Identification of the female-produced sex pheromone of the scarab beetle,Hoplia equina

Hoplia equina LeConte (Coleoptera: Scarabaeidae: Melolonthinae) is a beetle pest of cranberry beds in Massachusetts. Larvae feed on the roots of the cranberry plant, reducing yield as well as vine density. The female sex pheromone was identified as 2-tetradecanone. There were eight compounds found in the airborne volatiles collected from females that elicited antennal responses from males. Of the eight compounds tested (nonanal, decanal, dodecanal, 2-dodecanone, 2-tridecanone, 2-tetradecanone, 2-pentadecanone, and 2-hexadecanone), 2-tetradecanone was the only one that attracted male beetles in the field. Combining any of the other seven antennally active compounds with 2-tetradecanone did not increase male capture.     

Influence of Unmodified and β-Glycerophosphate Cross-Linked Chitosan on Anti-Candida Activity of Clotrimazole in Semi-Solid Delivery Systems

The combination of an antifungal agent and drug carrier with adjunctive antimicrobial properties represents novel strategy of complex therapy in pharmaceutical technology. The goal of this study was to investigate the unmodified and ion cross-linked chitosan’s influence on anti-Candida activity of clotrimazole used as a model drug in hydrogels. It was particularly crucial to explore whether the chitosans’ structure modification by β-glycerophosphate altered its antifungal properties. Antifungal studies (performed by plate diffusion method according to CLSI reference protocol) revealed that hydrogels obtained with chitosan/β-glycerophosphate displayed lower anti-Candida effect, probably as a result of weakened polycationic properties of chitosan in the presence of ion cross-linker. Designed chitosan hydrogels with clotrimazole were found to be more efficient against tested Candida strains and showed more favorable drug release profile compared to commercially available product. These observations indicate that novel chitosan formulations may be considered as promising semi-solid delivery system of clotrimazole.     

Synthesis and characterization of nanocomposites of thermoplastic polyurethane with both graphene and graphene nanoribbon fillers

Thermoplastic polyurethane (TPU) nanocomposites containing graphene and graphene nanoribbons were obtained by polymerizing 1,4-butanediol with two diisocyanates (namely, 1,6-hexane diisocyanate or isophorone diisocyanate), in which the nanofillers were previously dispersed. Raman spectroscopy and Transmission Electron Microscopy demonstrated the formation of few-layer graphene and graphene nanoribbons dispersed in the monomers. At variance to the methods commonly reported in literature, that used in this work consists of the direct exfoliation of graphite without any chemical manipulation. Apart from the obvious cost and ease advantages, the so-obtained graphene does not contain any carboxy or alkoxy groups formed during the exfoliation process, which, at variance, are typically present in the most commonly reported methods. This finding paves the way toward the large-scale production of graphene and its nanoribbons, which are considered even more interesting than graphene itself for many potential applications. The obtained nanocomposites show a peculiar thermal and rheological behavior due to the presence of the nanofillers and to their reinforcing or plasticizing effect exerted on the TPU matrices.     

Rapid Hormetic Responses of Photosystem II Photochemistry of Clary Sage to Cadmium Exposure

Five-day exposure of clary sage (Salvia sclarea L.) to 100 μM cadmium (Cd) in hydroponics was sufficient to increase Cd concentrations significantly in roots and aboveground parts and affect negatively whole plant levels of calcium (Ca) and magnesium (Mg), since Cd competes for Ca channels, while reduced Mg concentrations are associated with increased Cd tolerance. Total zinc (Zn), copper (Cu), and iron (Fe) uptake increased but their translocation to the aboveground parts decreased. Despite the substantial levels of Cd in leaves, without any observed defects on chloroplast ultrastructure, an enhanced photosystem II (PSII) efficiency was observed, with a higher fraction of absorbed light energy to be directed to photochemistry (Φ_PSΙΙ). The concomitant increase in the photoprotective mechanism of non-photochemical quenching of photosynthesis (NPQ) resulted in an important decrease in the dissipated non-regulated energy (Φ_NO), modifying the homeostasis of reactive oxygen species (ROS), through a decreased singlet oxygen (¹O₂) formation. A basal ROS level was detected in control plant leaves for optimal growth, while a low increased level of ROS under 5 days Cd exposure seemed to be beneficial for triggering defense responses, and a high level of ROS out of the boundaries (8 days Cd exposure), was harmful to plants. Thus, when clary sage was exposed to Cd for a short period, tolerance mechanisms were triggered. However, exposure to a combination of Cd and high light or to Cd alone (8 days) resulted in an inhibition of PSII functionality, indicating Cd toxicity. Thus, the rapid activation of PSII functionality at short time exposure and the inhibition at longer duration suggests a hormetic response and describes these effects in terms of “adaptive response” and “toxicity”, respectively.     

Analysis of the indoor GPS system as feedback for the robotic alignment of fuselages using laser radar measurements as comparison

The alignment of aircraft fuselages in the aerospace sector is currently done either manually or by complex, expensive automated systems. The manual process introduces a significant production delay and the automated systems are purpose-built and have limited flexibility, apart from its financial drawback. This work proposes a low-cost, high-flexibility system and, as part of it, evaluates the performance of a Rotary-Laser Automatic Theodolite (R-LAT) as a feedback source for the adaptive robot control of an anthropomorphic manipulator. In the proposed solution the robot carries a fuselage barrel and aligns it with respect to a second barrel. A high accuracy, frequency-modulated laser equipment is used to generate the reference system for the procedure. The measurements of the R-LAT are then verified with the frequency-modulated laser equipment in order to determine the linear and angular alignment tolerances achieved by the robot/R-LAT closed loop in a predefined work envelope. A throughout, step-by-step analysis of the measuring procedure is carried out to allow the recognition of error sources and thus the determination of an optimized method. These results identify the operation boundaries of the R-LAT within the process and yield its best configuration for the intended purpose. Using the EN ISO 9283 robot evaluation standard, the closed loop system was found to attain the nominal position with an average accuracy of 0.38 mm and 0.01°, contrasting with an average accuracy of 4.53 mm and 0.21° when the robot was operating in an open loop configuration.     

Mechanistic procedure for parameter determination of multiplicative decomposition based constitutive models

By exploiting the Clausius–Planck local energy dissipation inequality, a large strain, three-dimensional constitutive model has been developed for the monotonic and cyclic response prediction of various asphaltic materials. The model consists of a Zener non-linear, visco-elastic component acting in series with a stress dependent viscous component. A novel computational scheme has been developed for solution of the coupled system of equations expressing the interdependent response of these two in series components. An explicit, mechanistic, parameter determination procedure is presented for the laboratory determination of all necessary model parameters. Examples of model parameter determination and utilisation for prediction of the response of a recycled asphalt mix and a stone mastic asphalt mix are presented.     

Case study of the impact of toecap type on the microclimate in protective footwear

Protective footwear plays a critical role in work effectiveness and personal safety. It exhibits special properties due to the use of protective elements and materials, but these components may deteriorate its hygienic characteristics. This paper presents a study on the influence of toecap type on the microclimate in protective footwear (ankle boots). Toecaps made of metal and of a composite polymer material were evaluated. Changes in the footwear microclimate were monitored using a thermal foot model at a perspiration rate of about 5 g/h with and without the simulated movement function. The influence of the toecap material on the microclimate in the footwear was analyzed statistically. Under conditions of simulated movement, higher temperature and relative humidity values (about 32 °C and 90%) were recorded in the toe region of ankle boots with metal toecaps as compared to composite polymer toecaps (about 29 °C and 53%, respectively). These results suggest that protective footwear with composite toecaps ensures better ventilation of the foot during work.     

Cleaner production in Romanian textile industry: a case study

This paper reports the changes resulting from adopting environmentally sensitive criteria in Novatextile Pitesti, Romania. The changes have improved the operation of the production plant and reduced costs at the same time.     

Direct Ink Writing of a Preceramic Polymer and Fillers to Produce Hardystonite (Ca2ZnSi2O7) Bioceramic Scaffolds

The direct ink writing of an ink composed of a preceramic polymer and fillers was used to produce hardystonite (Ca₂ZnSi₂O₇) bioceramic scaffolds. Suitable formulations were developed for the extrusion of fine filaments (350 μm diameter) through a nozzle. The preceramic polymer was employed with the double purpose of contributing to the rheology of the ink by increasing its viscosity and of forming the hardystonite phase upon heat treatment by reacting with the fillers. A control of the rheology is essential when spanning features have to be produced, and therefore the main rheological characteristics of the inks were measured (flow curves, dynamic oscillation tests, viscosity recovery tests) and compared to models reported in the literature. Highly porous scaffolds (up to 80% total porosity) were produced and heat treated in air or in nitrogen atmosphere. The influence of the heat‐treatment atmosphere on the morphology, crystalline phase assemblage, and compressive strength of the scaffolds was investigated.     

Influence of macromolecular structure of novel 2- and 4-armed polylactides on their physicochemical properties and in vitro degradation process

The objective of this study was to analyse how macromolecular structure of polylactides influences their properties and degradation rate. To achieve this, novel 2- and 4-armed PDLLA and PLLA (noted as 2b and 4b) were synthesized by ring-opening method. 1,4-butanediol and pentaerythritol were used as initiators and stannous octoate was used as catalyst. The obtained polymers were investigated in terms of molecular weight by size exclusion chromatography, thermal properties by differential scanning calorimetry and thermogravimetry, and hydrophilicity by the contact angle measurements. The in vitro degradation test was carried out in PBS solution at 37 °C by means of the mass loss, water uptake, molecular weight and thermal properties changes. The branched polylactides including 2bPDLLA, 4bPDLLA, 2bPLLA and 4bPLLA were successfully synthesized and the average molecular weights were around 40-45 kDa. The numbers of arms in each polymer just slightly influenced the thermal properties and the contact angle. The crystallinity of 4bPLLA was 23 %, whereas for 2bPLLA it was 41 %. The degradation rates of both 2b and 4bPLLA were similar and the degradation process was similar only during first 7 weeks. After this period, the degradation rate of 4bPDLLA increased. Consequently, thermal properties and degradation profiles of the branched polymers would depend on plural factors, such as chain length and crystallinity in branched structure.