Ab initio calculation of the BCC Fe–Al–Mo (Iron–Aluminum–Molybdenum) phase diagram: Implications for the nature of the phase

The metastable phase diagram of the BCC-based ordering equilibria in the Fe–Al–Mo system has been calculated via a truncated cluster expansion, through the combination of Full-Potential-Linear augmented Plane Wave (FP-LAPW) electronic structure calculations and of Cluster Variation Method (CVM) thermodynamic calculations in the irregular tetrahedron approximation. Four isothermal sections at 1750 K, 2000 K, 2250 K and 2500 K are calculated and correlated with recently published experimental data on the system. The results confirm that the critical temperature for the order–disorder equilibrium between Fe₃Al–D0₃ and FeAl–B2 is increased by Mo additions, while the critical temperature for the FeAl–B2/A2 equilibrium is kept approximately invariant with increasing Mo contents. The stabilization of the Al-rich A2 phase in equilibrium with overstoichiometric B2–(Fe,Mo)Al is also consistent with the attribution of the A2 structure to the τ₂ phase, stable at high temperatures in overstoichiometric B2–FeAl.     

Influence of molecular tilt angle on the SHG response of pyroelectric liquid crystal polymers

Second harmonic generation in novel pyroelectric liquid crystal polymers (PLCP) made from a series binary mixtures, was studied using 1100 nm as the fundamental wavelength. The PLCPs were prepared by photo-polymerization of binary mixtures of two monomers which exhibit a smectic C^* phase, A2c (4″-(R)-(−)-2-[(10-acrylo-yloxy)decyl]oxy-3-nitrophenyl 4-{4′-[(11-acryloyloxy)-undecyloxy]phenyl}benzoate) and Alb (4″-((R)-(+)-2-octyloxy)-3″-nitrophenyl 4-(4′-(11-acryloyloxy)undecyloxy)-phenyl)-benzoate). The highest d₁₆ and d₂₃ coefficients were found to be in the range 0.65–0.8 pm/V, and differed depending on the detailed preparation of the sample. All cases of polymers formed from the chiral smectic C* phase showed an SHG-signal with no external field present, indicating that polar order became fixed. The SHG-signal was found to increase with the tilt angle of the FLC molecules.     

Validation of the performance of a GMO multiplex screening assay based on microarray detection

A new screening method for the detection and identification of GMO, based on the use of multiplex PCR followed by microarray, has been developed and is presented. The technology is based on the identification of quite ubiquitous GMO genetic target elements first amplified by PCR, followed by direct hybridisation of the amplicons on a predefined microarray (DualChip^® GMO, Eppendorf, Germany). The validation was performed within the framework of a European project (Co-Extra, contract no 007158) and in collaboration with 12 laboratories specialised in GMO detection. The present study reports the strategy and the results of an ISO complying validation of the method carried out through an inter-laboratory study. Sets of blind samples were provided consisting of DNA reference materials covering all the elements detectable by specific probes present on the array. The GMO concentrations varied from 1% down to 0.045%. In addition, a mixture of two GMO events (0.1% RRS diluted in 100% TOPAS19/2) was incorporated in the study to test the robustness of the assay in extreme conditions. Data were processed according to ISO 5725 standard. The method was evaluated with predefined performance criteria with respect to the EC CRL method acceptance criteria. The overall method performance met the acceptance criteria; in particular, the results showed that the method is suitable for the detection of the different target elements at 0.1% concentration of GMO with a 95% accuracy rate. This collaborative trial showed that the method can be considered as fit for the purpose of screening with respect to its intra- and inter-laboratory accuracy. The results demonstrated the validity of combining multiplex PCR with array detection as provided by the DualChip^® GMO (Eppendorf, Germany) for the screening of GMO. The results showed that the technology is robust, practical and suitable as a screening tool.     

世界上第一条新型气体绝缘高压输电线路

介绍瑞士日内瓦机场的气体绝缘输电线路（GIL）工程,涉及工程的系统设计、技术指标和施工方法等。阐述GIL具有运营成本低、安全性和可靠性高、电磁场强度低和无老化等优越性。     

Carbon nanowalls deposited by inductively coupled plasma enhanced chemical vapor deposition using aluminum acetylacetonate as precursor

Well aligned carbon nanowalls, a few nanometers thick, were fabricated by continuous flow of aluminum acetylacetonate (Al(acac)₃) without a catalyst, and independent of substrate material. The nanowalls were grown on Si, and steel substrates using inductively coupled plasma-enhanced chemical vapor deposition. Deposition parameters like flow of argon gas and substrate temperature were correlated with the growth of carbon nanowalls. For a high flow of argon carrier gas, an increased amount of aluminum in the film and a reduced lateral size of the carbon walls were found. The aluminum is present inside the carbon nanowall matrix in the form of well crystallized nanosized Al₄C₃ precipitates.     

Simultaneous determination of daidzein, equol, genistein and bisphenol A in human urine by a fast and simple method using SPE and GC-MS

Human diet contains weakly estrogenic compounds such as daidzein (DAI) and genistein (GEN), phytoestrogens present in soy and many vegetables as well as bisphenol A (BPA), a contaminant from packing materials and plastic containers for foods and beverages. In light of concerns about hormonally active agents, biomonitoring methods are needed to assess human exposure to such compounds. A method for simultaneous determination of DAI, its metabolite equol (EQ), GEN, and BPA by GC-MS analysis was established, validated and applied to measure concentrations in human urine. Sample preparation involves enzymatic conjugate cleavage, SPE and derivatization by silylation. For GC/MS analysis, deuterated DAI and GEN and( 13)C-BPA are used as internal standards. LOD are 4, 4, 5 and 3 ng/mL urine for DAI, EQ, GEN and BPA, respectively. Interassay variations were 9% for DAI, 15% for EQ, 18% for GEN and 10% for BPA. Simple workup and accuracy of the method are suited for biomonitoring. An analysis of urine samples from 15 adults consuming typical German food revealed dietary exposure to phytoestrogens in all samples: GEN concentrations ranged between 13 and 238 ng/mL, those for DAI ranged from 12 to 356 ng/mL. More than half of the individuals excreted also the more estrogenic metabolite EQ, at levels of 8-128 ng/mL. Higher concentrations (GEN: 820, DAI: 960 and EQ: 1740 ng/mL) were measured in a 24 h urine sample upon ingestion of soy protein (50 g with 12.9 mg DAI and 25.2 mg GEN). Only urine collected after some days on strict phytoestrogen-free diet had undetectable isoflavone levels. BPA was detected in 9 of 15 urine samples ranging from 3 to 11 ng/mL, and at 55 ng/mL in one sample. In conclusion, a reliable method to determine BPA and isoflavones in urine was established and applied in a pilot study: Biomonitoring results show much higher dietary exposure to phytoestrogens than to BPA in German adults.     

Development of a qualitative test method for the cleanability of polymer woven filter media

In this paper a new method for cleaning of filter media is presented, and the cleanability with different textures and surface finishes is compared. With the method described, it is possible to evaluate the quality of the cleaning process. According to the German VDMA standard cleaning test, riboflavin and malt extract are applied as model contaminants for evaluation of the cleaning results. To compare the cleanability of filter media with different properties and geometries the results are adapted to the law of mass transfer and to the Sherwood number, a dimensionless parameter describing the quality of a cleaning process.