Simulation of polarization converter formed by poling-inducedpolymer waveguides

A polarization converter using electrooptic (EO) polymer waveguides is proposed and it is simulated by a full vectorial beam propagation method (VBPM) for anisotropic medium. First, an efficient structure of poling electrodes is proposed for the fabrication of TE-mode poling-induced waveguides in EO polymer. For given electrode structures of both TE-mode and TM-mode waveguides, poling-induced dielectric tensors are calculated by the finite-element method to provide refractive index distribution, data for VBPM simulation. It is shown numerically that the poled TE and TM mode waveguides work efficiently as the corresponding polarization filters. Then, new poling electrodes are suggested to fabricate a waveguide device formed by connecting the TE and TM mode waveguides adiabatically with a slowly varying structure. This waveguide device has the optic axis slowly rotating as one moves along the propagation direction, so that it will act as polarization converter. VBPM simulation shows that the polarization of the guided mode rotates following the optic axis distribution. Polarization conversion is demonstrated successfully with high conversion efficiency and low excess loss     

Chemical processing and characterization of spinel-type thermistor powder in the Mn-Ni-Fe oxide system

The coprecipitated Mn-Ni-Fe oxalate was prepared from the mixed sulfate solution by optimum pH control. The chemical composition agreed well with that of the starting solution, and the thermal decomposition of the Mn-Ni-Fe oxalate in air below 600 °C led to the direct formation of cubic spinel phase with fine particle size. The sinterability of the calcined powder, the stability of cubic spinel phase and the influence of annealing temperature on electrical properties of the sintered bodies, were investigated.     

High-Temperature Chemical Stability of Plasma-Sprayed Ca05Sr05Zr4P6O24 Coatings on Nicalon/SiC Ceramic Matrix Composite and Ni-Based Superalloy Substrates

The potential application of Ca05Sr05Zr4P6O24 (CS50) as a corrosion-resistant coating material for Si-based ceramics and as a thermal barrier coating material for Ni-based superalloys was explored. A ∼200 (xm thick CS50 coating was prepared by air plasma spray with commercially available powder. A Nicalon/SiC ceramic matrix composite and a Ni-based superalloy coated with a ∼200 (xm thick metallic bond coat layer were used as substrate materials. Both the powder and coating contained ZrP2O7 as an impurity phase, and the coating was highly porous as-deposited. The coating deposited on the Nicalon/SiC substrate was chemically stable upon exposure to air and Na2SO4/O2 atmospheres at 1000°C for 100 h. In contrast, the coating sprayed onto the superalloy substrate significantly reacted with the bond coat surface after similar oxidation in air.     

Stress relaxation in the interface between creep particle and elastic matrix-strengthening mechanism

The effect of a power law creep particle on interface behavior between the particle and elastic matrix is investigated by stress analysis. Using the results obtained through the stress analysis, the forces due to interaction of an applied stress and stress concentration with an edge dislocation are determined. The direct interaction between the edge dislocation and the creeping particle is studied under fully relaxed stress conditions. Through the investigation the following results are derived. Stress relaxation in the interface can be caused by power law creep along or by diffusion, or a combination of both mechanisms. The degree of stress relaxation caused by diffusion can be defined in terms of the relaxation time for both boundary diffusion and volume diffusion. The amount of stress relaxation caused by the power law creep particle is characterized by the quantity ₂ which is a function of Γ₀ = 2(1/√3)^{1 + m} × (σ_∞/2μ)^m(σ₀/σ_∞t^m), where m is strain rate hardening exponent, σ_∞ is applied stress, μ is the shear modulus, σ₀ is the material constant of the power law creep particle, and t is elapsed time. The value ₂ = 1.0 corresponds to the fully relaxed condition and ₂ = −0.6 corresponds to the initial state. The time to reach a fully relaxed condition is very sensitive to the strain rate exponent, with the smaller m values leading to longer times. The stress state of complete relaxation in the elastic matrix is equivalent to the solution of a void in an elastic matrix superposed on the solution of positive surface traction on the void. This result is identical to that obtained by Srolovitz et al. [Acta. Metall.32, 1979 (1984)]. When the stress is completely relaxed in the particle, all stress components (σ_r, σ_θand σ_rθ) are relaxed, while in the matrix relaxations are observed only for σ_rand σ_θ. The critical resolved shear stress and critical stress to climb the dislocation in the neighborhood of the particle exceed the Orowan stress. Also, the particle attracts the dislocation. Therefore the strengthening of a power law creep particle in an elastic matrix is caused by the Orowan mechanism and by attraction of the dislocation.     

Investigation on Ballistic Performance of Armor Ceramics against Long-Rod Penetration

A series of depth-of-penetration (DOF) tests are carried out to investigate the ballistic performance of armor ceramics. Based on the experimental results, an improved differential efficiency factor (DEF) is presented, which demonstrates that the general ballistic efficiency index is independent of the ceramic thickness. It is also shown that the density, internal friction, and compression strength of ceramics are crucial factors that affect the ballistic performance of ceramics significantly through the interaction between the long-rod projectiles and thick-tile armor. This article is based on a presentation made in the symposium entitled “Dynamic Behavior of Materials,” which occurred during the TMS Annual Meeting and Exhibition, February 25–March 1, 2007 in Orlando, Florida, under the auspices of The Minerals, Metals and Materials Society, TMS Structural Materials Division, and TMS/ASM Mechanical Behavior of Materials Committee.     

Development of a physics analysis procedure for the prismatic very high temperature gas-cooled reactors

A new physics analysis procedure has been developed for a prismatic very high temperature gas-cooled reactor based on a conventional two-step procedure for the PWR physics analysis. The HELIOS and MASTER codes were employed to generate the coarse group cross sections through a transport lattice calculation, and to perform the 3-dimensional core physics analysis by a nodal diffusion calculation, respectively. Physics analysis of the prismatic VHTRs involves particular modeling issues such as a double heterogeneity of the coated fuel particles, a neutron streaming in the coolant channels, a strong core-reflector interaction, and large spectrum shifts due to changes of the surrounding environment and state parameters. Double heterogeneity effect was considered by using a recently developed reactivity-equivalent physical transformation method. Neutron streaming effect was quantified through 3-dimensional Monte Carlo transport calculations by using the MCNP code. Strong core-reflector interaction could be handled by applying an equivalence theory to the generation of the reflector cross sections. The effects of a spectrum shift could be covered by optimizing the coarse energy group structure. A two-step analysis procedure was established for the prismatic VHTR physics analysis by combining all the methodologies described above. The applicability of our code system was tested against core benchmark problems. The results of these benchmark tests show that our code system is very accurate and practical for a prismatic VHTR physics analysis.     

Representation and uniformization of algebraic transductions

This paper explores different means of representation for algebraic transductions, i.e., word relations realized by pushdown transducers. The relevance of this work lies more in its point of view rather than any particular result. We are aiming at giving specific techniques for obtaining, or perhaps explaining, decompositions of algebraic (and incidentally, rational) relations, relying solely on their “machine” definition rather than some complex algebraic apparatus. From this point of view, we are hoping to have demystified the heavy formalism employed in the present literature. Some of the novelties of our work are: the use of “stack languages” and “embeddings,” which eliminate the need of arbitrary context-free languages in our characterizations, the study of uniformizations for algebraic transductions and the use of the so-called stack transductions for exposing the anatomy of pushdown transducers.This work was supported by the Natural Science and Engineering Research Council of Canada grants R220259 and OGP0041630.