基于重加权快速交替方向法的频谱感知

在认知无线电网络中,由于深衰落和低信噪比的影响,单个认知用户的宽带频谱检测性能较差,且算法复杂度较高。针对该问题,提出一种基于重加权快速交替方向法的频谱感知算法。利用目标函数的凸性,通过求导简化辅助变量的更新过程。对目标函数进行线性化处理,增加一个二次项,使待估变量更新时部分项线性化的增广拉格朗日函数成为严格凸函数,并使用迭代软阈值算法进行求解。在目标项中增加大权值抑制信号中的非零元素,获得接近于最小?0范数的解。实验结果表明,该算法能有效提高低信噪比环境下的检测概率和检测速度。     

Exothermic effect in the process of electron‐beam curing of epoxy resins

Temperature measurements have been performed in the process of electron‐beam curing of EB‐I and EB‐II epoxy resin systems. The influence of initiator content, resin type, and dose rate on the temperature of the systems was studied. Transverse and longitudinal temperatures of samples in the glass vessel were also analyzed. The nature of temperature curves varied with the different epoxy resin systems in the steel mold, but did not change with different contents of the initiator. At the same time, the heat had no effect on the gel fraction of epoxy resin systems. The temperature curve was greatly affected by the dose rate, and its peak value, peak width, and plateau value also increased with it. The transverse temperature of EB‐II glass vessel samples increased as the radiation dose increased and, in the same sample, the temperature reduced as the distance between the radiation center and the test point increased. The longitudinal temperature of EB‐I and EB‐II resin systems in a glass vessel decreased as the radiation depth increased. As the radiation dose increased, the temperature of the EB‐I resin system increased simultaneously, while that of the EB‐II resin system initially increased and then kept constant when the dose reached a certain value. The temperatures of these two resin systems decreased rapidly when the radiation process stopped. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2217–2222, 2004     

Effects of ultrasonic oscillation on processing behaviors of PS,EPDM, and PS/EPDM blend

In this study, the extrusion processing behaviors of polystyrene (PS), ethylene–propylene–diene terpolymer (EPDM), and their blend (PS/EPDM, 80/20) were studied by using a special ultrasonic oscillation extrusion system developed in our laboratory. The die pressure and volume flow rate were measured at different ultrasonic intensities and screw rotation speeds. The dependences on ultrasonic intensity of die pressure, volume flow rate, and apparent viscosity of polymers, as well as die swell at the same screw rotation speed were investigated. The effects of screw rotation speed on the processing behaviors of polymers and their blend at the same ultrasonic intensity were also studied. The experimental results showed that in the presence of ultrasonic irradiation, the processibilities of polymers and their blend were improved. Their possible mechanism is discussed in this article. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1856–1863, 2006     

高支化度酯类增塑剂的结构鉴定

利用AV50 0核磁共振波谱仪鉴定了一种从聚氨酯材料中分离出的增塑剂。这是一种新型的性能优良的耐迁移性脂肪族增塑剂。使用的手段有红外光谱 ,1 H NMR ,1 3C NMR ,1 3C 1 HCOSY ,1 H 1 HCOSY以及DEPT等技术。     

Preparation of narrowly distributed nanoparticles of poly(n‐butyl methacrylate‐co‐vinyl pyrrolidone) through microemulsion polymerization

Narrowly distributed nanoparticles of poly (n‐butyl methacrylate‐co‐vinyl pyrrolidone) were prepared through microemulsion polymerization with a nonionic surfactant of Tween‐80 as emulsifier (6 wt % of the latex) and n‐butanol as coemulsifier. The polymerizations were initiated with benzoylperoxide (BPO), potassium persulfate (KPS), KPS/ferric sulfate (FeSO₄), and BPO/FeSO₄, respectively, where the initiation in the case of BPO/FeSO₄ took place mainly at the interphase between the oil phase and the reaction media. Namely, this interfacial‐initiated microemulsion polymerization resulted in larger particles with relatively narrower particle size distribution as well as higher limiting monomer conversion but lower polymerization rate compared with the polymerization initiated with KPS/FeSO₄. In this article, the influences of initiation method, monomer ratio, and addition of water‐soluble components on microemulsion polymerization and latex particle size were studied to discuss the mechanism of interfacial‐initiated microemulsion polymerization. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2334–2340, 2004     

Synthesis and properties of polystyrene‐b‐poly(ethylene oxide)‐b‐polystyrene triblock copolymers

A series of well‐defined and property‐controlled polystyrene (PS)‐b‐poly(ethylene oxide) (PEO)‐b‐polystyrene (PS) triblock copolymers were synthesized by atom‐transfer radical polymerization, using 2‐bromo‐propionate‐end‐group PEO 2000 as macroinitiatators. The structure of triblock copolymers was confirmed by ¹H‐NMR and GPC. The relationship between some properties and molecular weight of copolymers was studied. It was found that glass‐transition temperature (T_g) of copolymers gradually rose and crystallinity of copolymers regularly dropped when molecular weight of copolymers increased. The copolymers showed to be amphiphilic. Stable emulsions could form in water layer of copolymer–toluene–water system and the emulsifying abilities of copolymers slightly decreased when molecular weight of copolymers increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 727–730, 2006     

Al_2O_3负载TiO_2光催化氧化剂的制备与性能试验

以钛酸四丁酯为钛源、Al2O3为载体,采用浸渍法制备了一系列TiO2/Al2O3复合氧化物光催化剂。以光催化降解甲醛为探针反应,考察了催化剂的光催化活性。并采用XRD、SEM技术对催化剂进行了表征。考察了催化剂的焙烧温度、钛含量、反应温度等因素对甲醛光催化降解率的影响。结果表明:400℃是制备TiO2/Al2O3光催化剂的最佳焙烧温度;在TiO2负载质量为5.0%的复合氧化物光催化剂催化效果最好,甲醛的降解率达到58.4%。随着反应温度的升高,复合氧化物光催化剂的催化性能下降,由25℃时的58.4%的甲醛降解率下降到50℃时的4.8%。     

Novel nitrogen‐containing epoxy resin. II. Cure kinetics by differential scanning calorimetry

The isothermal and nonisothermal cure behaviors of a novel nitrogen‐containing epoxy resin (XT resin) were studied by differential scanning calorimetry (DSC). Various kinetic parameters and details of cure process were obtained based on the Avrami theory. The results indicated that Avrami method is suitable for calculating the kinetic parameters up to the gel point at least. The apparent activation energy (E_a) for isothermal cure process was in agreement with that for nonisothermal cure process. E_a value in the early stage (78.5–81.0 KJ mol^?1) was about three times than that in the later stage (23.3–26.5 KJ mol^?1). The kinetic results from Avrami theory may present a combined effect of all factors, and which is helpful to understand the cure technique for XT–DDS system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3483–3489, 2006     

Oil absorbents based on styrene–butadiene rubber

Four oil absorbents based on styrene–butadiene (SBR)—pure SBR (PS), 4‐tert‐butylstyrene–SBR (PBS), EPDM–SBR network (PES), and 4‐tert‐butylstyrene‐EPDM‐SBR (PBES)—were produced from crosslinking polymerization of uncured styrene–butadiene rubber (SBR), 4‐tert‐butylstyrene (tBS), and ethylene–propylene–diene terpolymer (EPDM). The reaction took place in toluene using benzoyl peroxide (BPO) as an initiator. Uncured SBR was used as both a prepolymer and a crosslink agent in this work, and the crosslinked polymer was identified by IR spectroscopy. The oil absorbency of the crosslinked polymer was evaluated with ASTM method F726‐81. The order of maximum oil absorbency was PBES > PBS > PES > PS. The maximum values of oil absorbency of PBES and PBS were 74.0 and 69.5 g/g, respectively. Gel fractions and swelling kinetic constants, however, had opposite sequences. The swelling kinetic constant of PS evaluated by an experimental equation was 49.97 × 10^?2 h^?1. The gel strength parameter, S, the relaxation exponent, n, and the fractal dimension, d_f, of the crosslinked polymer at the pseudo‐critical gel state were determined from oscillatory shear measurements by a dynamic rheometer. The morphologies and light resistance properties of the crosslinked polymers were observed, respectively, with a scanning electron microscope (SEM) and a color difference meter.     

基于语类结构的大学英语教学模式探讨

探讨语类理论指导下的大学英语教学模式,提出了该教学模式的五个阶段:判断语篇归类,输入语境知识,形成语类结构范式,独立创作语篇和评价学生语篇。这五个阶段循环往复,能够把阅读和写作教学有效地结合起来,使两者相互促进。