溶胶-凝胶和碳热还原法制备碳化钛的研究

以钛酸四丁酯和酚醛树脂为原料，乙二醇甲醚为溶剂，冰乙酸为稳定剂，在硝酸的催化下制备出凝胶前驱体，再将制得的前驱体于流通的氩气环境中经高温碳热还原得到碳化钛。讨论了各因素对凝胶时间的影响，用TG，XRD和SEM对制得的前驱体和产品进行了表征。结果表明，控制溶液的pH在2～3，水与钛酸四丁酯的物质的量比为6：1，溶剂与钛酸四丁酯的体积比为4：1时，得到的凝胶红棕色透明，所需时间最短；且由XRD和SEM分析可知，碳热还原反应是由TiO2经历一系列的低价态氧化物转变完成的；前驱体在氩气环境中经1400℃反应1h后生成的产物为TiC，其表面光洁，粒径分布均匀，大小为0．1～0．5μm。     

A study on the factors for improving the ethanol production from Jerusalem artichoke by Kluyveromyces fragilis

This study is to investigate the factors influencing the alcohol production byKluyveromyces fragilis using the juice of Jerusalem Artichoke tubers. The cell growth rate and ethanol production rate were stimulated by aeration and by the addition of unsaturated fatty acids and the cell mass production and the ethanol production were substantially improved. It was found that oxygen and unsaturated fatty acids added played a decisive role on the increase of alcohol tolerance of yeast.     

Cure monitoring via different techniques: Isothermal cure of an epoxy-novolac molding compound

The isothermal cure of an epoxy-novolac molding compound was studied by means of Fourier-transform infrared spectroscopy (FTIR) and dielectrometry (DE). Results obtained were compared with previous differential scanning calorimetric (DSC) observations. The behavior of epoxide conversion (_FTIR) measured via FTIR was found similar to (but not exactly coinciding with) the extent of cure (_DSC) determined previously by means of DSC. As for the DE analysis, directly measurable properties such as permittivity () and loss factor () varied in a complicated manner during the course of cure, showing strong dependence on both temperature and frequency. Other dielectric parameters (such as ionic conductivity, relaxed permittivity, and characteristic relaxation time) previously suggested in the literature as suitable for cure monitoring purposes were found difficult to determine within the limited frequency range (10⁰ to 10⁴ Hz) here. With some arbitrariness, the relative drop in log (at 100 Hz) was taken as an index (_DE) for the extent of cure. It was observed that _DE behaves in a manner similar to _FTIR and _DSC Comments on the application of these three techniques in the characterization of thermosetting systems were given.     

渣油加氢催化剂孔结构对反应活性的影响

在3L中型加氢试验装置上考察了渣油加氢脱硫催化剂孔结构对反应活性的影响，试验结果表明，当孔结构发生变化时，催化剂的脱硫、脱氮、脱残炭及脱金属反应活性呈现不同的变化规律。     

Mechanism of ZrTiO4 Synthesis by Mechanochemical Processing of TiO2 and ZrO2

High-energy ball milling initiates a solid-state reaction in an equimolar mixture of TiO₂ and ZrO₂. The first stage of ball milling induced the transformation of anatase TiO₂ to high-pressure phase TiO₂ (II), isostructural with ZrTiO₄. The formation of solid solutions monoclinic ZrO₂/TiO₂ and TiO₂ (II)/ZrO₂ was observed in the intermediate stage. Afterward, a nanosized ZrTiO₄ phase was formed in the milled product from the TiO₂ (II)/ZrO₂ solid solution. The sintering of the milled product at a temperature <1100°C was examined in situ by Raman spectroscopy. The full solid-state reaction toward ZrTiO₄ ceramic is completed at a temperature considerably lower than reported in the literature.     

磷铝酸盐水泥浆体的抗冻性研究

抗冻性是砼耐久性的重要方面,尤其影响北方地区砼工程的使用寿命。引气能提高砼的抗冻性,但同时又存在气泡的稳定性问题和砼其他性能的受损问题。若能提高砼中水泥浆体的抗冻性,则对提高砼耐久性更有意义。作者从宏观和微观两方面研究了磷铝酸盐水泥浆体的抗冻性,同时与硅酸盐水泥、硫铝酸盐水泥浆体进行了比较;采用压汞测孔方法测试了三种水泥浆体冻融前后的孔结构,并用分形理论分析了各自特征。结果证实:磷铝酸盐水泥具有优越的抗冻融性能,其自身优良的水化特性以及体系的低碱度是良好抗冻性的内在原因。     

Modeling and control of Wiener-type processes

We develop a simple relay feedback method to identify Wiener-type nonlinear processes. It separates the identification problem of the nonlinear static function from that of the linear dynamic subsystem to simplify the identification procedure significantly. Owing to the separation, the unmeasurable output of the linear dynamic subsystem can be obtained in a straightforward manner. Then, determining the model structure of the nonlinear static function becomes very simple and the estimates are robust to additive output noises. We can identify the whole activated region of the nonlinear static function as well as the ultimate information of the linear dynamic subsystem from only one relay feedback test. More information on the linear dynamic subsystem can be estimated by well-established linear system identification methods from additional tests. We use a nonlinear control strategy to compensate the nonlinear dynamics of the Wiener process so that the design parameters can be determined by usual tuning rules developed for linear processes and a high control performance can be achievable as in linear processes.     

柴油机废烟气驱动的热管LiBr制冷机的分析

工业过程中的废热排放造成了可用能的损失 ,又造成热污染和环境污染。针对一种利用热管回收废热的LiBr制冷机 ,采用柴油机烟气废热制冷实测后 ,对该系统的实测结果进行了火用分析 ,分析结果表明了这种新型废热LiBr制冷机有效利用了柴油机烟气余热 ,提高了系统的火用效率     

一种由WiFi智能插座构成的智能家届

本文首先叙述了智能家居的基本概念以及分析了智能家居中的通信技术,分析了WiFi技术在智能家居中的应用优势。接着讨论了串口WiFi的功能,以WiFi插座为例,描述了串口WiFi在智能家居中的具体应用。最后叙述了基于WiFi技术的智能家居系统。     

Isothermal crystallization behavior of isotactic polypropylene blended with small loading of polyhedral oligomeric silsesquioxane

The isothermal crystallization kinetics and morphology development of isotactic polypropylene (iPP) blended with small loading of nanostructure of polyhedral oligomeric silsesquioxane (POSS) were studied with differential scanning calorimetry (DSC), polarized optical microscopy (POM), and wide-angle X-ray diffraction (WAXD). The crystallization behaviors of iPP/POSS composites presented an unusual crystallization behavior during isothermal and nonisothermal crystallization conditions. The exothermic morphologies of isothermal and nonisothermal crystallization of iPP/POSS composites changed remarkably with increasing POSS. Moreover, the developments of spherulitic morphology for iPP/POSS composites showed that the major dispersed POSS molecules became nanocrystals first and then aggregated together forming thread- or network-like morphologies, respectively, depending on POSS content, which was observed. It implies that these major POSS nanocrystals' morphologies appeared as an effective nucleating agent and promoted the nucleation rate of iPP, whereas the minor dispersed POSS molecules that had slight miscibility between iPP retarded the nucleation and growth rates of iPP in the remaining bulk region. Therefore, the isothermal crystallization showed a single exothermic peak at pure iPP and POSS-1.0, whereas at POSS-2.0 and POSS-3.0, displayed the multi-exothermic peaks during isothermal crystallization. These faces indicated that POSS molecules were both influence on the transport of iPP chain in the melted state and on the free-energy of formation the critical nuclei of iPP assisted by the POSS structures were observed. Therefore, we postulated that the crystallization mechanisms of multi-exothermic peaks in isothermal crystallization may proceed to combine the “nucleating agent inducing nucleation of iPP event assisted by the POSS domains” that the nucleation of iPP does occur preferentially on the surfaces of the POSS “threads” or “networks” structures, and “nucleation and growth of iPP in the remaining bulk melted iPP region retarded by dispersed POSS molecules”. Therefore, effects of POSS content on the isothermal and nonisothermal crystallization behaviors of iPP/POSS composites due to the POSS molecules partially miscible with iPP, at very small loading of POSS molecules, promoted or retarded the rates of nucleation and growth of iPP depending on the POSS content and crystallization temperature were discussed.