) and 129/Sv mice were given subcutaneous injections of mercuric chloride at doses of 10 to 40 micromol/kg. The basal MT level in the kidney of MT-null (J) mice was undetectable (<0.2 microg/g of tissue) and approximately 2.5 microg/g of tissue in 129/Sv mice. The sensitivity to the renal toxicity of mercuric chloride was markedly enhanced in the MT-null (J) mice compared with the 129/Sv mice. The renal mercury level was similar for the MT-null (J) and 129/Sv mice at 4 hr after the injection of mercuric chloride (20 micromol/kg) but became significantly lower in MT-null (J) mice than in 129/Sv mice at 24 and 72 hr. Based on the present results, we conclude that MT is an important protective factor against the renal toxicity caused by inorganic mercury and that it may play a major role in the retention of mercury in the kidney.     

Effect of weld line direction and paint orientation on corrosion and paint deterioration characteristics of welded part of steel

One thousand two hundred cycles of accelerated exposure experiment with combined salt water spray simulating atmospheric corrosion was performed for investigating the effect of weld line direction and paint orientation on the corrosion and paint deterioration characteristics of welded part of the steel. The corrosion depth of the weld toe of transverse weld line became 1.35 times as large as that of the base metal part because of the remained salt water on the weld toe. The coating thickness at the weld toe became thin by vertically painting on the transverse weld line. When the scribe line was installed at the thin painted weld toe under the transverse weld line, the paint blister area became 15% larger than that of the base metal part. The paint coating thickness at the weld toe in different weld line directions and paint orientations should be confirmed and ensured from the viewpoints of manufacturing and maintaining steel structures.     

Synthesis and photoinduced surface relief grating formation of novel photo-responsive amorphous molecular materials, 4-[bis(9,9-dimethylfluoren-2-yl)amino]-4′-cyanoazobenzene and 4-[bis(9,9-dimethylfluoren-2-yl)-amino]-4′-nitroazobenzene

Novel azobenzene-based photo-responsive amorphous molecular materials, 4-[bis(9,9-dimethylfluoren-2-yl)amino]-4′-cyanoazobenzene and 4-[bis(9,9-dimethylfluoren-2-yl)amino]-4′-nitroazobenzene, have been synthesized and the formation of surface relief grating on their amorphous films has been investigated. It was found that a relatively large surface relief grating could be inscribed on both amorphous films upon interference exposure to the writing laser beams. The modulation depth of the surface relief grating inscribed on the amorphous film of the cyano-substituted material was found to be larger than that inscribed on the film of the nitro-substituted one and seemed to be comparable to that inscribed on the amorphous film of the parent material, 4-[bis(9,9-dimethylfluoren-2-yl)amino]azobenzene. These results were discussed from the viewpoint of their trans–cis photoisomerizations as amorphous films and glass-transition temperatures.     

Effect of cellular inositol content on ethanol tolerance of Saccharomyces cerevisiae in sake brewing

The effect of cellular inositol content on the ethanol tolerance of sake yeast was investigated. In a static culture of strain K901 in a synthetic medium, when cells were grown in the presence of inositol in limited amount (L-cells), the inositol content of cells decreased by one-third that of cells grown in the presence of inositol in sufficient amount (H-cells). L-cells exhibited a higher death rate constant than H-cells in the presence of 12-20% ethanol, while no difference in specific ethanol production rate in the presence of 0-18% ethanol between the two cell types was observed. L-cells leaked more intracellular components, such as nucleotides, phosphate and potassium, in the presence of ethanol than H-cells. L-cells exhibited a lower intracellular pH value than H-cells, which represented the lowering of cell vitality by the decrease in H(+) extrusion activity. Furthermore, the plasma membrane H(+)-ATPase activity of L-cells was approximately one-half of that of H-cells. Therefore, it was considered that the decrease in viability in the presence of ethanol due to inositol limitation results from the lowering of H(+)-ATPase activity, which maintains the permeability barrier of the yeast membrane, ensuring the homeostasis of ions in the cytoplasm of yeast cells. It is assumed that the lowering of H(+)-ATPase activity due to inositol limitation is caused by the change in lipid environment of the enzyme, which is affected by inositol-containing glycerophospholipids such as phosphatidylinositol (PI), because in the PI-saturated mixed micellar assay system, the difference in H(+)-ATPase activity between L- and H-cells disappeared. In the early stage of sake mash, inositol limitation lowers the ethanol tolerance due to the decrease in H(+)-ATPase activity as in static culture. In the final stage of sake mash, the disruption of the ino1 gene responsible for inositol synthesis, resulted in a decrease in cell density. Furthermore, the ino1 disruptant, which was not capable of increasing the cellular inositol level in the final stage, exhibited a significantly higher methylene blue-staining ratio than the parental strain. It was suggested that the yeast cellular inositol level is one of the important factors which contribute to the high ethanol tolerance implied by the increased cell viability in the presence of ethanol.     

Solidification of Al2O3–YAG eutectic composites with off-metastable eutectic composition from undercooled melt produced by melting Al2O3–YAP eutectics

It has been reported that solidification of the Al₂O₃–YAG equilibrium eutectic structure follows melting of the Al₂O₃–YAP metastable eutectic structure. Since the exothermic heat due to solidification was consumed by the endothermic heat due to melting, a fine and uniform eutectic structure was obtained. However, the composition of the Al₂O₃–YAG eutectic structure is restricted to the metastable eutectic composition. In this paper, Al₂O₃–YAG eutectic compacts with an off-metastable eutectic composition were prepared by the addition of Al₂O₃ particles to Al₂O₃–YAP eutectic particles with diameters less than 20 μm. In compositions ranging from 18.5 mol%Y₂O₃ to 13.5 mol%Y₂O₃, dense Al₂O₃–YAG eutectic compacts were formed without any Al₂O₃ segregation. The flexural strength and the fracture toughness remained almost unchanged with the increase in the Al₂O₃ phase. The addition of Al₂O₃ particles to the Al₂O₃–YAP eutectic particles enabled the matrix phase to change from the YAG phase to the Al₂O₃ phase.     

Difference in the outdoor performance of bulk and thin-film silicon-based photovoltaic modules

Differences in the outdoor performances of bulk (multi- and single-crystalline Si) and thin-film (amorphous Si(a-Si), a-Si/micro-crystalline Si and a-Si/a-SiGe/a-SiGe) photovoltaic (PV) modules are analyzed. The influence of module temperature and solar spectrum distribution on the PV output is clarified. The PV outputs almost only depend on module temperature in bulk-type Si PV modules while that depend both module temperature and spectrum distribution in thin-film ones. Also, the PV outputs of the bulk-type Si PV modules at most frequent condition at outdoor are lower than that at the standard test condition; in contrast, it was the other way round for thin-film ones.     

Design and performance evaluation of a haptic interface based on MR fluids for endovascular tele-surgery

Microsystem Technologies - In this paper, a magnetorheological (MR) fluids based haptic interface has been developed in master site to provide the haptic sensation to the interventionalist during...     

Preparation of new redox-active polyionenes with porphyrin units in the main chain

Quaternization of trans-dipyridylporphyrin with 1,4-butaneditrifluoromethane-sulfonate affords new polyionenes containing porphyrin units in the main chain. The polymers exhibit chemical and electrochemical reversible redox activities. Weitz-type two-step redox processes similar to those of viologens account for the redox properties of the polymers. Received: 26 November 1996/Revised: 24 January 1997/Accepted: 10 February 1997     

Boundary layer theory approach to the concentration layer adjacent to a ceiling wall of a hydrogen leakage: Far region

The field of the hydrogen leakage in partially open space can be divided into two main regions according to the importance of the hydrogen concentration distribution and the flow behavior. These two regions are the jet region and the boundary layer region which are adjacent to the ceiling wall of the space, resulting from impinging the hydrogen jet to the wall. The boundary layer region in turn can be divided into two regions, according to the modeling of the flow. These regions are the stagnation-point boundary layer region and the far boundary layer region. Previously, we studied the region of stagnation-point flow (Hiemenz flow) [El-Amin MF, Kanayama H. Boundary layer theory approach to the concentration layer adjacent to a ceiling wall at impinging region of a hydrogen leakage. Int J Hydrogen Energy, in press.]. The current paper is devoted to analyze the far region of the boundary layer adjacent to the ceiling wall using the boundary layer theory. Also, an experiment has been conducted on the hydrogen leakage in partially open space to estimate the concentration distribution vertically at the center of the domain under the ceiling wall. In order to verify the boundary layer theory approach, a comparison between the measurements and the boundary layer theory approximations is investigated and the results showed a good agreement. The wall shear stress, the local friction factor, the friction drag and the non-dimensional drag coefficient of the ceiling wall are calculated. Also, both momentum and concentration boundary layer thicknesses are estimated.