A New Total Flooding Test Procedure for Evaluating Fire-Suppressant Agents

A simple laboratory apparatus is described for observing the performance of fire extinguishing agents in total flooding applications. Known compositions of agents mixed with dry air are prepared in a 2 L glass combustion flask, and a flame fed by propane, butane, or other gaseous fuel from a pressure cylinder is inserted into the flask through a standard taper joint. Burning times to extinguishment are measured, both in the absence and presence of added physical or chemical agents. From the known rate of propane burning and initial compositions, the percentages of gas volume in the combustion flask at extinguishment are calculated for each burning time. Agents that are not sufficiently volatile to be investigated with the ordinary cup burner method are readily studied with the new technique.An adiabatic flame temperature model previously used to correlate cup burner test results has been applied to obtain limiting agent percentages required for total flooding extinguishment and to accurately predict the effect on burning time of different concentrations of physical and chemical agents and other gases in the flask.     

Random-phase-shift Fizeau interferometer

A new and potentially cost efficient kind of vibration-tolerant surface measurement interferometer based on the Fizeau-principle is demonstrated. The crucial novelty of this approach is the combination of two optoelectronic sensors: an image sensor with high spatial resolution and an arrangement of photodiodes with high temporal resolution. The photodiodes continuously measure the random-phase-shifts caused by environmental vibrations in three noncollinear points of the test surface. The high spatial resolution sensor takes several "frozen" images of the test surface by using short exposure times. Under the assumption of rigid body movement the continuously measured phase shifts of the three surface points enable the calculation of a virtual plane that is representative for the position and orientation of the whole test surface. For this purpose a new random-phase-shift algorithm had to be developed. The whole system was tested on an optical table without vibration isolation under the influence of random vibrations. The analysis of the root-mean-square (RMS) over ten different measurements shows a measurement repeatability of about 0.004 wave (approximately 2.5 nm for 632.8 nm laser wavelength).     

Compound prism design principles, II: triplet and Janssen prisms

Continuing the work of the first paper in this series [Appl. Opt. 50, 4998-5011 (2011)], we extend our design methods to compound prisms composed of three independent elements. The increased degrees of freedom of these asymmetric prisms allow designers to achieve greatly improved dispersion linearity. They also, however, require a more careful tailoring of the merit function to achieve design targets, and so we present several new operands for manipulating the compound prisms' design algorithm. We show that with asymmetric triplet prisms, one can linearize the angular dispersion such that the spectral sampling rate varies by no more than 4% across the entire visible spectral range. Doing this, however, requires large prisms and causes beam compression. By adding a beam compression penalty to the merit function, we show that one can compromise between dispersion linearity and beam compression in order to produce practical systems. For prisms that do not deviate the beam, we show that Janssen prisms provide a form that maintains the degrees of freedom of the triplet and that are capable of up to 32° of dispersion across the visible spectral range. Finally, in order to showcase some of the design flexibility of three-element prisms, we also show how to design for higher-order spectral dispersion to create a two-dimensional spectrum.     

Two-finger (TF) SPUDT cells

SPUDT cells including two fingers are only known thus far for so-called NSPUDT directions. In that case, usual solid-finger cells are used. The purpose of the present paper is to find SPUDT cell types consisting of two fingers only for pure mode directions. Two-finger (TF) cells for pure mode directions on substrates like 128°YX LiNbO(3) and YZ LiNbO(3) were found by means of an optimization procedure. The forward direction of a TF-cell SPUDT on 128°YX LiNbO(3) was determined experimentally. The properties of the new cells are compared with those of conventional SPUDT cells. The reflectivity of TF cells on 128°YX LiNbO(3) turns out to be two to three times larger than that of distributed acoustic reflection transducer (DART) and Hanma-Hunsinger cells at the same metal layer thickness.     

Onset of smoldering in cotton: Effects of density

The ignition temperature for smoldering in cotton has been determined for several densities. Experiments and consistent theoretical calculations show that an increase in density leads to decrease in ignition temperature. Experimentally it is found that repeated heating of a cotton sample results in a higher ignition temperature than for samples heated once, as a result of partial decomposition during heating. For the lowest density investigated, smoldering occurs but is not self-sustained. The smoldering front moves through the cotton with a velocity independent of the density. The mass loss rate due to smoldering increases with density. It can be concluded that density affects both the ignition temperatures and the mass loss rates in a systematic way.     

Differential regulation of mitogen-activated protein kinases by microtubule-binding agents in human breast cancer cells

Drug design targeted at microtubules has led to the advent of some potent anti-cancer drugs. In the present study, we demonstrated that microtubule-binding agents (MBAs) taxol and colchicine induced immediate early gene (c-jun and ATF3) expression, cell cycle arrest, and apoptosis in the human breast cancer cell line MCF-7. To elucidate the signal transduction pathways that mediate such biological activities of MBAs, we studied the involvement of mitogen-activated protein (MAP) kinases. Treatment with taxol, colchicine, or other MBAs (vincristine, podophyllotoxin, nocodazole) stimulated the activity of c-jun N-terminal kinase 1 (JNK1) in MCF-7 cells. In contrast, p38 was activated only by taxol and none of the MBAs changed the activity of extracellular signal-regulated protein kinase 2 (ERK2). Activation of JNK1 or p38 by MBAs occurred subsequent to the morphological changes in the microtubule cytoskeleton induced by these compounds. Furthermore, baccatine III and beta-lumicolchicine, inactive analogs of taxol and colchicine, respectively, did not activate JNKI or p38. These results suggest that interactions between microtubules and MBAs are essential for the activation of these kinases. Pretreatment with the antioxidants N-acetyl-L-cysteine (NAC), ascorbic acid or vitamin E, blocked H2O2- or doxorubicin-induced JNKI activity, but had no effect on JNKI activation by MBAs, excluding a role for oxidative stress. However, BAPTA/AM, a specific intracellular Ca2+ chelator, attenuated JNK1 activation by taxol but not by colchicine, and had no effect on microtubule changes induced by taxol. Thus, stabilization or depolymerization of microtubules may regulate JNK1 activity via distinct downstream signaling pathways. The differential activation of MAP kinases opens up a new avenue for addressing the mechanism of action of antimicrotubule drugs.     

Robust vector quantization by a linear mapping of a block code

In this paper we propose a novel technique for vector quantizer design where the reconstruction vectors are given by a linear mapping of a binary block code (LMBC). The LMBC framework provides a relation between the index bits and the reconstruction vectors through mapping properties. We define a framework, show its flexibility, and give optimality conditions. We consider source optimized vector quantization (VQ), where the objective is to directly obtain a VQ with inherent good channel robustness properties. Several instructive theoretical results and properties of the distortion experienced due to channel noise are demonstrated. These results are used to guide the design process. Both optimization algorithms and a block code selection procedure are devised. Experimental results for Gauss-Markov sources show that quantization performance close to an unconstrained VQ is obtained with a short block code which implies a constrained VQ. The resulting VQs have better channel noise robustness than conventional VQs designed with the generalized Lloyd algorithm (GLA) and splitting initialization, even when a post-processing index assignment algorithm is applied to the GLA-based VQ. We have, thus, demonstrated a unique method for direct design resulting in an inherent good index assignment combined with small losses in quantization performance