Assessment of hemodynamic changes in rat stomachs by laser Doppler velocimetry and reflectance spectrophotometry. Effects of ethanol and prostaglandin E2 under ischemic and congestive conditions

One of the ulcerogenic mechanisms by which ethanol induces mucosal lesions in the stomach is the depression of gastric mucosal blood flow (GMBF). The goal of this study was to determine whether lesion formation is the result of vascular ischemia alone or ischemia combined with congestion. The aims of this study were to answer this question by evaluating the relationship between GMBF, oxygen saturation (ISO2) and hemoglobin volume (IHb) in the gastric mucosa under the influences of ethanol and prostaglandin E2 (PGE2) in the ischemic and congestive states, using a laser Doppler flowmeter and tissue spectrum analyzer. Ligation of the gastric celiac artery or vein markedly decreased the GMBF and the ISO2 level. The former procedure also reduced but the latter increased the IHb level. Ethanol administration produced effects similar to venous ligation, i.e. vascular stasis with ischemia. There was a negative correlation between GMBF and severity of lesion formation after ethanol administration. However, at the lesion site all the hemodynamic parameters were significantly reduced, indicating that a necrotic condition had occurred. PGE2 preincubation (25 micrograms) elevated GMBF, ISO2 and IHb levels. It also alleviated the reduction of blood flow induced by ethanol and increased the recovery rate of GMBF and ISO2 after the release of arterial or venous ligation. It is concluded that the decrease in blood flow due to ethanol is probably caused by constriction of venules rather than arterioles inside the mucosa, and this effect could lead to vascular congestion. PGE2 probably dilates both arterioles and venules in the gastric mucosa and thereby increases the blood flow in the gastric mucosa.(ABSTRACT TRUNCATED AT 250 WORDS)     

Interfacing a hydrological model with the RAISON expert system

The RAISON expert system allows for the interactive analysis of spatial data related to water resources investigations. A conceptual design for the interface between the RAISON expert system and hydrological model includes functions for the simulation of runoff. Design criteria include ease of use, minimal equipment requirements, a generic data base management system, and use of a micro computer. An application is demonstrated for Northeast Pond River watershed, Newfoundland, that performs to predict the runoff.     

Application of a Statistical Model Updating Approach on Phase I of the IASC-ASCE Structural Health Monitoring Benchmark Study

This paper addresses the problem of structural health monitoring (SHM) and damage detection based on a statistical model updating methodology which utilizes the measured vibration responses of the structure without any knowledge of the input excitation. The emphasis in this paper is on the application of the proposed methodology in Phase I of the benchmark study set up by the IASC–ASCE Task Group on structural health monitoring. Details of this SHM benchmark study are available on the Task Group web site at 〈http://wusceel.cive.wustl.edu/asce.shm〉. The benchmark study focuses on important issues, such as: (1) measurement noise; (2) modeling error; (3) lack of input measurements; and (4) limited number of sensors. A statistical methodology for model updating is adopted in this paper to establish stiffness reductions due to damage. This methodology allows for an explicit treatment of the measurement noise, modeling error, and possible nonuniqueness issues characterizing this inverse problem. The paper briefly describes the methodology and reports on the results obtained in detecting damage in all six cases of Phase I of the benchmark study assuming unknown (ambient) data. The performance, limitations, and difficulties encountered by the proposed statistical methodology are discussed.     

A modular control scheme for PMSM speed control with pulsating torque minimization

In this paper, a modular control approach is applied to a permanent-magnet synchronous motor (PMSM) speed control. Based on the functioning of the individual module, the modular approach enables the powerfully intelligent and robust control modules to easily replace any existing module which does not perform well, meanwhile retaining other existing modules which are still effective. Property analysis is first conducted for the existing function modules in a conventional PMSM control system: proportional-integral (PI) speed control module, reference current-generating module, and PI current control module. Next, it is shown that the conventional PMSM controller is not able to reject the torque pulsation which is the main hurdle when PMSM is used as a high-performance servo. By virtue of the internal model, to ify the torque pulsation it is imperative to incorporate an internal model in the feed-through path. This is achieved by replacing the reference current-generating module with an iterative learning control (ILC) module. The ILC module records the cyclic torque and reference current signals over one entire cycle, and then uses those signals to update the reference current for the next cycle. As a consequence, the torque pulsation can be reduced significantly. In order to estimate the torque ripples which may exceed certain bandwidth of a torque transducer, a novel torque estimation module using a gain-shaped sliding-mode observer is further developed to facilitate the implementation of torque learning control. The proposed control system is evaluated through real-time implementation and experimental results validate the effectiveness.     

Effects of convergent flow on in situ fibrillation of TLCP in PEN

A polymer melt entering a capillary die from a cylinder undergoes a convergent flow in which there is a complex combination of extensional and shear flows. The convergent flow plays an important role in controlling the in situ fibrillation of thermotropic liquid crystalline polymer (TLCP) in a thermoplastic matrix melt. This study examines effects of the convergent flow on development of TLCP fibrils in a TLCP/poly(ethylene naphthalate) (PEN) blend. A capillary rheometer was used and the extent of the convergent flow was varied by changing capillary dimension and shear rate. With a given capillary die, the TLCP fibrillation was found to increase with increasing shear rate because of the increased deformation of TLCP droplets. The establishment of a fully developed shear velocity profile by using a relatively long die is considered to be necessary to retain the TLCP fibrils initiated in the convergent flow region. At a given high shear rate, TLCP fibrillation improves with increasing capillary diameter (≤2 mm) because of the increased difference in velocity between the capillary and the cylinder. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1505–1513, 2004     

Evaluation of the crispening effect using CRT‐displayed colour samples

In this study, the crispening effect was clearly observed when 38 neutral‐coloured sample pairs with only lightness differences were assessed under 5 neutral backgrounds of different lightness values. The sample pairs are CRT‐based colours, and they are selected along the CIELAB L* axis from 0 to 100. The magnitude of colour difference of each pair is 5.0 CIELAB units. The visual assessment results showed that there is a very large crispening effect. The colour differences of the same pair assessed under different backgrounds could differ by a factor of up to 8 for a sample pair with low lightness. The perceived colour difference was enlarged when the lightness of a sample pair was similar to that of the background. The extent of crispening effect and its quantification are discussed in this investigation. The performances of five colour‐difference equations were also tested, including the newly developed CIEDE2000. © 2004 Wiley Periodicals, Inc. Col Res Appl, 29, 374–380, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20045     

Real-time block transfer under a link-sharing hierarchy

Most application data units are too large to be carried in a single packet (or cell) and must be segmented for network delivery. To an application, the end-to-end delays and loss rate of its data units are much more relevant performance measures than ones specified for individual packets (or cells). The concept of a burst (or block) was introduced to represent a sequence of packets (or cells) that carry an application data unit. We describe how a real-time variable bit-rate (VBR) service, with quality of service (QoS) parameters for block transfer delay and block loss rate, can be provided by integrating concepts and delay guarantee results from our previous work on burst scheduling, together with ideas from asynchronous transfer mode (ATM) block transfer. Two new contributions are presented herein. First, we design an admission control algorithm to provide the following two classes of service: bounded-delay block transfer with no loss, and bounded-delay block transfer at a specified block loss rate. Secondly, we show how to extend existing end-to-end delay bounds to networks with hierarchical link sharing     

Detection of flaws in sandwich plates

A technique is presented to characterize rectangular flaws in sandwich plates. The scattered wave fields in the frequency domain for sandwich plates with rectangular flaws are calculated by using the strip element method. In the present technique, the length of a rectangular flaw in a sandwich plate is determined from the displacement distribution curve on the upper surface of the plate. The damage factor of the flaw is determined from the mean value of the peaks of the additional oscillations on the displacement distribution curves. An approximate polynomial formula of degree three for the prediction of the damage factor of flaws in sandwich plates is also proposed. Numerical experiments are made to demonstrate the present technique.