晶闸管式等离子弧切割机的使用与维修

本文介绍了晶闸管式等离子弧切割机的操作原理、使用和维修技术。     

批评要讲究方法

约翰·卡尔文·柯立芝于1923年当选为美国总统.这位总统以少言寡语而出名,常被人们称作"沉默的卡尔文",可是,他处理起问题来却是相当圆滑. 柯立芝有一位非常漂亮的女秘书,但她工作经常出现差错.一天早晨,他看见女秘书走进办公室,便对她说:"今天你穿的这身衣服真漂亮,正适合你这样年轻漂亮的小姐."女秘书受宠若惊,柯立芝接着说:"但你不要骄傲,我相信你处理的公文也能和你一样漂亮."果然从那天起,女秘书处理公文时很少出错.     

用攀枝花钛矿和云南钛矿冶炼钛渣工业试验研究

通过磁性测量和X-射线衍射研究了Gd2(Co，Al)17化合物的结构和磁晶各向异性。当x≤4时，样品具有菱方Th2znl7型结构，x=5时，具有六方CaCu5型结构。随着Al浓度增加，晶格常数和单胞体积单调增大，而居里温度和自发磁化强度近似线性地减小；在x≥l时，观察到Co亚点阵的磁晶各向异性变号，室温易磁化方向由易面转变为易轴，且易轴各向异性场和各向异性常数随Al原子浓度增加出现极大值；基于补偿温度(65K)下自由粉末颗粒的磁化曲线，导出了亚点阵间的分子场系数和Gd-co交换耦合常数，结果表明，Al原子对Gd-Co交换耦合作用的影响较小。根据Al原子在Co亚点阵4种晶位的择优占位，分析了磁晶各向异性的演变。     

压力容器环缝焊接自动跟踪系统的研究

作者研制了一种新型摆动式电弧传感器及其焊缝自动跟踪系统。采用计算机控制，成功地应用于压力容器的环缝脉冲ＭＡＧ焊工艺。实践证明采用这种系统跟踪精度高并获得了优质焊缝。     

Properties and Microstructuresof Three Kinds of Silversheathed Bi-2223 Tapes

ＰｒｏｐｅｒｔｉｅｓａｎｄＭｉｃｒｏｓｔｒｕｃｔｕｒｅｓｏｆＴｈｒｅｅＫｉｎｄｓｏｆＳｉｌｖｅｒｓｈｅａｔｈｅｄＢｉ－２２２３ＴａｐｅｓＺｅｎｇＲｏｎｇ；ＺｈｏｕＹｉｒｕ；ＹｅＢｉｎ；ＺｈｏｕＭｉｎ；ＺｈａｎｇＪｉａｎｇｕｏ（曾荣）（周贻茹）（叶斌）...     

铣削刀片用纳米改性金属陶瓷的显微组织和力学性能

研究了铣削刀片用纳米改性金属陶瓷的显微组织与力学性能。SEM观察结果表明,铣削刀片用纳米改性金属陶瓷组织仍由陶瓷相和金属相组成,其中粗大的陶瓷相颗粒为芯/壳结构;Mo元素添加能有效细化金属陶瓷陶瓷基体组织。抗弯测试表明,随金属相含量增加,金属陶瓷的抗弯强度和断裂韧性增加,而硬度则降低;断口分析可知,沿晶断裂为其主要的断裂方式。     

纳米TiN改性金属陶瓷刀片的铣削性能

制备了两种纳米TiN改性金属陶瓷可转位铣刀片ToolA和ToolB。研究了这两种新型面铣刀在切削正火态45#钢时的铣削性能及其失效机理。试验结果表明,两种试验铣刀片在Vc=294m/min,fz=0.16mm/z,ap=0.5mm条件下铣削45#钢时,均未发现“崩刃”现象,并全都以“磨损”的形式失效,刀具寿命较长。此外,在同样切削条件下,ToolA具有良好的抗氧化磨损性能,而ToolB有更高的耐机械冲击能力;高温扩散和氧化磨损成为导致纳米TiN改性铣刀片磨损失效的主要原因。     

Effect of heat treatment on the microstructure and hardness of C-Cr-W-Mo-V-RE Fe-based hardfacing layer

0IntroductionHot-rollers and scissors are the critical parts of thesteel rolling equipments.At present,the surface soften-ing,the early wearing and the tearing are the primary rea-sons for the lowservice life of the hot-rollers and scissors.Although hardfacing has been applied to repaire the partseasily being worn and torn,such as the hot-rollers and thescissors,and has been obtained economic benefits[1-3],this technology has common problem:if the hardfacing lay-er contains more excessive allo…     

低熔点Cu-P基中间合金及其变质效果

利用差示扫描量热仪(DSC)、扫描电子显微镜(SEM)和金相显微镜等手段对Cu-P基中间合金进行了研究。结果表明，在二元共晶Cu-P中间合金中加入一定量的Sn可制成低熔点的Cu-16Sn-8P中间合金；在此基础上研制出一种熔点为630℃左右的低熔点的多元Cu-P基中间合金。与Cu-P中间合金相比，该低熔点多元Cu-P基中间合金对过共晶AI-24Si合金具有更好的变质效果。同时，该中间合金对ZL109合金也具有良好的变质效果。     

Microstructural modeling approach applied to rock material

The importance of the microstructural parameters in rock mechanical behavior has been investigated by several authors. Moreover, the Weibull statistical model has been used to characterize the heterogeneity of several materials on the basis of the concept that the microscopic defects within the material determine their mechanical strength. The modeling of different rocks is a topic that is fundamental for the prediction of rock fragmentation. In this article, the analysis of rock microstructure is performed using the microstructural modeling approach, which consists of the simplification, quantification, and modeling of the main properties of rock microstructure. The grain size, grain shape, and microcracks are modeled by means of statistical density functions, namely, Cauchy, chi-squared, exponential, extreme value, gamma, Laplace, normal, uniform, and Weibull. It is found that the Weibull distribution is the most appropriate statistical model of the grain size and grain shape, when compared with the other eight statistical models. Regarding microcracks, the results show that the gamma distribution is the most appropriate model. The Weibull and gamma distributions are then used to analyze the heterogeneity of the microstructure. This is done by comparison of the statistical models of each microstructural property evaluated in several thin sections of the same rock. It is found that with respect to grain size and grain shape, the rock is homogeneous, while the size distribution of the microcracks shows a clear trend toward less homogeneity. The microstructural modeling approach is important for modeling, characterizing, and analyzing the microstructure of rock material. Among other applications, it can be used to explain differences in the mechanical behavior obtained in testing several specimens.