Trennung von Muskelprotein, Kollagen und Elastin durch fraktionierte Extraktion mit Na-dodecylsulfat(SDS)-L?sungen

Zusammenfassung Die fraktionierte Extraktion mit Na-dodecylsulfat(SDS)-Lösungen ermöglicht die Trennung von Muskel- und Bindegewebs-Protein. In einem zweiten Schritt kann auch Kollagen von Elastin getrennt werden. Muskelprotein löst sich unter Schütteln bei Zimmertemperatur in einer SDS(2%)-ME(1%)-Lösung in einem Boratpuffer pH 9. Zur Lösung des Kollagens sind 100°C, intensives Rühren und eine SDS(8%)-ME(1%)-Lösung in einem Citratpuffer pH 5 notwendig. Das Verfahren wurde an nativem und hitzedenaturiertem Material angewendet. Die Möglichkeit zur Bestimmung des BEFFE-Wertes in Brühwürsten mit dieser Methode wird untersucht und die Anwendung auf andere Fleischprodukte diskutiert.

---

Fractionation of muscle protein, collagen and elastin by extraction with buffers containing dodecylsulfat (SDS)

Summary Dodecylsulfate (SDS) containing buffers were used for stepwise extraction of proteins from muscle and connective tissue. The first step was done at room temperature with borate buffer pH 9 and the muscle proteins were extracted. The second treatment (citrate buffer pH 5 at 100°C) dissolved collagen and left elastin as residue. All extracts were analysed by electrophoresis to identify the proteins and evaluated by a biuret method insensitive to SDS and ME. This method was applied to native and heatdenatured proteins and to Brühwdrste. The possibility of applying this method to the determination of the BEFFE-content is discussed.

---

Benutzte Abkürzungen NPN Nichteiweißstickstoffverbindungen - ATM Acetontrockenmasse - BEFFE bindegewebseiweißfreies Fleischeiweiß - OH-Pro Hydroxyprolin - SDS Natrium(Sodium)-dodecylsulfat - ME 2-Mercapto-äthanol - Tris Tris-(hydroxymethyl)aminomethan - PAGE Polyacrylamid-Gelelektrophorese - Vk Variationskoeffizient - S Standardabweichung - Mittelwert Die Arbeit ist Teil der Dissertation von I. de WreedeWir danken der Deutschen Forschungsgemeinschaft für ihre finanzielle Unterstützung und Herrn Dr. H. H. Heinert, Leiter des Staatl. Veterinär-Untersuchungsamtes Braunschweig, der freundlicherweise die Brühwurstproben zur Verfügung gestellt hat     

A proximate-time-optimal-control design and its application to a hard disk drive dual-stage actuator system

We propose a compensator-based strategy for design of a track-seeking and track-following control system for a dual-stage servo actuator in hard disk drives. A well-known decoupling structure is employed to disconnect the control of the primary voice coil motor (VCM) actuator from the loop for a secondary high-bandwidth actuator. The compensator is placed in the secondary loop and suitably combined with a saturation nonlinearity in order to obtain actuator signal boundedness. The design procedure consists of four steps: 1) design of an established nonlinear seek-settle-track following controller for the VCM; 2) design of a linear track following controller for the secondary actuator; 3) observer design; and 4) design of a compensator to retain global stability and to improve performance. The proposed control system improves performance of both long-span seeking (proximate-time-optimal controller) and short-span seeking. In addition, it achieves high-bandwidth track following performance. The experimental results show good track-following performance, and short-span/long-span-seeking performance with fast settling time. The overshoot during track seeking can be made negligible for a suitably tuned VCM-actuator control loop.     

Print your atomic force microscope

Progress in scanning probe microscopy profited from a flourishing multitude of new instrument designs, which lead to novel imaging modes and as a consequence to innovative microscopes. Often these designs were hampered by the restrictions, which conventional milling techniques impose. Modern rapid prototyping techniques, where layer by layer is added to the growing piece either by light driven polymerization or by three-dimensional printing techniques, overcome this constraint, allowing highly concave or even embedded and entangled structures. We have employed such a technique to manufacture an atomic force microscopy (AFM) head, and we compared its performance with a copy milled from aluminum. We tested both AFM heads for single molecule force spectroscopy applications and found little to no difference in the signal-to-noise ratio as well as in the thermal drift. The lower E modulus seems to be compensated by higher damping making this material well suited for low noise and low drift applications. Printing an AFM thus offers unparalleled freedom in the design and the rapid production of application-tailored custom instruments.     

Influence of ring-type internals on the solids residence time distribution in the fuel reactor of a dual circulating fluidized bed system for chemical looping combustion

The intensification of gas-solids contact in the fuel reactor of a chemical looping combustion system is enhanced with the installation of ring-type internals. This can be a key issue for achieving the necessary fuel conversion rates. Wedged rings, previously designed and tested, were found to increase the particle concentration in the counter current section of the fuel reactor and hence, to achieve a more homogeneous particles concentration along this zone. The present work investigates the effect of the mentioned internals on the residence time distribution of particles in the fuel reactor of a dual circulating fluidized bed system for chemical looping. The study was carried out in a cold flow model especially designed for the fluid-dynamic analysis of the system equipped with a recently developed residence time measurement device based on the detection of ferromagnetic tracer particles through inductance measurement. Ring internals proved the positive effect on the particles residence time, the residence time distribution is more symmetric and shows lower dispersion, the flow pattern is more plug-flow-like, these effects are intensified with the reduction of the aperture ratio of the rings. On the other hand, the upward particle transport in the counter-current zone of the fuel reactor also increases with the installation of the rings, increasing the bypass flow of solids through the fuel reactor's return loop (internal circulation). For high internal circulation rates the solids residence time distribution of the fuel reactor is dominated by the bypass effect. The findings may be used for focused design improvement of the investigated fluidized bed system.     

Nanoporous gold bumps for low temperature bonding

Nanoporous gold bumps have been deposited on silicon wafers by electroplating a silver–gold alloy followed by etching the silver. An open-porous cellular structure of gold at meso-scale is left on top of the bumps. For flip chip bonding we found low temperature and low force bonding conditions. The porous interconnects have very promising properties, like compressibility and reduced stiffness, which should result in higher bond yield and extended reliability.